EMH6 / UMH6N / IMH6A Transistors General purpose (dual digital transistors) EMH6 / UMH6N / IMH6A zExternal dimensions (Units : mm) zFeatures 1) Two DTC144E chips in a EMT or UMT or SMT package. 0.22 (5) (6) IMH6A (1) (4) R1 (5) (6) R1 ROHM : EMT6 R2 R2 1.3 0.65 (6) 1.25 zPackage, marking, and packaging specifications 2.0 (3) UMH6N (1) 0.2 (3) (2) 0.65 R1 (6) (2) R1 (4) (5) Each lead has same dimensions R2 (1) R2 (4) (2) (5) (3) (1) 0.5 EMH6 / UMH6N (2) 1.2 1.6 0.13 zEquivalent circuit (3) (4) 0.5 0.5 1.0 1.6 EMH6 Package EMT6 UMT6 SMT6 Marking H6 H6 H6 Code T2R TR T108 Basic ordering unit (pieces) 8000 3000 3000 0.1Min. ROHM : UMT6 EIAJ : SC-88 0.9 IMH6A 0.7 UMH6N 0to0.1 EMH6 0.15 2.1 Type Each lead has same dimensions (4) EMH6 / UMH6N IMH6A Pd 30 150(TOTAL) 300(TOTAL) (1) 2.8 mA mW Junction temperature Tj 150 °C Storage temperature Tstg −55~+150 °C ∗1 ∗2 0.3to0.6 Each lead has same dimensions ROHM : SMT6 EIAJ : SC-74 ∗1 120mW per element must not be exceeded. ∗2 200mW per element must not be exceeded. 1.1 IO 0.8 Output current 1.6 V −10 0to0.1 VIN 0.95 0.95 1.9 2.9 (5) V 40 (2) Unit 50 (3) Limits VCC Input voltage Power dissipation 0.3 Symbol 0.15 Parameter Supply voltage (6) IMH6A zAbsolute maximum ratings (Ta = 25°C) zElectrical characteristics (Ta = 25°C) Parameter Symbol Min. Typ. Max. VI (off) − − 0.5 VI (on) 3 − − V Output voltage Input current VO (on) II − − 0.1 − 0.3 0.18 V mA IO/II=10mA/0.5mA VI=5V Output current VCC=50V, VI=0V Input voltage Unit IO (off) − − 0.5 µA DC current gain GI 68 − − − Input resistance R1 32.9 47 61.1 kΩ Resistance ratio R2 / R1 0.8 1 1.2 − fT − 250 − MHz Transition frequency ∗Transition frequency of the device. Conditions VCC=5V, IO=100µA VO=0.3V, IO=2mA IO/VO=5mA/5V − − VCE=10V, IE=−5mA, f=100MHz ∗ Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0