High IP3 Frequency Mixer HJK-372H+ Level 17 (LO Power +17 dBm) 420 to 3730 MHz The Big Deal • High IP3, +24 dBm, typ. • High isolation, 35 dB L-R, 33 dB L-I typ. • Low conversion loss, 7.5 dB typ. • Wideband. 420 to 3730 MHz CASE STYLE: TTT1114 Product Overview Mini-Circuits’ HJK-372H+ is a surface mount, level 17 FET-based frequency mixer with an RF frequency range from 420 to 3730 MHz, LO frequency range from 610 to 3920 MHz, and IF frequency range from 100 to 600 MHz. Its double-balanced FET configuration achieves an outstanding combination of low conversion loss, low noise figure and high IP3 performance without the need for a DC bias current, ideal for sensitive receiver applications including base stations, PCS, fixed satellite and more. The mixer comes housed in a miniature, shielded 6-lead package (0.38 x 0.50 x 0.15”), saving space in tight PCB layouts. Feature Advantages High IP3, +24 dBm typ. Minimizes third order intermodulation products and improves dynamic range in demanding environments where multiple carriers may be present. Low conversion loss, 7.5 dB Preserves signal integrity from input to output by reducing undesirable signal responses that can degrade system performance and enables lower NF front ends, improving system sensitivity. Good P1dB compression, +14 dBm at input Whereas the 1-dB compression point of a diode-based mixer is typically 4 to 6 dB lower than the LO power level, the 1-dB compression point of HJK-372H+ FET-based mixer is +14 dBm higher than the LO signal power. This results in excellent linearity and high dynamic range. High L-R and L-I isolation, • L-R, 35 dB typ. • L-I, 33 dB typ. Preserves signal integrity from input to output and reduces undesired signal responses that can interfere with system performance. Small size (0..38 x 0.50 x 0.15”) Saves PCB real estate and accommodates crowded layouts. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 High IP3 Frequency Mixer HJK-372H+ Level 17 (LO Power +17 dBm) 420 to 3730 MHz Maximum Ratings Operating Temperature Storage Temperature Features • high IP3, 24 dBm typ. • good L-R isolation, 35 dB typ., L-I isolation, 33dB typ. • wideband -40°C to 85°C -55°C to 100°C LO Power +19 dBm RF Power +20 dBm CASE STYLE: TTT1114 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Permanent damage may occur if any of these limits are exceeded. • radar • base stations • cellular • PCS • fixed satellite Pin Connections LO2 RF1 IF3 GROUND4,5,6 Electrical Specifications at 25°C Parameter Outline Drawing PCB Land Pattern PCB Land Pattern Min. Max. Unit 3730 MHz — 3920 MHz 100 — 600 MHz Conversion Loss — 7.5 9.2 dB LO to RF Isolation 23 35 — dB LO to IF Isolation 24 33 — dB IP3 — 24 — dBm RF Input Power at 1 dB Compression — +14 — dBm Frequency Range, RF 420 Frequency Range, LO 610 Frequency Range, IF Typ. Typical Performance Data Suggested Layout, Tolerance to be within ±.002 Suggested Layout, Tolerance to be within ±.002 RF Outline Dimensions ( inch mm ) B C D E .38 .50 9.65 12.70 A .15 3.81 .020 0.51 .075 1.91 F Frequency (MHz) G H J K .250 .425 6.35 10.80 .187 4.75 .050 1.27 .050 1.27 L M N P Q R S T wt. .070 .270 .540 .060 .095 .445 .208 .415 grams 1.78 6.86 13.72 1.52 2.41 11.30 5.28 10.54 0.8 420.10 540.10 1060.10 1560.10 2070.10 2450.10 2590.10 2710.10 2850.10 2970.10 3090.10 3230.10 3350.10 3490.10 3610.10 3730.10 LO 610.10 730.10 1250.10 1750.10 2260.10 2640.10 2780.10 2900.10 3040.10 3160.10 3280.10 3420.10 3540.10 3680.10 3800.10 3920.10 Conversion Loss (dB) Isolation L-R (dB) Isolation L-I (dB) VSWR RF Port (:1) VSWR LO Port (:1) IP3 (dBm) LO +17dBm LO +17dBm LO +17dBm LO +17dBm LO +17dBm LO +17dBm 7.79 7.47 7.23 7.00 7.21 7.31 7.63 7.72 7.63 7.67 7.78 7.64 7.61 7.65 7.63 7.79 32.76 34.14 40.41 44.98 44.18 46.25 46.11 47.29 44.56 41.76 42.90 41.77 37.53 33.46 31.69 29.97 41.16 39.01 38.70 36.66 33.39 33.53 34.45 34.46 34.91 35.49 35.69 35.35 35.54 35.49 35.33 35.67 1.25 1.19 1.13 1.28 1.22 1.60 1.65 1.65 1.59 1.54 1.47 1.38 1.37 1.39 1.48 1.53 4.41 4.34 4.06 3.50 3.27 3.42 3.38 3.37 3.28 3.15 2.99 2.81 2.61 2.40 2.20 1.98 24.35 24.80 25.00 24.98 25.14 23.33 23.17 23.43 23.86 24.97 24.61 25.56 25.82 25.68 26.52 26.54 Electrical Schematic Demo Board MCL P/N: TB-12 Suggested PCB Layout (PL-079) LO IF RF Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M151107 HJK-372H+ ED-14712/2 WL/CP/AM 150731 Page 2 HJK-372H+ Performance Charts HJK-372H+ CONVERSION LOSS LO=+15dBm ISOLATION (dB) 50 11 9 7 40 35 30 60 55 50 45 40 35 30 25 20 15 10 400 5.0 HJK-372H+ L-I ISOLATION LO=+15dBm 2.6 LO=+17dBm LO=+19dBm 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) HJK-372H+ RF VSWR 3.0 LO=+15dBm LO=+17dBm LO=+19dBm 2.2 1.8 1.4 LO=+15dBm LO=+17dBm LO=+19dBm 1.0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) HJK-372H+ LO VSWR LO=+15dBm LO=+17dBm 800 1200 LO=+19dBm 1.8 VSWR 3.0 1600 2000 2400 2800 FREQUENCY (MHz) 3200 3600 HJK-372H+ IF VSWR 2.0 4.0 LO=+15dBm LO=+17dBm LO=+19dBm 1.6 1.4 1.2 2.0 1.0 400 20 400 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 6.0 800 1200 1600 2000 2400 2800 3200 3600 4000 FREQUENCY (MHz) 1.0 100 200 300 400 FREQUENCY (MHz) 500 600 HJK-372H+ IP3 40 LO=+15dBm 35 IP3 (dBm) 45 25 5 400 VSWR 55 LO=+19dBm ISOLATION (dB) 13 LO=+17dBm VSWR CONVERSION LOSS (dB) 15 HJK-372H+ L-R ISOLATION LO=+17dBm LO=+19dBm 30 25 20 15 400 800 1200 1600 2000 2400 2800 FREQUENCY (MHz) 3200 3600 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3