High IP3 HJK-3H+ HJK-3H Frequency Mixer Level 16 (LO Power +16 dBm) 140 to 180 MHz Maximum Ratings Operating Temperature Features -40°C to 85°C Storage Temperature -55°C to 100°C LO & RF Power CASE STYLE: TTT881 • high IP3, 37 dBm typ. • compression, 3 dB higher than LO power • protected by US Patent 6,807,407 19 dBm Permanent damage may occur if any of these limits are exceeded. +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications • base stations • communication systems •cellular •PCS Pin Connections LO2 RF1 IF3 GROUND 4,5,6 Outline Drawing Electrical Specifications FREQUENCY (MHz) PCB Land Pattern CONVERSION LOSS (dB) RF in IP3 at 1dB (dBm) Compr (dBm) RF LO IF Typ. σ Max. Typ. Typ. 140-180 160 0.5-20 8.0 0.1 9.2 +19 37 LO-RF ISOLATION (dB) LO-IF ISOLATION (dB) Typ. Min. Typ. Min. 44 35 44 30 Typical Performance Data Suggested Layout, Tolerance to be within ±.002 A B .38 .50 9.65 12.70 L .070 1.78 Outline Dimensions ( inch mm ) C .23 5.84 D .020 0.51 E .075 1.91 F G .250 .425 6.35 10.80 M N .270 .540 6.86 13.72 P .060 1.52 Q R .095 .445 2.41 11.30 H .187 4.75 J .050 1.27 S T .208 .415 5.28 10.54 Demo Board MCL P/N: TB-12 Suggested PCB Layout (PL-079) K .050 1.27 wt. grams 0.8 RF Freq. IF Freq. (RF1 for IP3) (MHz) (MHz) LO=160 MHz CONV. LOSS (dB) RF-2 for IP3 (MHz) IP3 (dBm) LO / RF Freq. (MHz) ISOLATION L-R (dB) L-I (dB) VSWR (:1) RF PORT LO (LO=160 MHz) PORT IF Freq. VSWR FOR VSWR (:1) (MHz) IF PORT 139.920.18.14140.9 34.114050.78 52.78 1.2715.53 0.31.10 144.915.18.16145.9 34.114550.70 48.361.279.330.41.09 149.910.18.17150.9 34.315051.06 44.921.286.130.51.10 154.9 5.18.17155.9 34.215552.09 42.081.274.160.81.13 156.9 3.18.17157.9 34.516054.10 39.911.283.201.11.14 157.9 2.18.19158.0 34.416555.81 38.411.273.093.11.16 158.9 1.18.21159.0 34.717054.88 37.591.273.625.11.15 159.5 0.58.24159.6 34.217552.76 37.231.284.578.11.15 160.5 0.58.26160.6 34.618051.28 37.20 1.28 5.7410.11.15 161.1 1.18.22161.2 34.6 15.11.16 162.1 2.18.19162.2 34.3 20.11.16 163.1 3.1 8.19 164.1 34.0 165.1 5.1 8.18 166.1 34.2 170.1 10.1 8.19 171.1 34.2 175.1 15.1 8.23 176.1 34.1 180.1 20.1 8.25 181.1 34.4 Electrical Schematic LO IF RF Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. G M151107 EDR-5182/1 RVN/TD/AM 150729 Page 1 of 2 HJK-3H+ HJK-3H Performance Charts HJK-3H L-R & L-I ISOLATION HJK-3H CONVERSION LOSS 60 LO = 160 MHz, +16 dBm LO<RF 8.35 55 LO>RF ISOLATION (dB) CONVERSION LOSS (dB) 8.40 8.30 8.25 8.20 50 45 40 35 8.15 30 140 8.10 0 2 4 6 8 10 12 14 16 18 20 L-R 145 150 155 L-I 160 165 170 175 180 LO FREQUENCY (MHz) IF FREQUENCY (MHz) HJK-3H IF VSWR HJK-3H VSWR 10.0 1.4 1.3 RF 2.0 VSWR VSWR 5.0 LO 1.2 1.1 1.0 140 1.0 145 150 155 160 165 170 175 180 0 4 FREQUENCY (MHz) 8 12 16 20 IF FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 2 of 2