4-Pin LED Lamp (7.6 mm) OVFSxxC8 • • • • • Packaged in tubes Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Mono-colors Pb-free Product Photo Here The OVFSxxC8 series is designed with higher forward voltage to maximize brightness and incorporates a lowprofile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square package allows high-density arrays to form light engines. Applications • Automotive: Rear stop/turn signal lamps/truck marker lamps • Mood-setting decoration and landscape lighting • Special decorative interior/exterior lighting • Special effects stage lighting • • Illumination for signs and channel letters Traffic signals, pedestrian and walkway signs Part Number DIM A Beam Angle Material Emitted Color Flux Typ. mlm Lens Color OVFSAAC8 [1.50] .059 100° AllnGaP Amber 8000 Clear OVFSB7C8 [1.29] .051 70° InGaN Blue 2500 Clear OVFSG7C8 [1.29] .051 70° InGaN Green 8500 Clear OVFSRAC8 [1.50] .059 100° AllnGaP Red 8000 Clear OVFSW6C8 [1.90] .075 60° InGaN White 7000 Clear RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 09/2012 Page 1 of 8 4-Pin LED Lamp OVFSxxC8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Blue, Green, Red, Amber, White -40 ~ +100 °C Blue, Green, Red, Amber -40 ~ +100 °C -40 ~ +95 °C White 5V Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1 kHz) Power Dissipation Blue, Green, White 35 mA Red, Amber 70 mA Blue, Green, White 100 mA Red, Amber 200 mA Blue, Green, White 154 mW Red, Amber 210 mW 260° C / 3 sec max Lead Soldering Temperature (3mm from the base of the epoxy bulb) Electrostatic Discharge Classification (JEDE-JESD22-A114F) Optical and Electrical Characteristics SYMBOL Φv VF PARAMETER COLOR Luminous Flux Forward Voltage Class 2 (TA = 25° C) MIN TYP MAX Blue 1650 2500 ---- Green 5500 8500 ---- White 3850 7000 ---- Red 5500 8000 ---- Amber 6600 8000 ---- Blue & Green ---- 3.6 4.4 White ---- 3.6 4.4 Red, Amber ---- 2.5 3.0 ---- ---- 100 Blue 460 470 475 Green 515 527 535 Red 620 628 637 Amber 584 591 599 UNITS CONDITIONS IF = 30 mA mlm IF = 70 mA V IF = 30 mA IF = 70 mA Blue & Green IR White Reverse Current µA VR = 5 V Red, Amber λD x y 2Θ½H-H Dominant Wavelength IF = 70 mA 0.2895 Chromaticity Coordinates White 50% Power Angle IF = 30 mA nm IF = 30 mA 0.2905 Blue & Green ---- 70 ---- White ---- 60 ---- Red, Amber ---- 100 ---- deg IF = 30 mA IF = 70 mA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 Page 2 of 8 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com 4-Pin LED Lamp OVFSxxC8 Standard Bins LEDs are sorted to luminous flux (Φ), luminous intensity (IV), forward voltage (VF), and dominant wavelength (λD) bins shown. Each tube will consist of a single intensity bin, forward voltage bin and dominant wavelength bin. Orders may be filled with any of the intensity bins or color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Luminous Intensity (IV ) @ 30mA Forward Voltage (VF ) @ 30mA Dominant Wavelength (nm) Blue: OVFSB7C8 BLUE: OVFSB7C8 & GREEN: OVFSG7C8 Blue: OVFSB7C8 IV Code Min (mlm) Max (mlm) F0 1650 2220 G0 2200 2750 H0 2750 3300 Green: OVFSG7C8 IV Code Min (mlm) Max (mlm) nm Code VF Code Min (V) Max (V) 27 2.8 3.0 Min (nm) Max (nm) B3 460 465 B4 465 470 B5 470 475 28 3.0 3.2 29 3.2 3.4 2a 3.4 3.6 2b 3.6 3.8 nm Code Min (nm) Max (nm) Green: OVFSG7C8 M0 5500 6600 2c 3.8 4.0 G6 515 520 N0 6600 8730 2d 4.0 4.2 G7 520 525 P0 8730 11,000 2e 4.2 4.4 G8 525 530 Q0 11,000 13,200 G9 530 535 Luminous Intensity (IV ) @ 70mA Forward Voltage (VF ) @ 70mA Dominant Wavelength (nm) Amber: OVFSAAC8 Amber: OVFSAAC8 & Red: OVFSRAC8 Amber: OVFSAAC8 IV Code Min (mlm) Max (mlm) N0 6600 8730 P0 8730 11,000 Q0 11,000 13,200 Red: OVFSRAC8 IV Code Min (mlm) Max (mlm) M0 5500 6600 N0 6600 8730 P0 8730 11,000 Q0 11,000 13,200 VF Code Min (V) nm Code Min (nm) Max (nm) Max (V) A3 587 590 590 593 593 596 23 2.0 2.2 A4 24 2.2 2.4 A5 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 Red: OVFSRAC8 nm Code Min (nm) Max (nm) RE 620 637 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 09/2012 Page 3 of 8 4-Pin LED Lamp OVFSxxC8 Standard Bins (IF = 30 mA) LEDs are sorted to luminous flux (Φ), forward voltage (VF), and chromaticity coordinates (x,y) bins shown. Each tube will consist of a single intensity bin, forward voltage bin, and chromaticity bin. Orders may be filled with any of the intensity bins or color bins listed in the following tables. Optek will not accept orders for single intensity bins or single color bins. Φ Bin Luminous Flux Min (mlm) Max (mlm) M0 5500 6600 N0 6600 8730 P0 8730 11,000 VF Forward Voltage Bin Min (V) Max (V) 27 2.8 3.0 28 3.0 3.2 29 3.2 3.4 2a 3.4 3.6 2b 3.6 3.8 2c 3.8 4.0 2d 4.0 4.2 2e 4.2 4.4 Chromaticity Coordinates (x, y) We Rank Wf Wg Wh Cx 0.2640 0.2735 0.2808 0.2720 0.2720 0.2808 0.2880 0.2800 0.2735 0.2830 0.2895 0.2808 0.2808 0.2895 0.2960 0.2880 Cy 0.2670 0.2860 0.2740 0.2575 0.2575 0.2740 0.2620 0.2480 0.2860 0.3050 0.2905 0.2740 0.2740 0.2905 0.2760 0.2620 Wj Rank Wk Wm Wn Cx 0.2830 0.2950 0.2998 0.2895 0.2895 0.2998 0.3045 0.2960 0.2950 0.3070 0.3100 0.2998 0.2998 0.3100 0.3130 0.3045 Cy 0.3050 0.3210 0.3028 0.2905 0.2905 0.3028 0.2865 0.2760 0.3210 0.3370 0.3150 0.3028 0.3028 0.3150 0.2970 0.2865 Wp Rank Wq Wr Ws Cx 0.3070 0.3185 0.3200 0.3100 0.3100 0.3200 0.3215 0.3130 0.3185 0.3300 0.3300 0.3200 0.3200 0.3300 0.3300 0.3215 Cy 0.3370 0.3485 0.3270 0.3150 0.3150 0.3270 0.3075 0.2970 0.3485 0.3600 0.3390 0.3270 0.3270 0.3390 0.3180 0.3075 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 Page 4 of 8 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com 4-Pin LED Lamp OVFSxxC8 Typical Electro-Optical Characteristics Curves — OVFSB7C8 (Blue) & OVFSG7C8 (Green) Forward Current vs Forward Voltage Relative Luminous Flux vs Wavelength Relative Luminous Flux vs Forward Current Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 70° Angular Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 09/2012 Page 5 of 8 4-Pin LED Lamp OVFSxxC8 Typical Electro-Optical Characteristics Curves — OVFSAAC8 (Amber) & OVFSRAC8 (Red) Forward Current vs Forward Voltage Relative Luminous Flux vs Wavelength Relative Luminous Flux vs Forward Current Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 100° Angular Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 Page 6 of 8 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com 4-Pin LED Lamp OVFSxxC8 Typical Electro-Optical Characteristics Curves — OVFSW6C8 (White) Forward Current vs Forward Voltage Relative Luminous Flux vs Wavelength Relative Luminous Flux vs Forward Current Maximum Forward DC Current vs Ambient Temperature 50% Power Angle: 60° Angular Distribution Reverse Current vs Reverse Voltage OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 09/2012 Page 7 of 8 4-Pin LED Lamp OVFSxxC8 Packaging 60/Tube Aluminum Moisture-proof Bag Bar Code Label Desiccant OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 Page 8 of 8 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com