Infrared Light Emitting Diode OP205CL Features: • • • • • High power GaAIAs Narrow beam angle—near parallel beam 875 nm wavelength TO-46 package Wide operating temperature range Description: The OP205CL is a high efficiency GaAIAs infrared LED mounted in a TO-46 metal can package. The device features a special dome lens that allows a very narrow beam angle. The result is a near parallel beam that is useful in applications that requires a collimated light source with a uniform intensity pattern. OP205CL LED is mechanically and spectrally matched to OP800 series phototransistors. Ordering Information Applications: • • Optical encoders • Long distance sensing Triangulation sensors Part Number LED Peak Wavelength Total Beam Angle Lead Length OP205CL 875 nm 10° 34mm Relative Radiant Intensity vs. Linear Displacement 120% Relative Radiant Intensity 100% L = 2mm L = 3mm 80% L = 5mm 60% L=2-5mm Pinhole 40% 0mm D 20% 0% -3.0 -2.4 -1.8 -1.2 -0.6 0 0.6 1.2 1.8 2.4 3.0 Linear Displacement—D (mm) RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 10/06 Page 1 of 2 Infrared Light Emitting Diode OP205CL Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40° C to +125° C Operating Temperature Range -40° C to +100° C 260° C(1) Lead Soldering Temperature Reverse Voltage 3.0 V Continuous Forward Current 50 mA 160 mW(2) Power Dissipation Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS IF = 50mA(3) PO Radiant Intensity 8.5 12.0 - mW VF Forward Voltage - - 2.0 V IF = 50mA IR Reverse Current - - 10 µA VR = 3.0V λP Peak Emission Wavelength - 875 - nm IF = 20mA Total Emission Angle at Half Power Points - 6 10 Deg. IF = 20mA ΘHP Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. De-rate linearly at 2.17 mW/° C above 25° C. 3. Total Optical Power (PO) is measured by OPTEK Technology equipment. Relative Radiant Intensity vs. Forward Current vs. Temperature 350% Normalized at IF = 20mA, TA = 20°C. Temperatures stepped in 20°C Increments 1.6 -40°C Temperatures stepped in 20°C Increments -40°C 1.5 250% 200% 150% 100°C 100% 1.4 100°C 1.3 1.2 50% 0% 0 Forward Voltage (V) Relative Radiant Intensity 300% Forward Voltage vs. Forward Current vs. Temperature 10 20 30 Forward Current (mA) 40 50 1.1 0 10 20 30 40 50 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 10/06 Page 2 of 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com