Ceramic LFCN-1200+ LFCN-1200 Low Pass Filter 50Ω DC(1) to 1200 MHz Features Maximum Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input* 10W max. at 25°C * Passband ratiing, derate linearly to 3.5W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. Pin Connections RF IN 1 RF OUT 3 GROUND2,4 CASE STYLE: FV1206 • excellent power handling, 10W • small size • 7 sections • temperature stable • LTCC construction • protected by U.S Patent 6,943,646 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 3000 Reel Size 7” • harmonic rejection • VHF/UHF transmitters/receivers • lab use Electrical Specifications(1,2) at 25°C Outline Drawing Parameter (ON TOP) Insertion Loss Freq. Cut-Off VSWR Pass Band (ON TOP) Rejection Loss Stop Band VSWR F# Frequency (MHz) Min. Typ. Max. Unit DC-F1 F2 DC-F1 F3 F4-F5 F6 DC-1200 1530 DC-1200 1865 2000-5000 6200 — — — 20 — — — 3.0 1.2 — 30 20 1.0 — — — — — dB dB :1 dB dB dB F3-F6 1865-6200 — 20 — :1 (1) In Application where DC voltage is present at either input or output ports, coupling capacitors are required. Alternatively, if DC pass IN-OUT is required, Mini-Circuits’ “D” suffix version of this model will support DC IN-OUT, and provide>100 MOhm isolation to ground. (2) Measured on Mini-Circuits Characterization Test Board TB-270. PCB Land Pattern ATTENUATION (dB) Typical Frequency Response Electrical Schematic R F IN 40 R F OUT 20 3 1 DC F6 F5 F1 F2 F3 F4 FREQUENCY Typical Performance Data at 25°C Suggested Layout, Tolerance to be within ±.002 Frequency (MHz) Outline Dimensions ( inch mm ) A .126 3.20 B .063 1.60 C .037 0.94 D .020 0.51 E .032 0.81 F .009 0.23 G .169 4.29 H .087 2.21 J .024 0.61 K .122 3.10 L .024 0.61 M .087 2.21 N .012 0.30 P wt .071 grams 1.80 .020 Demo Board MCL P/N: TB-270 Suggested PCB Layout (PL-137) Insertion Loss (dB) 50.00 500.00 750.00 1200.00 1480.00 1750.00 2000.00 2375.00 3000.00 3500.00 4500.00 5000.00 6050.00 6500.00 7000.00 1.02 1.18 1.20 1.16 2.15 9.43 16.56 25.19 31.60 36.20 39.49 34.07 26.74 15.00 37.77 LFCN-1200 VSWR 100 40 30 VSWR INSERTION LOSS (dB) 0.04 0.30 0.34 0.73 2.79 24.69 31.88 40.40 39.23 37.97 36.37 36.23 22.99 12.01 16.10 LFCN-1200 INSERTION LOSS 50 VSWR (:1) 20 10 10 0 1 0 1000 2000 3000 4000 5000 6000 7000 0 1000 2000 FREQUENCY (MHz) 3000 4000 5000 6000 7000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. K M151107 LFCN-1200 EDR-6469/3 RVN/AD/CP/AM 150817