Coaxial Pulse Amplifier 50Ω Non-Inverting ZPUL-30P 0.0025 to 700 MHz Features • wide bandwidth 2.5 kHz to 700 MHz, useable to 1000 MHz • excellent flatness, ±0.6 dB typ. • can handle wide pulse width & (15µs typ.) with excellent rise/fall time (1.1 ns typ.) • delay time, 1.5 ns typ. • protected by US Patent, 6,943,629 Connectors BNC Applications • computers • digital communication • medical test set-ups MODEL NO. ZPUL-30P CASE STYLE: S32 Model Price Qty. ZPUL-30P $295.00 ea. (1-9) Pulse Amplifier Electrical Specifications FREQUENCY (MHz) GAIN (dB) RISE/FALL TIME (ns) PULSE WIDTH* (µs) MAXIMUM POWER (dBm) DYNAMIC RANGE VSWR (:1) Typ. DC POWER fL fU Min. Flatness Max. Max. Max. Output (1 dB Compr.) Input (no damage) NF** (dB) Typ. IP3 (dBm) Typ. In Out Volt (V) Nom. Current (mA) Max. 0.0025 700 29 ±1.0 1.5 6 +22*** +10 7.2 +34 2.0 2.0 24 400 * Pulse width for less than 10% droop. ** Noise Figure tested above 10 MHz. Open load is not recommended, potentially can cause damage. With no load derate max input power by 20 dB *** For 500-700 MHz, +20.5 dBm Maximum Ratings Operating Temperature Storage Temperature typical amplifier response to a pulse input -20°C to 65°C -55°C to 100°C DC Voltage +24.5V Max. Permanent damage may occur if any of these limits are exceeded. Outline Drawing Outline Dimensions ( inch mm ) A B C 3.75 2.00 1.80 95.25 50.80 45.72 D E .19 3.375 4.83 85.73 F G .19 1.625 4.83 41.28 H J K L M .144 .50 .40 .50 1.30 3.66 12.70 10.16 12.70 33.02 N .10 2.54 P Q .38 3.00 9.65 76.20 R S T wt .30 2.60 .80 grams 7.62 66.04 20.32 220.0 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. OR M98211 ZPUL-30P 131009 Page 1 of 2 ZPUL-30P Typical Performance Data/Curves FREQUENCY (MHz) GAIN (dB) DIRECTIVITY (dB) 24V 24V VSWR (:1) IN 24V 1.3924.26 10.00 7.41 1.1724.67 97.00 7.16 1.1524.83126.00 7.16 1.1425.30155.00 7.15 1.1425.61213.00 7.17 10.1732.9843.08 50.0033.4541.90 98.8833.4836.43 167.8833.3537.37 248.3833.2843.92 1.29 1.30 1.31 1.31 1.32 1.1425.51271.00 7.20 1.1525.36329.00 7.23 1.1524.94416.00 7.24 1.2124.42503.00 7.23 1.1224.38561.00 7.21 366.2533.1338.72 501.3832.9137.33 604.7932.8144.85 763.0033.0133.38 1001.6330.6834.50 1.32 1.1424.06619.00 7.20 1.29 1.0423.98706.00 7.16 1.25 1.1623.89793.00 7.20 1.11 1.5723.46909.00 7.29 1.3511.3820.75996.00 7.24 32 31 30 804 1005 50 45 40 35 30 25 20 15 10 5 0 ZPUL-30P OUTPUT POWER AT 1-dB COMPRESSION 8.0 NOISE FIGURE (dB) OUTPUT POWER (dBm) 28 26 24 22 IN 11 OUT 9 7 5 3 1 0 0 30 13 VSWR DIRECTIVITY(dB) 33 402 603 FREQUENCY (MHz) ZPUL-30P VSWR ZPUL-30P DIRECTIVITY 34 GAIN (dB) 24V 1.53 1.32 1.30 1.31 1.30 ZPUL-30P GAIN 201 OUT NOISE FIGURE (dB) 0.002532.1631.30 0.0132.6024.83 0.0532.4930.45 0.1232.4732.68 1.1132.5138.52 35 0 POUT at FREQUENCY 1 dB COMPR. (MHz) (dBm) 201 402 603 FREQUENCY (MHz) 804 1005 800 1000 201 402 603 804 1005 FREQUENCY (MHz) ZPUL-30P NOISE FIGURE at 24V 7.8 7.6 7.4 7.2 7.0 20 0 201 402 603 FREQUENCY (MHz) 804 1005 0 200 400 600 FREQUENCY (MHz) Notes Page 2 of 2 A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2