High Speed Characterization Report Series: QFS-RA/QMS (-06.75 lead style) Description: Q2™ High-Speed Rugged Ground Plane Terminal/Socket Strip, 0.635mm Pitch, Right Angle to Vertical Board-to-Board Time Domain Data Summary Table 3 - Single-Ended Impedance () Case 1 = Short Row; Case 2 = Long Row Case 1 2 Signal Rise-time Maximum Impedance Minimum Impedance Maximum Impedance Minimum Impedance 30ps 50ps 100ps 250ps 500ps 53.4 51.6 51.0 50.6 50.5 36.4 38.2 41.0 43.7 45.6 55.9 54.1 50.9 50.7 50.5 37.0 37.2 39.2 43.5 45.7 Single-Ended Impedance - Case 1, Short Row Single-Ended Impedance - Case 2, Long Row Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:5 Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 5/1/2013 All Rights Reserved High Speed Characterization Report Series: QFS-RA/QMS (-06.75 lead style) Description: Q2™ High-Speed Rugged Ground Plane Terminal/Socket Strip, 0.635mm Pitch, Right Angle to Vertical Board-to-Board Table 4 - Differential Impedance () Case 1 = Short Row; Case 2 = Long Row Case 1 2 Signal Rise-time Maximum Impedance Minimum Impedance Maximum Impedance Minimum Impedance 30ps 50ps 100ps 250ps 500ps 100.4 100.3 100.3 100.3 100.2 52.2 57.5 65.9 74.9 83.5 102.5 101.7 100.7 100.5 100.5 54.3 55.0 60.5 72.3 82.7 Differential Impedance - Case 1, Short Row Differential Impedance - Case 2, Long Row Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:6 Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 5/1/2013 All Rights Reserved High Speed Characterization Report Series: QFS-RA/QMS (-06.75 lead style) Description: Q2™ High-Speed Rugged Ground Plane Terminal/Socket Strip, 0.635mm Pitch, Right Angle to Vertical Board-to-Board Table 5 - Single-Ended Crosstalk (%) Case 1 = Short Row; Case 2 = Long Row Case Input(tr) NEXT 1 FEXT 2 NEXT FEXT 30ps 21.07 2.39 0.29 5.54 2.07 0.27 21.24 2.50 2.07 2.04 GAQG GAGQG Xrow GAQG GAGQG Xrow GAQG GAGQG GAQG GAGQG 50ps 20.46 2.15 0.23 3.08 1.33 0.25 21.04 2.23 1.33 1.53 100ps 18.95 1.85 0.17 1.68 0.61 0.18 20.23 1.89 0.61 0.82 250ps 12.20 1.10 <0.1 0.94 0.21 <0.1 14.84 1.21 0.21 0.34 500ps 6.87 0.62 <0.1 0.61 0.15 <0.1 8.80 0.73 0.15 0.15 Table 6 - Differential Crosstalk (%) Case 1 = Short Row; Case 2 = Long Row Case Input(tr) NEXT 1 FEXT 2 Case 1 Case 2 NEXT FEXT GAAQQG GAAGQQG Xrow GAAQQG GAAGQQG Xrow GAAQQG GAAGQQG GAAQQG GAAGQQG 30ps 6.17 0.38 <0.1 2.09 0.28 <0.1 6.97 0.41 2.71 0.38 50ps 6.01 0.37 <0.1 1.53 0.14 <0.1 6.68 0.39 2.22 0.24 100ps 5.63 0.32 <0.1 1.17 <0.1 <0.1 6.23 0.34 1.64 0.13 250ps 3.79 0.20 <0.1 0.75 <0.1 <0.1 4.67 0.23 1.21 <0.1 500ps 2.18 0.11 <0.1 0.40 <0.1 <0.1 2.90 0.14 0.71 <0.1 Table 7 - Propagation Delay (Mated Connector) Case 1 = Short Row; Case 2 = Long Row 88 ps Single-Ended 84 ps Differential 115 ps Single-Ended 107 ps Differential Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:7 Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 5/1/2013 All Rights Reserved