MACHINED TERMINALS & SOCKETS

F-215 SUPPLEMENT
SC–8P1–GT
SC–1P4–GG
SC, T SERIES
MACHINED TERMINALS & SOCKETS
SPECIFICATIONS
SC–1P1–, SC–6P1–
SC–8P1
SC
Contact:
BeCu
Shell:
Brass
-GG Plating:
30µ" (0,76 µm) Au over
50µ" (1,27 µm) Ni on contact;
10µ" (0,25 µm) Au over
50µ" (1,27 µm) Ni on shell
-GT Plating:
30µ" (0,76 µm) Au over
50µ" (1,27 µm) Ni on contact;
Sn over 50µ" (1,27 µm) Ni
on shell
-TT Plating:
Sn over 50µ" (1,27 µm)
Ni on contact; Sn over 50µ"
(1,27 µm) Ni on shell
-ST Plating:
10µ" (0,25 µm) Au over
50µ" (1,27 µm) Ni on contact;
Sn over 50µ" (1,27µm)
Ni on shell
Contact Resistance:
10 mΩ
Insertion Force (SC):
9 oz (2,50 N) avg,
16 oz (4,45 N) max
Withdrawal Force (SC):
2.5 oz (0,70 N) avg,
1.5 oz (0,42 N) min
Lead DIA Accepted:
.015" to .022"
(0,38 mm to 0,56 mm) and
most IC leads
(0,76)
.030
(1,83)
.072
DIA
Part No.
SC–1P1–
SC–6P1–
X
X
(1,52)
.061
DIA
Z
DIA
DIA ±.015
0,51) (3,18) (7,62)
.020 .125 .300
(0,51) (4,57) (8,89)
.020 .180 .350
(1,83)
.072
DIA
(4,19)
.165
(0,71)
.028
(1,32)
.052
DIA
(2,11)
(0,25)
.083
.010
(1,32)
.052
DIA
(0,74)
.029 DIA
Z
Y
X
DIA
Insertion Depth (SC-1P1, SC-6P1) = .95" to .145" (2,41 mm to 3,68 mm)
Plating Available (SC-1P1) = GG, GT, TT, ST
Plating Available (SC-6P1) = GG, GT
Insertion Depth = .085" to .140" (2,16 mm to 3,56 mm)
Lead DIA Accepted: .016" to .020" (0,41 mm to 0,51 mm)
Plating Available = GG, GT, TT
SC–1P4–
T–1S6–
SPECIFICATIONS
SC-1P4
Contact:
BeCu
Shell:
Brass
-GG Plating:
20µ" (0,51 µm) Au over 50µ"
(1,27 µm) Ni on contact
-GT Plating:
20µ" (0,51 µm) Au over 50µ"
(1,27 µm) Ni on contact
Contact Resistance:
RECOMMENDED
10 mΩ
PC HOLE SIZE:
Insertion Force:
6.5 oz (1,81 N) avg,
LEAD SIZE
HOLE SIZE
13 oz (3,62 N) max
(0,46) .018 DIA
(0,61) .024 DIA
(.032" (0,81 mm)
(0,51) .020 DIA
(0,66) .026 DIA
DIA probe)
(0,64) .025 DIA
(0,79) .031 DIA
Withdrawal Force:
(0,76) .030 DIA
(0,91) .036 DIA
3 oz (0,83 N) avg,
(0,89)
.035
DIA
(1,04) .041 DIA
2 oz (0,56 N) min
(1,14) .045 DIA
(1,30) .051 DIA
(.032" (0,81 mm)
(1,32) .052 DIA
(1,47) .058 DIA
DIA probe)
(0,46) .018 SQ
(0,64) .025 SQ
(1,14) .045 SQ
(0,76) .030 DIA
(1,02) .040 DIA
(1,75) .069 DIA
(0,20) .008 x (0,71) .028
(0,25) .010 x (0,51) .020
(0,41) .016 x (0,51) .020
(0,41) .016 x (0,61) .024
(0,41) .016 x (0,79) .031
Note:
Some sizes, styles and
options are non-standard,
non-returnable.
(2,28)
.090
DIA
(0,76)
.030
(0,64)
.025
SQ
(0,71)
.028
(2,18)
.086
DIA
(9,53)
.375
B
(1,98)
.078
DIA
(3,18)
.125
(0,76)
.030
DIA
(0,89) .035 DIA
(0,71) .028 DIA
(0,79) .031 DIA
(0,89) .035 DIA
(1,04) .041 DIA
PART NO.
B
T–1S6–07–X–2
(10,92) .430
T–1S6–08–X–2
(13,46) .530
T–1S6–09–X–2
(18,54) .730
T–1S6–10–X–2
(21,08) .830
T–1S6–11–X–2
(23,62) .930
T–1S6–12–X–2
(26,16) 1.030
T–1S6–13–X–2
(31,24) 1.230
T–1S6–14–X–2
(36,32) 1.430
T–1S6–15–X–2
(16,00) .630
T–1S6–16–X–2
(11,30) .445
T–1S6–17–X–2
(12,19) .480
T–1S6–18–X–2
(7,62) .300
T–1S6–19–X–2
(33,78) 1.330
T–1S6–20–X–2
(28,70) 1.130
T–1S6–21–X–2
(8,51) .335
Pins are supplied on a bandolier.
Material: Phosphor Bronze
X = Plating option (specify G or T)
Insertion Depth = .175" to .215" (4,45 mm to 5,46 mm)
Lead DIA Accepted = .032" to .038" (0,81 mm to 0,97 mm)
Plating Available = GG, GT
–G = 10µ" (0,25 µm) Gold on .165" (4,19 mm)
contact area. Gold flash on balance
–T = 200µ" (5,08 µm) Tin
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.