F-215 TMM–116–02–F–S TMM–108–01–T–D TMM–108–03–F–Q TM TMM–112–01–L–D–RA (2,00 mm) .0787" TMM SERIES LOW PROFILE THROUGH-HOLE HEADER SPECIFICATIONS For complete specifications see www.samtec.com?TMM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating (SMM/TMM): 3.2 A per row (1 pin powered per row) Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold Voltage Rating: 500 VAC mated with SQW 450 VAC mated with SQT RoHS Compliant: Yes Lead–Free Solderable: Yes RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality Single, double and quad row Mates with: CLT, SQT, SQW, ESQT, TLE, SMM, MMS, TCSD Ultra-low profile (1,50 mm) .059" APPLICATION Choice of five lead styles APPLICATIONS SQT TMM Retention Clip Option (–RC) Note: Some lengths, styles and options are non-standard, non-returnable. TMM 1 (2,00 mm) .0787" pitch (2,00 mm) .0787" NO. PINS PER ROW HORIZONTAL LEAD STYLE PLATING OPTION Specify LEAD STYLE from chart below. = Gold flash on post, Matte Tin on tail ROW OPTION OTHER OPTION –S –RA & –RE FILE NO: 090871_0_000 ALSO AVAILABLE (MOQ Required) 01 thru 50 • Other platings Contact Samtec. Other Solutions (1,97) .078 No. of positions x (2,00) .0787 LEAD STYLE Press Fit 50 01 –02 02 100 – 03 Elevated (3,94) .155 See TW Series. High Density Shrouded Four Row Vertical & Right Angle 99 – 05 04 200 – 06 (6,00) .236 .323 .146 .118 (4,00) (2,70) .158 .106 (5,69) (1,91) .224 .075 (2,29) (5,43) (1,65) .090 .214 .065 (9,58) (3,20) (4,88) .377 .126 .192 = Double Row –Q = 10µ" (0,25 µm) Gold on post, Matte Tin on tail = Four Row –RC –S = Retention Clip (Mates with TCSD) (Double row only, 4 positions minimum, only available –06 lead style) = 30µ" (0,76 µm) Gold on post, Matte Tin on tail –T = Matte Tin (3,05) .120 (3,20) .126 (2,00) .0787 –“XXX” (8,00) .315 01 –RC 197 (0,50) .020 SQ (1,50) .059 (2,00).0787 –Q –RA (3,05) .120 (2,00) .0787 D C –S = Polarized Position (Specify position of omitted pin) (3,05) .120 (3,20) .126 B A (2,00) .0787 = Right Angle (Lead Style –01 only) (2 positions minimum, –Q row) –D (1,27) .050 See TMMS Series. Paste In Hole (PIH) processing. Contact Samtec ASP Group for part customization. C (8,20) (3,70) (3,00) – 04 01 B = Single Row –L (3,20) (3,50) .126 .138 – 01 See PTT Series. See TMMH Series. A –F –D –Q –RA & –RE WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (2,00) .0787 OPTION D – RA (1,27) .050 (3,56) .140 –RE