ROHM 2SC5511

2SC5511
Transistors
For Audio Amplifier output - TV Velosity
Modulation (160V, 1.5A)
2SC5511
zStructure
NPN Silicon Epitaxial Planar Transistor
zExternal dimensions (Unit : mm)
TO-220FN
4.5
φ3.2
2.8
8.0
1.2
1.3
14.0
5.0
15.0
zFeatures
1) Electrical characteristics of DC current gain hFE is flat.
2) High breakdown voltage. (BVCEO=160V(Min.), at IC=1mA)
3) High fT. (Typ. 150MHz, at VCE=10V, IE= −0.2A, f=100MHz)
4) Wide SOA.
12.0
10.0
0.8
(1)Base
2.54
(2)Collector
2.54
0.75
2.6
(1) (2) (3)
(3)Emitter
zApplications
Power amplifier
Velosity modulation
zComplements
zAbsolute maximum ratings (Ta=25°C)
zPackaging specifications and hFE
Symbol
Limits
Unit
Collector-base voltage
VCBO
160
V
Collector-emitter voltage
VCEO
160
V
Emitter-base voltage
Parameter
Collector current
Package
2SC5511
5
V
IC
1.5
A
Pulse
ICP
3
A
2
W(Ta=25°C)
20
W(Tc=25°C)
Junction temperature
Tj
150
°C
Storage temperature
Tstg
−55 to +150
°C
Code
hFE
VEBO
PC
NPN
2SC5511
Type
DC
Collector power dissipation
PNP
2SA2005
∗1
Basic ordering unit (pieces)
Taping
−
500
E
hFE values are classified as follows:
Item
hFE
E
100 to 200
∗1 t=100ms
zElectrical characteristics (Ta=25°C)
Parameter
Symbol
Min. Typ. Max. Unit
Collector-emitter breakdown voltage
BVCEO
160
−
−
V
Collector-base breakdown voltage
BVCBO
160
−
−
V
IC=50µA
Emitter-base breakdown voltage
BVEBO
5
−
−
V
IE=50µA
Collector cutoff current
ICBO
−
−
1.0
µA
VCB=160V
Emitter cutoff current
IEBO
−
−
1.0
µA
VEB=4V
Collector-emitter saturation voltage
VCE(sat)
−
−
1.0
V
IC/IB=1A/0.1A
Base-emitter saturation voltage
VBE(sat)
−
−
1.5
V
IC/IB=1A/0.1A
hFE
100
−
200
−
VCE=5V, IC=0.1A
fT
−
150
−
Cob
−
20
−
DC current gain
Transition frequency
Collector output capacitance
Conditions
IC=1mA
MHz VCE=10V, IE=−0.2A , f=100MHz
pF
VCB=10V , IE=0A , f=1MHz
1/1
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1