BTMM–106–01–T–S F-213 SUPPLEMENT BTSW–110–01–T–D (2,00 mm) .0787" (2,54 mm) .100" BTSW–210–01–T–S BTMM–110–01–T–D BTMM, BTSW SERIES BTMM–150–01–T–D LOW PROFILE SQUARE POST JUMPER SPECIFICATIONS For complete specifications see www.samtec.com?BTMM BTMM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +105°C RoHS Compliant: Yes Lead–Free Solderable: Yes NO. PINS PER ROW 1 01 01 thru 50 ROW OPTION –T –S “XXX” = Single Row = Polarized Position (Specify position of omitted pin) = Matte Tin –D = Double Row No. of positions x (2,00) .0787 (Leave blank for no option) 02 (3,94) .155 (2,00) .0787 01 01 (2,60) .102 (2,00) .0787 (0,50) .020 SQ (2,57) .101 (1,50) .059 (1,50) .059 (4,00) .157 Note: Some sizes, styles and options are non-standard, non-returnable. SPECIFICATIONS For complete specifications see www.samtec.com?BTSW Insulator Material: Black Glass Filled Polyester Terminal Material: Phosphor Bronze Plating: Sn over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +105°C RoHS Compliant: Yes Lead–Free Solderable: Wave Only –S (8,00) .315 (4,00) .157 SINGLE ROW DOUBLE ROW PIN CENTERS BTSW NO. PINS PER ROW 01 –D PLATING OPTION ROW OPTION –T = Single Row OTHER OPTION –S –1 01 thru 50 = (2,54 mm) .100" (All positions filled) = (2,54 mm) .100" Pin Center –2 = (5,08 mm) .200" Pin Center = Matte Tin = (5,08 mm) .200" (Every other position filled starting at –01 and ending in last position) –LL = Locking Lead –D 02 thru 25 “XXX” = Double Row = Polarized Position (Specify position of omitted pin) 02 01 (5,08) .200 APPLICATION (2,54) .100 (Leave blank for no option) 01 (2,54) .100 (2,80) .110 (2,54) .100 (2,54) .100 (2,54) .100 –D (0,64) .025 SQ No. of Positions x (2,54) .100 (5,08) (10,16) .400 .200 Note: Some sizes, styles and options are non-standard, non-returnable. OTHER OPTION PLATING OPTION SINGLE ROW DOUBLE ROW WWW.SAMTEC.COM (5,08) .200 (2,69) .106 –S