RSA6.1J4 Diodes ESD Protection diode RSA 6.1J4 1.6 + − 0.1 E61 (5) (4) 0.5 0.5 1.0 + − 0.1 zConstruction Silicon epitaxial planar 0.5 + − 0.05 1.2 + − 0.1 1.6 + − 0.1 zFeatures 1) Ultra small mold type. (EMD5) 2) High reliability. 0.22 + − 0.05 (1) (2) 0~0.1 0.2 + − 0.1 (3) 0.2 + − 0.1 zExternal dimensions (Units : mm) zApplication ESD protection 0.13 + − 0.05 (Each lead has same dimensions) ROHM : EMD5 EMD5 zCircuit zAbsolute maximum ratings (Ta=25°C) Symbol Limits Unit Peak pulse power-1 (tp=10×1000µs) Ppk 10 W Peak pulse power-2 (tp=8×20µs) Parameter Ppk 80 W Junction temperature Tj 150 ˚C Storage temperature Tstg −55 to +150 ˚C zElectrical characteristics (Ta=25°C) ∗ Rating of per diode. Symbol Min. Typ. Max. Zener voltage VZ 6.10 − 7.20 V IZ=1mA Reverse current IR − − 1 µA VR=3.0V Forward voltage VF − − 1.0 V IF=100mA Junction capacitance Ct − 35 − pF VR=0V, f=1MHz Parameter Unit Conditions ∗ Zener voltage (Vz) shall be measured at 40ms after loading current. ∗ Please pay attention to static electricity when handling. 1/2 RSA6.1J4 Diodes zOthers IEC-1000-4-2 Parameter Equipment composition Charge discharge capacitance Discharge resistance : 150pF : 330Ω Criterion Repeat by 10 times No erroneous operation Contact In air : ±9kV : ±16kV 100n 1 REVERSE CURRENT : IR (A) ZENER CURRENT : Iz (A) 100n 10n 1n 100µ 10µ 1µ 100n 5 5.5 6 6.5 7 7.5 8 10n 1n 100p 10p 1p 0 1 2 3 4 5 REVERSE VOLTAGE : VR (V) ZENER VOLTAGE : Vz (V) Fig.1 Zener voltage characteristics Fig.2 Reverse characteristics 6 CAPACITANCE BETWEEN TERMINALS : Ct (pF) zElectrical characteristic curves (Ta=25°C) 100 10 0 0 1 2 3 4 5 6 REVERSE VOLTAGE : VR (V) Fig.3 Capacitance between terminals characteristics REVERSE SURGE POWER DISSIPATION : PRSM (W) 100 10 1 0.01 0.1 1 10 PULSE WIDTH : Tw (ms) Fig.4 Surge power dissipation 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0