High Speed Characterization Report Series: FTSH/CLP Low Profile Socket and Terminal Strip Description: Parallel Board-to-Board, 0.050” [1.27mm] Pitch, 5.13mm (0.202”) Stack Height Time Domain Data Summary Table 3 - Single-Ended Impedance (Ω) Signal Risetime Maximum Impedance Minimum Impedance 30±5ps 50 ps 100 ps 250 ps 500 ps 750 ps 1 ns 57.1 51.3 51.1 50.4 50.3 50.1 50.0 35.3 39.8 42.0 45.0 47.0 48.0 48.6 S i ng l e - E nd e d A p p l i c at i o n I mp ed a nc e vs . R i s et i me 75 70 65 60 55 maximum 50 minimum 45 40 35 30 25 35 50 100 250 500 750 1000 Ri seti me (pSec) Table 4 - Differential Impedance (Ω) Signal Risetime Maximum Impedance Minimum Impedance 30±5ps 50 ps 100 ps 250 ps 500 ps 750 ps 1 ns 101.3 100.7 100.7 100.6 100.6 100.5 100.4 63.6 71.3 76.0 82.8 89.3 92.3 94.1 D i f f er e nt i al A p p l i c at i o n I mp ed a nc e vs . R i s et i me 130 120 110 100 maximum 90 minimum 80 70 60 50 35 50 10 0 250 50 0 750 100 0 Riset ime (pSec) Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:3 Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 9/29/2005 All Rights Reserved High Speed Characterization Report Series: FTSH/CLP Low Profile Socket and Terminal Strip Description: Parallel Board-to-Board, 0.050” [1.27mm] Pitch, 5.13mm (0.202”) Stack Height Table 5 - Single-Ended Crosstalk (%) Input (tr) 30±5ps 50 ps 100 ps 250 ps 500 ps 750 ps 1 ns NEXT GAQG GAGQG Xrowse 13.9 4.9 8.9 12.2 2.5 7.0 9.5 1.6 5.4 4.6 < 1.0 2.5 2.5 < 1.0 1.3 1.7 < 1.0 < 1.0 1.3 < 1.0 < 1.0 FEXT GAQG GAGQG Xrowse 8.2 3.5 7.0 6.0 2.3 4.5 3.7 1.5 2.6 1.3 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 Table 6 - Differential Crosstalk (%) Input (tr) 30±5ps 50 ps 100 ps 250 ps 500 ps 750 ps 1 ns NEXT GAAQQSS GAAGQQG Xrowdiff 4.6 < 1.0 4.4 3.9 < 1.0 3.7 2.9 < 1.0 2.6 1.4 < 1.0 1.1 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 FEXT GAAQQSS GAAGQQG Xrowdiff 2.0 < 1.0 1.9 1.1 < 1.0 1.3 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 Table 7 - Propagation Delay (Mated Connector) Single-Ended Differential Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 78ps 72ps WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:4 Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 9/29/2005 All Rights Reserved