F-213 SUPPLEMENT SC–8P1–GG EZ–2P3–GT SC, EZ SERIES STANDARD, LOW PROFILE & SMT SOCKETS Specifications: SC, EZ Contact: BeCu Shell: Brass -GG Plating: 30µ" (0,76 µm) Au over 50µ" (1,27 µm) Ni on contact; 10µ" (0,25 µm) Au over 50µ" (1,27 µm) Ni on shell -GT Plating: 30µ" (0,76 µm) Au over 50µ" (1,27 µm) Ni on contact; Sn over 50µ" (1,27 µm) Ni on shell -TT Plating: Sn over 50µ" (1,27 µm) Ni on contact; Sn over 50µ" (1,27 µm) Ni on shell -ST Plating: 10µ" (0,25 µm) Au over 50µ" (1,27 µm) Ni on contact; Sn over 50µ" (1,27µm) Ni on shell Current Rating: 1A per contact Contact Resistance: 10 mΩ Insertion Force (SC): 9oz (2,50 N) avg, 16oz (4,45 N) max Withdrawal Force (SC): 2.5oz (0,70 N) avg, 1.5oz (0,42 N) min Insertion Force (EZ): 2.5oz (0,70 N) avg, 5.5oz (1,53N) max Withdrawal Force (EZ): 2.0oz (0,56 N) avg, 0.35oz (0,10 N) min Lead DIA Accepted: .015" to .022" (0,38 mm to 0,56 mm) and most IC leads RECOMMENDED PC HOLE SIZE: LEAD SIZE HOLE SIZE (0,46) .018 DIA (0,51) .020 DIA (0,64) .025 DIA (0,76) .030 DIA (0,89) .035 DIA (1,14) .045 DIA (1,32) .052 DIA (0,61) .024 DIA (0,66) .026 DIA (0,79) .031 DIA (0,91) .036 DIA (1,04) .041 DIA (1,30) .051 DIA (1,47) .058 DIA (0,46) .018 SQ (0,64) .025 SQ (1,14) .045 SQ (0,76) .030 DIA (1,02) .040 DIA (1,75) .069 DIA (0,20) .008 x (0,71) .028 (0,25) .010 x (0,51) .020 (0,41) .016 x (0,51) .020 (0,41) .016 x (0,61) .024 (0,41) .016 x (0,79) .031 (0,89) .035 DIA (0,71) .028 DIA (0,79) .031 DIA (0,89) .035 DIA (1,04) .041 DIA Note: Some sizes, styles and options are non-standard, non-returnable. SC–1P1–, SC–6P1–, EZ–1P1–, EZ–6P1– (0,76) .030 (1,83) .072 DIA Part No. SC–1P1– EZ–1P1– SC–6P1– EZ–6P1– X Y Z DIA ±.010 ±.015 (0,51) .020 (3,18) .125 (7,62) .300 (0,51) .020 (4,57) .180 (8,89) .350 EZ–2P3– (1,32) .052 DIA Z Y SC–1W1–, EZ–1W1– (0,76) .030 (1,83) .072 DIA (1,83) .072 DIA (1,52) .061 DIA (0,76) .030 (1,52) .061 DIA (0,71) .028 (1,32) .052 DIA (1,32) .052 DIA (0,89) .035 DIA (0,71) .028 X DIA Insertion Depth (SC-1P1, SC-6P1) = .95" to .145" (2,41 mm to 3,68 mm) Plating Available (SC-1P1) = GG, GT, TT, ST Plating Available (SC-6P1) = GG, GT (0,71) .028 (1,52) .061 DIA Z (13,77) .542 (8,86) .349 Y (4,32) .170 (0,64) .025 SQ (0,51) .020 DIA Insertion Depth = .125" to .170" (3,18 mm to 4,32 mm) Plating Available = GG, GT Part No. Y Z ±.010 ±.015 SC–1W1–XX–1 EZ–1W1–XX–1 SC–1W1–XX–2 EZ–1W1–XX–2 SC–1W1–XX–3 EZ–1W1–XX–3 (12,95) .510 (17,86) .703 (9,14) .360 (14,05) .553 (6,60) .260 (11,51) .453 Insertion Depth = .125" to .157" (3,18 mm to 3,99 mm) Plating Available = GG, GT, TT WWW.SAMTEC.COM F-213 SUPPLEMENT SC–8P1–GT SC–1P4–GG SC, EZ SERIES STANDARD, LOW PROFILE & SMT SOCKETS Specifications: SC-1P4 SC–5P1– Contact: BeCu Shell: Brass -GG Plating: 20µ" (0,51 µm) Au over 50µ" (1,27 µm) Ni on contact -GT Plating: 20µ" (0,51 µm) Au over 50µ" (1,27 µm) Ni on contact Current Rating: 5A per contact Contact Resistance: 10 mΩ Insertion Force: 6.5oz (1,81 N) avg, 13oz (3,62 N) max (.032" (0,81 mm) DIA probe) Withdrawal Force: 3oz (0,83 N) avg, 2oz (0,56 N) min (.032" (0,81 mm) DIA probe) SC–3P1 (1,83) .072 DIA (4,83) .190 (1,83) .072 DIA (2,41) (0,51) .095 .020 (1,32) .052 DIA (3,10) .122 (0,76) .030 (5,84) .230 (1,32) .052 DIA (0,76) .030 DIA (0,76) .030 DIA Insertion Depth = .080" to .150" (2,03 mm to 3,81 mm) Lead DIA Accepted: .016" to .020" (0,41 mm to 0,51 mm) Plating Available = GG, GT, TT SC–4P1–, EZ–4P1– Insertion Depth = .105" to .170" (2,67 mm to 4,32 mm) Lead DIA Accepted: .015" to .020" (0,38 mm to 0,51 mm) Plating Available = GG, GT, TT SC–1P4– (1,83) .072 DIA (3,35) .132 (0,51) .020 (6,10) .240 (1,32) .052 DIA (2,28) .090 DIA (0,76) .030 (0,51) .020 DIA Insertion Depth = .080" to .105" (2,03 mm to 2,67 mm) Lead DIA Accepted: .016" to .021" (0,41 mm to 0,53 mm) Plating Available = GG, GT, TT (0,71) .028 (9,53) .375 SC–8P1– (1,83) .072 DIA (4,19) .165 Note: Some sizes, styles and options are non-standard, non-returnable. (2,11) (0,25) .083 .010 (1,32) .052 DIA (2,18) .086 DIA (1,98) .078 DIA (3,18) .125 (0,76) .030 DIA (0,74) .029 DIA Insertion Depth = .085" to .140" (2,16 mm to 3,56 mm) Lead DIA Accepted: .016" to .020" (0,41 mm to 0,51 mm) Plating Available = GG, GT, TT WWW.SAMTEC.COM Insertion Depth = .175" to .215" (4,45 mm to 5,46 mm) Lead DIA Accepted = .032" to .038" (0,81 mm to 0,97 mm) Plating Available = GG, GT