F-215 JW–13–04–T–S–550–150 FWJ–08–01–T–S FWJ–05–02–T–S–RA (3,96 mm) .156" FWJ, HFWJ, JW SERIES POWER HEADERS & BOARD STACKERS Mates with: FHP TYPE STRIP NO. OF PINS LEAD STYLE PLATING OPTION OTHER OPTION S SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?FWJ or www.samtec.com?HFWJ Insulator Material: FWJ = Black Glass Filled Polyester HFWJ = Natural Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +105°C RoHS Compliant: Yes Processing: FWJ = Standard Header HFWJ = High Temp Header PINS 1 2 3 4 ALL Note: Some lengths, styles and options are non-standard, non-returnable. Leave blank for Through-hole –RA E (6,35) .250 01 thru 24 (1,14) .045 SQ TYP C –01 –02 (3,18) .125 –04 –05 * NO. OF PINS B (4,45) .175 (3,96) .156 (12,07) .475 C (10,46) .412 (11,73) .462 (19,10) .752 –––––– D D E F –––––– –––––– –––––– (4,45) .175 (3,96) .156 (8,13) .320 (13,56) .534 (2,54) .100 (4,95) .195 –––––– –––––– –––––– *FWJ Only No. of Positions x (3,96) .156 JW A (11,43) .450 (12,70) .500 (20,55) .809 (3,81) .150 F (2,54) .100 (1,02) .040 B LEAD STYLE (3,96) .156 TYP = Right Angle (Style –02 & –04 only) Specify LEAD STYLE from chart below. A RECOGNITIONS Mates with: FHP = Matte Tin (0,51) .020 Lead–Free Solderable: FWJ = Wave only HFWJ = Yes SMT Lead Coplanarity: (0,20 mm) .008" max (02-16) (0,25 mm) .010" max (17-24) For complete scope of recognitions see www.samtec.com/quality –T FHP/HFWJ CURRENT RATING (PER CONTACT) 13.1 A 11.2 A 10.3 A 9.2 A 6.7 A 04 PLATING OPTION S STACK HEIGHT POST HEIGHT SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?JW Insulator Material: Natural Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn over 50µ" (1,27 µm) Ni RoHS Compliant: Yes –T Note: This Series is non-standard, non-returnable. = Matte Tin 02 thru 24 Lead–Free Solderable: Yes SMT Lead Coplanarity: (0,20 mm) .008" max (02-16) (0,25 mm) .010" max (17-24) For complete scope of recognitions see www.samtec.com/quality –“XXX” (3,96) .156 TYP POST HEIGHT (0,00) .000 MIN STACKER HEIGHT (27,43) 1.080 MAX WITH (0,00) .000 POST (6,35) .250 (3,18) MIN .125 (2,29) .090 STACKER HEIGHT (29,21) 1.15 MAX WITH (0,00) .000 POST (8,89) .350 MIN (1,14) .045 SQ WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. –P = Pick & Place Pad (3 Pos. min.) (6,98 mm) .275" min. post height (–VS only) OTHER OPTION Leave blank for Through-hole –VS Example: –250 = (6,35 mm) .250" Processing: RECOGNITIONS –“XXX” = Stacker Height (in inches) (0,13 mm) .005" increments –VS = Surface Mount Requires HFWJ (2 pins/row minimum) Style –05 not available. = Post Height (in inches) = Surface Mount (2 pins/row minimum) –P = Pick & Place Pad (3 Pos. min.) (6,98 mm) .275" min. post height (–VS only)