Red PLCC4 Surface Mount LED

Red PLCC4 Surface Mount LED
OVSASBC2R8
x
x
x
x
x
High intensity with low power consumption
White PLCC4 packaged in 8 mm tape on 7” diameter reel
Compatible with automatic placement equipment
Dimensions: 3.5 x 2.8 x 1.95 mm
120° viewing angle
Product Photo Here
The OVSASBC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens
optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides.
Applications
x Traffic lights
x Signal and symbol luminaire
x Mono-color indicators
x Backlighting (LCD, switches, displays and illuminated advertising)
x Interior automotive lighting (instrumentation clusters)
x Safety marker lights (steps, exit ways)
RoHS
Part Number
Material
Emitted Color
Intensity Typ. mcd
Lens Color
OVSASBC2R8
AlInGaP
Red
900
Water Clear
Moisture
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A
04/06
Page 1 of 4
Red PLCC4 Surface Mount LED
OVSASBC2R8
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range
-40 ~ +100° C
Operating Temperature Range
-40 ~ +100° C
Junction Temperature
110° C
Reverse Voltage
5V
Continuous Forward Current
70 mA
Peak Forward Current (10% Duty Cycle, PW ”—VHF
200 mA
Power Dissipation
225 mW
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
MIN
TYP
MAX
UNITS
CONDITIONS
IV
Luminous Intensity
560
900
----
mcd
IF = 50 mA
VF
Forward Voltage
----
2.5
3.2
V
IF = 50 mA
IR
Reverse Current
----
----
10
µA
VR = 5 V
Dominant Wavelength
620
628
635
nm
IF = 50 mA
50% Power Angle
----
120
----
deg
IF = 50 mA
D
2
PARAMETER
½
Standard Bins (IF = 50 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown.
Orders for OVSASBC2R8 may be filled with any or all bins contained as below.
Luminous Intensity
(mcd)
1400
1120
W1
900
V2
710
V1
560
U2
620
628
635
Luminous intensity is at
U2 bin or above.
Dominant Wavelength (nm)
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 04/06
Page 2 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com
Red PLCC4 Surface Mount LED
OVSASBC2R8
Typical Electro-Optical Characteristics Curves
%
mA
V
Forward Current vs Forward Voltage
Half Power
mA
Relative Luminous Intensity vs Forward Current
WL = 23 nm
Rth j-s=200°C/W
mA
Rth j-a=350°C/W
°C
nm
Relative Luminous Intensity vs Wavelength
Maximum Forward DC Current vs Ambient
Temperature
v
50% Power Angle: 120°
A
Spatial Distribution
Reverse Current vs Reverse Voltage
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A
04/06
Page 3 of 4
Red PLCC4 Surface Mount LED
OVSASBC2R8
Reel Dimensions: 7-inch reel
Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel
Moisture Resistant Packaging
Label
Aluminum Moisture-proof Bag
Desiccant
Bar Code Label
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 04/06
Page 4 of 4
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com