LRMS-2MH+ LRMS-2MH Surface Mount Frequency Mixer Level 13 5 to 1000 MHz (LO Power +13dBm) Maximum Ratings Features Operating Temperature • low conversion loss, 6.72 dB typ. • good L-R isolation, 39 dB typ. -40°C to 85°C Storage Temperature -55°C to 100°C RF Power 200mW IF Current 40mA CASE STYLE: QQQ130 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Permanent damage may occur if any of these limits are exceeded. •HF/VHF/UHF •instrumentation •cellular Pin Connections LO1 RF4 IF5 GROUND2,3,6 Electrical Specifications FREQUENCY (MHz) Outline Drawing LO/RF CONVERSION LOSS (dB) Mid-Band m IF fL-fU 5-1000 DC-1000 LO-RF ISOLATION (dB) L M LO-IF ISOLATION (dB) U L M U — X σ Max. Total Range Max. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. Typ. Min. 6.72 .08 8.5 9.5 55 40 39 20 22 16 52 35 30 17 18 12 1 dB COMP.: +9 dBm typ. L = low range [fL to 10 fL] m= mid band [2fL to fU/2] PCB Land Pattern M = mid range [10 fL to fU/2] U = upper range [fU/2 to fU] Typical Performance Data Frequency (MHz) RF 5.00 10.00 20.00 35.15 50.00 Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .400 10.16 B .31 7.87 C .200 5.08 D .10 2.54 E .010 0.25 H .420 10.67 J .120 3.05 K .060 1.52 L .100 2.54 M .020 0.51 F .100 2.54 G .050 1.27 wt grams 0.55 Demo Board MCL P/N: TB-44+ Suggested PCB Layout (PL-083) LO 35.00 40.00 50.00 65.15 80.00 Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) LO +13dBm LO +13dBm LO +13dBm LO +13dBm LO +13dBm 6.87 6.71 6.81 6.82 6.86 67.46 61.14 55.36 50.90 48.33 60.42 54.89 49.28 44.75 42.38 1.26 1.16 1.12 1.13 1.13 2.23 2.14 2.06 2.13 2.09 65.30 100.00 155.76 200.00 246.21 95.30 70.00 125.76 170.00 216.21 6.76 6.73 6.54 6.54 6.62 46.42 44.03 43.58 42.48 40.92 40.39 37.91 37.14 36.16 34.54 1.13 1.14 1.15 1.16 1.19 2.04 2.02 1.97 1.95 1.98 306.52 366.82 427.12 500.00 577.88 276.52 336.82 397.12 470.00 547.88 6.76 6.79 6.59 6.52 6.74 38.19 34.91 32.18 29.15 26.48 31.82 28.84 26.69 24.87 22.60 1.23 1.29 1.35 1.44 1.54 1.93 2.04 2.09 2.11 2.15 668.33 758.79 849.24 909.55 1030.00 638.33 728.79 819.24 879.55 970.00 7.07 7.37 7.86 8.30 8.73 24.41 22.47 20.85 19.83 19.01 20.55 18.54 16.52 15.54 14.41 1.68 1.82 1.98 2.18 2.43 2.21 2.31 2.47 2.56 2.61 Electrical Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. C M151107 LRMS-2MH DJ/FL/CP/AM 150819 Page 1 of 2 LRMS-2MH+ LRMS-2MH Performance Charts at IF Freq of 30 MHz LRMS-2MH CONVERSION LOSS 8.0 7.0 6.0 LO=+10 dBm 0 LO=+13 dBm 60 50 40 30 10 0 100 200 300 400 500 600 700 800 900 1000 FREQUENCY (MHz) LRMS-2MH RF VSWR 2.6 LO=+13 dBm LO=+16 dBm 60 100 200 300 400 500 600 700 800 900 1000 FREQUENCY (MHz) LO=+10 dBm LO=+13 dBm 20 LO=+16 dBm LRMS-2MH L-I ISOLATION 70 LO=+16 dBm LO=+10 dBm LO=+13 dBm LO=+16 dBm 2.4 2.2 50 2.0 VSWR ISOLATION (dB) LO=+10 dBm 70 9.0 5.0 40 1.8 1.6 30 1.4 20 1.2 10 0 100 200 300 FREQUENCY (MHz) 400 500 1.0 0 100 200 300 400 500 600 FREQUENCY (MHz) LRMS-2MH LO VSWR 4.0 LO=+10 dBm 3.5 700 800 900 1000 LRMS-2MH IF VSWR LO=+13 dBm 2.0 LO=+16 dBm LO=+10 dBm 1.8 VSWR 3.0 VSWR LRMS-2MH L-R ISOLATION 80 ISOLATION (dB) CONVERSION LOSS (dB) 10.0 2.5 2.0 LO=+13 dBm LO=+16 dBm 1.6 1.4 1.2 1.5 1.0 1.0 0 100 200 300 400 500 600 700 FREQUENCY (MHz) 800 900 1000 0 100 200 300 400 500 600 700 800 900 1000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2