EMA5 / UMA5N / FMA5A Transistors Emitter common (dual digital transistors) EMA5 / UMA5N / FMA5A zExternal dimensions (Unit : mm) zFeatures 1) Two DTA123Js in a EMT or UMT or SMT package. (2) (3) (2) (5) R1 DTr1 R2 Each lead has same dimensions ROHM : EMT5 (1) zPackaging, marking, and packaging specifications (1) (5) (2) 0.2 (4) UMA5N 1.3 (5) (4) R2 2.0 R1 DTr2 0.9 (4) R1 (3) R2 R2 FMA5A (1) 0.65 0.65 R1 (2) 0.7 (3) (1) 1.2 1.6 0.5 0.13 (5) EMA5 / UMA5N (3) (4) 0.22 zEquivalent circuit 0.5 0.5 1.0 1.6 EMA5 1.25 UMA5N FMA5A Package EMT5 A5 UMT5 A5 SMT5 A5 T2R TR T148 8000 3000 3000 Each lead has same dimensions ROHM : UMT5 EIAJ : SC-88A EMA5 / UMA5N FMA5A Junction temperature Storage temperature mA 150 (TOTAL) Pd Tj 300 (TOTAL) 150 Tstg −55 to +150 ∗ Do not exceed 120m per element for the UMA5N. 1.6 2.8 mW ∗ 0.3to0.6 ROHM : SMT5 EIAJ : SC-74A ˚C ˚C 0.8 IO Output current Power dissipation V 5 −100 2.9 −50 −12 V VIN 0.95 0.95 1.9 VCC Input voltage (4) Supply voltag (5) Unit (1) Limits 0.3 Symbol 0.15 Parameter (3) FMA5A zAbsolute maximum ratings (Ta=25°C) 0to0.1 Code Basic ordering unit (pieces) 0.1Min. (2) Marking 0to0.1 EMA5 0.15 2.1 Type Each lead has same dimensions Do not exceed 200mW per element for the FMA5A. zElectrical characteristics (Ta=25°C) Symbol Min. Typ. Max. Unit Input voltage Parameter VI (off) VI (on) − −1.1 − − −0.5 − V VCC= −5V, IO= −100µA VO= −0.3V, IO= −5mA Output voltage VO (on) − −0.1 −0.3 V IO/II= −5mA/ −0.25mA II − − −3.6 mA IO (off) − − −0.5 µA DC current gain GI 80 − − − Input resistance R1 Transition frequency Resistance ratio fT 1.54 − 2.2 250 2.86 − kΩ MHz R2 / R 1 17 21 26 − Input current Output current ∗Transition frequency of the device. Conditions VI= −5V VCC= −50V, VI=0V VO= −5V, IO= −10mA − VCE= −10V, IE=5mA, f=100MHz − Rev.A ∗ 1/2 EMA5 / UMA5N / FMA5A Transistors zElectrical characteristics curves OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) −20 −10 −5 −2 Ta=−40°C 25°C 100°C −1 −500m −200m −100m −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m −100m OUTPUT CURRENT : IO (A) Fig.1 Input voltage vs. output current (ON characteristics) −1 1k VCC=−5V −2m −1m −500µ Ta=100°C 25°C −40°C −200µ −100µ −50µ −20µ −10µ −5µ −2µ −1µ 0 VO=−5V 500 200 Ta=100°C 25°C −40°C 100 50 20 10 5 2 −0.5 −1.0 −1.5 −2.0 −2.5 −3.0 INPUT VOLTAGE : VI(off) (V) Fig.2 Output current vs. input voltage (OFF characteristics) 1 −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m −100m OUTPUT CURRENT : IO (A) Fig.3 DC current gain vs. output current lO/lI=20 −500m OUTPUT VOLTAGE : VO(on) (V) −10m −5m VO=−0.3V −50 DC CURRENT GAIN : GI −100 Ta=100°C 25°C −40°C −200m −100m −50m −20m −10m −5m −2m −1m −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m −100m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1