F-215 TW–08–09–F–T–165–100 TW–16–06–T–D–500–100 TM TW–20–03–L–Q–400–085 (2,00 mm) .0787" TW SERIES THROUGH-HOLE BOARD STACKERS SPECIFICATIONS For complete specifications see www.samtec.com?TW-TH Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating: 5.2 A per pin (1 pin powered per row) Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold RoHS Compliant: Yes Lead–Free Solderable: Yes Mates with: CLT, SQT, SQW, ESQT, TLE, SMM, MMS, TCSD OTHER SOLUTIONS Paste In Hole (PIH) processing. Contact Samtec ASP Group. Choice of one through six rows ALSO AVAILABLE (MOQ Required) • Other platings Contact Samtec. RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality FILE NO: 090871_0_000 Specify stacker height in (0,13 mm) .005" increments LEAD STYLE NO. PINS PER ROW TW Note: For added mechanical stability, Samtec recommends mechanical board spacers be used in applications with gold or selective gold plated connectors. Contact [email protected] for more information. (2,00 mm) .0787 pitch PLATING OPTION –F Specify LEAD STYLE from chart below. 02 thru 50 Note: This Series is non-standard, non-returnable. = Gold flash on post, Matte Tin on tail –L 2 mm Shunt See previous page. No. of rows x (2,00) .0787 Low Profile –T, –5, –6 Right Angle Shrouded Double Row See ZLTMM Series. = Double Row –T –5 = Five Row * = Six Row (0,51) .020 SQ POST STACKER (1,27) HEIGHT See OAL .050 MIN Chart TAIL (2,00) .0787 (0,00) .000 MIN –S, –D*, –Q –T, –5, –6 –“XXX” –“XXX” LEAD STYLE = Four Row –6 295 TAIL SPEC = Tail Length in inches (0,13 mm) .005" increments Example: -150 Example: –250 = (3,81 mm) = (6,35 mm) .150" .250" 01 –S, –D*, –Q See TMM Series. See TMM Series. = Stacker Height in inches (0,13 mm) .005" increments –Q 04 (2,00) .0787 TYP –“XXX” = Matte Tin 300 Surface Mount –S = Single Row = Triple Row –T See 2SN Series. STACKER HEIGHT –D = 10µ" (0,25 µm) Gold on post, Matte Tin on tail Other Solutions ROW OPTION * –01 –02 –03 –04 –05 –06 –07 –08 –09 –10 –11 –12 OAL (8,20) .323 (9,60) .377 = Polarized Position (Specify position to be removed) (13,60) .535 (14,10) .555 (15,10) .594 (17,10) .673 (19,10) .751 (21,10) .830 (11,60) .456 (15,60) .614 (10,08) .397 (28,19) 1.110 * Style –08 & –12 = S & D only ROW OPTION STACKER HEIGHT –S, –D*, & –Q –T, –5, –6 (3,05) .120 MIN (4,06) .160 MIN * –D with stacker height greater than (4,06 mm) .160" will not have standoffs. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice.