Product Overview PRELIMINARY FAST-PS Series Bipolar Multi-Interface Digital Voltageand Current-controlled Fast Power Supply 100W 200W 400W 600W The FAST-PS series is a new series of fast power supplies with dual interface for slow and fast control of the output current and/or voltage. Current and Voltage digital control loop for easiness of configuration on different loads. Stand-alone unit with local control, extended input range and internal self-cooling by air convection. Features The FAST-PS series is the new obtain the maximum flexibility and • 19” – 1U stand-alone crate generation of bipolar power supplies by easiness of configuration to any • Different current and voltage ratings CAEN ELS and it was designed in order connected load. • 10/100/1000 Ethernet interface to have state-of-the-art performances • 2x Fast SFP interface (10 kHz update) both in current- and voltage-control The FAST-PS can be controlled either in • Current or Voltage regulation modes. current- or voltage-control modes and • High analog bandwidth • Low noise • Configurable Digital control loop both control loops can be remotely The 10/100/1000 Ethernet connection configured. and the two SFP slots (which can be used as electrical or optical Low noise and high bandwidth are just communication channels) allow to two of the main features of these power • Extended input range (90-260VAC) control the power converter in two converters that are the ideal upgrade for • Local display and control different modes: the “slow” interface the SY2604 and SY3634 system modules. • Internal protections and auxiliary readbacks over the Ethernet (up to 1 kHz) is intended in cases where the power Internal protections – e.g. over-voltage, supply has to be controlled at lower over-current - are implemented as well as rates and/or to set and monitor general external interlocks are present. parameters of the unit. The “fast” Applications • Magnet Power Supply • Laboratory Equipment • Fast Current or Voltage control interface over the SFP allows to run The units can be also locally controlled via feedback loops and fast corrections by a display and a local interface in order to reaching a maximum update rate of 10 set or monitor the main parameters and kHz. status of the power supply. The control loop, as for most of CAEN Different output current, voltage and ELS power supplies, is digital in order to power ratings are commercially available. FAST-PS Series Technical Specifications Regulation Type Current- or Voltage- Control Output current range ±5A ± 10 A ± 20 A ± 30 A Output voltage range ± 20 V ± 40 V ± 80 V Maximum output power up to 600 W About CAEN ELS Current setting resolution 18 bit CAEN ELS is a leading company in the design Voltage setting resolution 18 bit of power supplies and state-of-the-art Output current readback 20 bit research world, having its main focus on Output voltage readback 20 bit dedicated solutions for the particle Output current ripple* 30 ppm / FS Output current stability 50 ppm / FS Output voltage stability 50 ppm / FS complete electronic systems for the Physics accelerator community. • Magnet Power Supply Systems • Beamline Electronic Instrumentation • Precision Current Transducers • MTCA.4 – MicroTCA for Physics Switching Frequency 100 kHz Closed Loop Bandwidth >10 kHz Max Current/Voltage update rate 10 kHz Accuracy 0.05% 2 Inputs: user-configurable "dry" contacts 1 Outputs: relay (2 magnetic contacts) External Interlocks/States CAEN ELS d.o.o. DC Link Under-Voltage MOSFETs Over-Temperature Over-Current Over-Voltage Earth Fault Current Regulation Fault Excessive Current Ripple Internal Interlocks Kraška ulica, 2 6210 – Sežana Slovenija Phone +386 (0)5 7313 585 Fax +386 (0)5 7313 587 Input Fuses Earth Fuse Over-Voltage Hardware protections [email protected] www.caenels.com DC Link Voltage Ground Leakage Current MOSFETs Temperature Shunt Temperature Auxiliary ADC Read-Backs Cooling On-Module Self-Regulated Fans Drivers EPICS / TANGO 1 x Ethernet 10/100/100 2 x SFP ports Connection Extra-Features Point-by-Point Current Waveform Loading User-definable interlock thresholds, active levels and timings Firmware Remote Updates Dimensions 19"– 1U – 365 mm (W x H x D) Input Voltage 90/260 V(AC) (47-63 Hz) Graphic Display and Encoder 6 LEDs Local Control / Monitor * measured on 1mH load Ordering Options FASTPS052001 FAST-PS 0520-100 FAST-PS 0520-100 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±5A@±20V (100W max) FASTPS054002 FAST-PS 0540-200 FAST-PS 0540-200 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±5A@±40V (200W max) FASTPS102002 FAST-PS 1020-200 FAST-PS 1020-200 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±10A@±20V (200W max) FASTPS058004 FAST-PS 0580-400 FAST-PS 0580-400 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±5A@±80V (400W max) FASTPS104004 FAST-PS 1040-400 FAST-PS 1040-400 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±10A@±40V (400W max) FASTPS202004 FAST-PS 2020-400 FAST-PS 2020-400 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±20A@±20V (400W max) FASTPS204006 FAST-PS 2040-600 FAST-PS 2040-600 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±20A@±40V (600W max) FASTPS302006 FAST-PS 3020-600 FAST-PS 3020-600 - Fast Corrector Current- and Voltage-Controlled Digital Power Supply ±30A@±20V (600W max) Copyright © CAEN ELS d.o.o. – 2015 All rights reserved. Information in this publication supersedes all earlier versions. Specifications subject to change without notice. Rev 1.1 – Printed in March 2015.