F-215 (Rev 10JUN15) ZSTMM–112–75–L–D–285 STMM–110–02–F–D–RA STMM–113–02–T–D (2.00 mm) .0787" STMM, ZSTMM SERIES SHROUDED IDC HEADER & STACKER Mates with: TCSD (except –SR) NO. PINS PER ROW 1 STMM PLATING OPTION 02 TAIL OPTION D OTHER OPTION SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?STMM or www.samtec.com?ZSTMM Insulator Material: High Temperature Nylon Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1.27 µm) Ni Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold RoHS Compliant: Yes –“XX” 04, 05, 06, 07, 08, 10, 12, 13, 14, 15, 17, 20, 22, 25 RECOGNITIONS OTHER SOLUTIONS • Shrouded board-to-board headers and stackers to mate with SQT, SQW, ESQ and SMM Series. See LTMM and ZLTMM Series. = Surface Mount –K (6.00) .237 (2.00) .0787 01 03 (2.00) .0787 (3.55) .140 (2.97) .117 (1.27) .050 (0.38) .015 (0.51) .020 SQ –SM 1 ZSTMM PLATING OPTION Specify LEAD STYLE from chart. –F –T = Matte Tin (6.00) .237 (2.00) .0787 (4.80) .190 BODY HEIGHT OTHER OPTION –“XXX” –“XX” = Body Height = Polarized Position –L = 10µ" (0.25 µm) Gold on post, Matte Tin on tail 02 04 (3.18) .125 (0.38) .015 (0.51) .020 SQ D = Gold flash on post, Matte Tin on tail (2.00) .0787 x No. of positions + (6.17) .243 (3.55) .140 –TR –RA LEAD STYLE (Standard sizes) 01 03 = (7.50 mm) .295" DIA Film Pick & Place Pad (-SM only) = Tape & Reel (–SM only) –SM NO. PINS PER ROW (1.52) .060 (2.00) .0787 (7.79) .307 –RA 04, 05, 06, 07, 08, 10, 12, 13, 14, 15, 17, 20, 22, 25 (0.51) .020 (2.29) .090 (0.38) .015 (0.89) .035 (4.80) .190 T/H (2.00) .0787 Note: For added mechanical stability, Samtec recommends mechanical board spacers be used in applications with gold or selective gold plated connectors. Contact [email protected] for more information. –SM –T = Matte Tin (MOQ Required) • Other sizes • Other platings Contact Samtec. = Locking Clip (-SM only) (Manual placement required) = Right Angle = 10µ" (0.25 µm) Gold on post, Matte Tin on tail 02 04 For complete scope of recognitions see www.samtec.com/quality ALSO AVAILABLE –LC –RA –L (2.00) .0787 x No. of positions + (6.17) .243 (0.51) .020 = Polarized Position Leave blank for Through-hole = Gold flash on post, Matte Tin on tail (Standard sizes) Processing: Lead–Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max –F (3.05) .120 BODY HEIGHT (6.35) B .250 (OAL) MIN (2.29) .090 MIN Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. LEAD STYLE –75 –62 –65 –73 –63 –66 –69 –74 –70 –71 –72 B (OAL) MAX BODY HEIGHT (9.58) 0.377 (7.42) 0.292 (10,08) 0.397 (7,92) 0.312 (10.49) 0.413 (8.33) 0.328 (12.09) 0.476 (9.93) 0.391 (14.10) 0.555 (11.94) 0.470 (15.09) 0.594 (12.93) 0.509 (15.60) 0.614 (13.44) 0.529 (17.09) 0.673 (14.94) 0.588 (17.60) 0.693 (15.44) 0.608 (21.08) 0.830 (18.92) 0.745 (21.62) 0.851 (19.46) 0.766