Wide Frequency Range RF Frequency Counter UFC-6000 1-6000 MHz The Big Deal • • USB HID device compatible with 32/64 bit operating systems • Wide Frequency Range • Uses internal or External reference • Supplied with proprietary GUI software and API objects for programmers. Case Style: LJ1577 Installation CD with Software included Product Overview Mini-Circuits’ UFC-6000 is a small, light weight Frequency Counter operating over the frequency range 1 to 6000 MHz. The counter is cased in a rugged shielded case (size of 6.16” X 3.68” X 1.38”) with a 16x2 character LCD display, a reference input BNC(F) port and a signal input SMA(F) port. Using the USB interface allows remote display of measured frequencies, and eliminates the need for an additional power supply. The counter can also operate independently using an external power supply. The UFC-6000 is supplied along with a software CD containing a graphical user interface program and programming APIs for 32 and 64 bit environments. Also included are a 2.7ft. USB cable and a power adaptor with a USB A female connector, suitable for US, EU, and other power systems - see page 4 for details. Longer USB cables and a mounting bracket are available as additional options. Key Features Feature Advantages USB HID (Human Interface Device) Plug-and-Play (no need to install a driver for the device). Wide frequency range The UFC-6000 can measure the frequency of a signal from 1 to 6000 MHz Operates with external or internal reference The UFC-6000 can operate either synchronized with an external 10 MHz reference signal or independently, using its internal reference depending on user preference. LCD display 16x2 character LCD display providing the frequency reading, and information on the frequency counter’s status. USB powered Power to the UFC-6000 is supplied through the USB connector from either the USB bus or the supplied power adaptor with USB connector. Software CD, USB cable and power adaptor included A CD containing programming instructions for Linux® and Windows®1 operating systems, a GUI monitoring and control program and API objects for programmers is included with the UFC-6000. Also included are a 2.7ft. USB cable, and a 5VDC AC/DC power adaptor suitable for US, EU and UK power systems with a USB type A female connector. 1Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Linux is a registered trademark of Linus Torvalds. Neither Mini-Circuits nor the Mini-Circuits UFC-6000 frequency counter are affiliated with or endorsed by the owners of the above referenced trademarks Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation. Mini-Circuits ® www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 5 Wide Frequency Range RF Frequency Counter 1 - 6000 MHz 1-6000 MHz Features • Small, light weight • Wide frequency Range • Uses external or internal reference • Can be operated remotely using a PC with USB interface or independently • 16X2 Character LCD display • Easy installation and operation • User friendly Windows® Graphical User Interface • Supports a wide range of programming environments (See application note AN-49-001 for details) • Mounting bracket (Optional) • Installation CD with Software included UFC-6000 Order P/N UFC-6000 FC-CD USB-CBL-AB-3+ USB-AC/DC-5 Applications Description Frequency Counter Software CD 2.7 ft. USB cable AC/DC 5VDC Adapter Price Qty. $495.00 ea. (1-4) 1 Included 1 Included 1 Included RoHS Compliant • Lab Test equipment • Automated Test capability See our web site for RoHS Compliance methodologies and qualifications Mini-Circuits Frequency Counter Program for USB Frequency Counter Mini-Circuits ® www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Rev. D M146353 EDR-9851/5MP UFC-6000 RAV 140507 Page 2 of 5 UFC-6000 RF Frequency Counter Electrical Specifications Parameter Test Conditions Frequency range Frequency Resolution 2 Frequency Accuracy (@1 sec measurement sample time) 2, 3 Min. Typ. Max. Units MHz - 1 − 6000 1 - 40 MHz − 1 − 40-190 MHz − 10 − 190-6000 MHz − 100 − 1 - 40 MHz − ±2 − 40-190 MHz − ±20 − 190-1400 MHz − ±200 − Hz Hz 1400 - 6000 MHz − ±800 − Using internal Reference − − ±1.0 ppm/year Sample time 4 − 0.1 1 3 Sec Input Impedance − − 50 − Ω 1 - 1500 MHz − 1.1 − 1500-6000 MHz − 1.3 − Frequency Aging Input VSWR 1 - 5 MHz -23 − +13 5 - 4500 MHz -28 − +13 4500 - 6000 MHz -15 − +13 Input Power :1 dBm Reference In Frequency − − 10 − Reference In Impedance − − 50 − Ω Reference In Power − -5 − +10 dBm Supplied through the USB port 4.75 5 5.25 VDC − − 275 350 mA Supply Voltage USB current draw MHz 2 The Frequency counter’s default mode is ‘Auto Range’ which automatically selects the correct frequency range. When the frequency range is known, the user can improve response time by manually selecting the frequency range by a software function through the GUI interface, or user programming. 3 Accuracy shown using external 10 MHz reference synchronized to test signal. Using Internal Reference adds 2 ppm of tested frequency to the accuracy values shown. 4 Software function set by user, default option 1 Sec. Connections Absolute Maximum Ratings Reference Input (BNC-Female) Signal Input (SMA-Female) USB Port Parameter Ratings Operating Temperature (USB B female) Storage Temperature 0ºC to +50ºC -20ºC to +60ºC Max. Supply Voltage (VUSB) 6 VDC Max safe input power (Reference input). +13dBm Max safe input power (Signal input). +16dBm DC voltage input (Signal input) -50VDC to 50VDC Permanent damage may occur if any of these limits are exceeded. Operating in the range between operating power limits and absolute maximum ratings for extended periods of time may result in reduced life and reliability. Minimum System Requirements (For remote operation) Parameter Requirements Interface USB HID Host operating system 32 Bit operating system: Windows 98®, Windows XP®, Windows Vista®, Windows 7® 64 Bit operating system: Windows Vista®, Windows 7® Linux® support: 32/64 Bit operating system Hardware Pentium ® II or better 5 5 Pentium® is a registered trademark of Intel Corporation Mini-Circuits ® www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 5 UFC-6000 RF Frequency Counter Outline Drawing (LJ1577) ® REF IN RF IN USB INTERFACE USB Interface Indicator ® REF IN RF IN USB INTERFACE USB Interface Indicator Outline Dimensions ( inch mm ) A B C D E F G H J K L WT. GRAMS 6.16 156.5 3.68 93.4 1.38 35.0 0.15 3.8 0.500 12.7 4.000 101.6 0.250 6.4 2.250 57.2 1.96 49.7 0.144 3.7 0.160 4.1 300 Mini-Circuits ® www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 5 UFC-6000 RF Frequency Counter Ordering Information Included Accessories Part No. Description USB-AC/DC-5+ AC/DC Power Adapter with US, EU, IL, UK, AUS, and China two pin power plugs 6. Operating temperature: 0°C to +45°C, UK Europe & IL US AC Input: 100-240V, 47-63 Hz, DC Output 5±”B” V , IMax=1A Australia & China FC-CD Software CD USB-CBL-AB-3+ 2.7 ft (0.8 m) USB Cable: USB type A(Male) to USB type B(Male) 6 Power plugs for other countries are also available, if you need a power plug for a country not listed in the table please contact [email protected] or check http://www.minicircuits.com/contact/offices.html for regional offices e-mail and phone numbers. Optional Accessories Description USB-AC/DC-5 (spare) AC/DC 5VDC Power Adapter with US, EU, IL, UK, AUS, and China power plugs USB-CBL-AB-3+ (spare) 2.7 ft (0.8 m) USB Cable: USB type A(Male) to USB type B(Male) USB-CBL-AB-7+ 2.7 ft (0.8 m) USB Cable: USB type A(Male) to USB type B(Male) USB-CBL-AB-11+ 2.7 ft (0.8 m) USB Cable: USB type A(Male) to USB type B(Male) BKT-300-01+ Mounting Bracket Calibration Description CALUFC-6000 Calibration Service Click Here Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 5 of 5