Wire-wound Type Power Inductor SCWL252010XXXXQ Series Features u This specification applies Low Profile Power Inductors u Halogen free, Lead Free, RoHS Compliance Applications SCWL252010XXXXQ series is generic applied in portable DC to DC converter line. u Mobile phones u HDDs u DSCs u PADs u LCD, LED display, etc. Part Numbering SCWL 2520 10 2R2 M T F Q (1) (2) (3) (4) (5) (6) (7) (8) 1 Product Series 2 Size Code: the first two digitals : length(mm), the last two digitals : width(mm) 3 Thickness (mm) 4 Inductance (μH ), eg. 2R2=2.2μH;R47=0.47μH 5 Inductance tolerance, M: ±20%; Y: ±30% 6 Packaging: T - Embossed plastic tape, 7" reel. 7 Soldering : Green Parts, F - Lead-Free for whole chip 8 Model Code Construction & Dimensions SOCAY Electronics Co., Ltd. Revision February 12, 2014 Symbol 252010 A 2.5 -0.1/+0.2 B 2.0 -0.5/+0.35 C 1.02 Max D 0.85 REF E 0.80 REF www.socay.com 1/6 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Wire-wound Type Power Inductor SCWL252010XXXXQ Series Electrical Characteristics DCR (Ω) ±20% Typ. Max. Typ. Max. ±30% Test Frequency (Hz) 0.1V / 1M 0.030 2.85 2.57 2.80 2.50 0.68 ±30% 0.1V / 1M 0.039 2.70 2.45 2.45 2.20 SCWL2520101R0YTFQ 1.0 ±30% 0.1V / 1M 0.055 2.45 2.05 2.20 1.80 SCWL2520101R5YTFQ 1.5 ±30% 0.1V / 1M 0.090 1.80 1.70 1.70 1.55 SCWL2520102R2MTFQ 2.2 ±20% 0.1V / 1M 0.125 1.60 1.55 1.55 1.40 SCWL2520104R7MTFQ 4.7 ±20% 0.1V / 1M 0.250 1.10 0.95 1.05 0.92 Inductance (μH) Tolerance (%) SCWL252010R47YTFQ 0.47 SCWL252010R68YTFQ Part Number I sat (A) I rms (A) Note: 1. Isat: Based on inductance change (△L/L0:≦-30%) @ ambient temp. 25ºC 2. Irms: Based on temperature rise (△T: 40ºC typ.) Current Characteristics SCWL252010Q-R47Y-ZF SCWL252010Q-R68Y-ZF SCWL252010Q-1R0Y-ZF SCWL252010Q-1R5Y-ZF SOCAY Electronics Co., Ltd. Revision February 12, 2014 www.socay.com 2/6 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Wire-wound Type Power Inductor SCWL252010XXXXQ Series Current Characteristics SCWL252010Q-4R7M-ZF SCWL252010Q-2R2M-ZF Appearance Exposed wire tolerance limit of coating resin part on product side. Size of exposed wire occurring to coating resin is specified below. 1. Width direction (dimension a): Acceptable when a≤w/2 Nonconforming when a>w/2 2. Length direction (dimension b): Dimension b is not specified. 3. The total area of exposed wire occurring to each sides is not greater than 50% of coating resin area, and is acceptable. Material Lists No. Item Material a Core Ferrite Core b Coating Epoxy with magnetic powder c Termination Tin (Pb-Free) d Wire Enameled Copper Wire SOCAY Electronics Co., Ltd. Revision February 12, 2014 www.socay.com 3/6 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Wire-wound Type Power Inductor SCWL252010XXXXQ Series Soldering and Mounting Soldering Mildly activated rosin fluxes are preferred. SOCAY terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Solder re-flow Recommended temperature profiles for re-flow soldering in Figure 1. Solder Iron (Figure 2): Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. u Preheat circuit and products to 150 ℃ u Never contact the ceramic with the iron tip u Use a 20 watt soldering iron with tip diam eter of 1.0mm u 355 ℃ tip temperature (max) u 1.0mm tip diameter (max) u Limit soldering time to 4~5 sec. Recommended PCB Board Pattern SOCAY Electronics Co., Ltd. Revision February 12, 2014 L (mm) G (mm) H (mm) 2.9 0.8 2.4 www.socay.com 4/6 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Wire-wound Type Power Inductor SCWL252010XXXXQ Series Packaging Information Tape Dimension Symbol 252010 A0 (mm) 2.85±0.1 B0 (mm) 2.45±0.1 K0 (mm) 1.40±0.1 P (mm) 4.00±0.1 t (mm) 0.23±0.05 Symbol 7″×8 mm A (mm) 8.4±1.0 B (mm) 50 min C (mm) 13±0.8 D (mm) 178±2 Reel Dimension Tearing off force The force for tearing off cover tape is 15 to 80 grams in the arrow direction under the following conditions. Room Temp. Room Humidity Room atm Tearing Speed (ºC) (%) (hPa) mm/min 5~35 45~85 860~1060 300 Packaging Quantity Type PCS / Reel SCWL252010XXXXQ 2,000 SOCAY Electronics Co., Ltd. Revision February 12, 2014 www.socay.com 5/6 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Wire-wound Type Power Inductor SCWL252010XXXXQ Series Reliability and Test Condition Test Item Operating Temperature Performance Test Method and Remarks -55 ~ +125ºC (For products in unopened tape package, less than 40 ºC) Electrical Performance Test Inductance L Q SRF DC Resistance Refer to standard electrical characteristic list Rated Current Base on temp. rise & △L/L0A ≤30% Agilent-4291, Agilent-4287 Agilent-4192, Agilent-4285 Agilent-4192 Agilent-4338 Saturation DC Current (Isat) will cause L0 to drop approximately △L(%) Mechanical Performance Test Solder Heat Resistance Solderability Test Appearance:No damage Temperature Inductance:within±10% of initial value Q:Shall not exceed the specification value RDC:within ±15% of initial value and shall not exceed the specification value Temperature (ºC) Time (s) 260±5 (Solder Temp) 10±1 Temperature Number of ramp/immersion heat cycles and emersion rate 25mm/s±6mm/s 1 Depth: completely cover the termination More than 95% of terminal electrode should be covered with solder After fluxing, component shall be dipped in a melted solder bath at 235±25ºC for 4±1seconds Reliability Test Life Test Preconditioning: Run through IR reflow for 2 times. IPC/JEDEC J-STD-020D Classification Reflow Profiles Temperature: 125±2ºC(Bead) Temperature: 85±2ºC(Inductor) Applied current: rated current Duration: 1000±12hrs Measured at room temperature after placing for 24±2 hrs Thermal shock Preconditioning: Run through IR reflow for 2 times. IPC/JEDEC J-STD-020D Classification Reflow Profiles Step1: -40±2ºC 30±5min Step2: 25±2ºC ≤0.5min Step3: 105±2ºC 30±5min Number of cycles: 500 Measured at room temperature after placing for 24±2 hrs Appearance: No damage Inductance: within±10% of initial value Q: shall not exceed the specification value. RDC: within ±15% of initial value and shall not exceed the specification value Humidity Resistance Test Preconditioning: Run through IR reflow for 2 times. IPC/JEDEC J-STD-020D Classification Reflow Profiles Humidity: 85±2﹪R.H, Temperature: 85ºC±2ºC Duration: 1000hrs Min. with 100% rated current Measured at room temperature after placing for 24±2 hrs Vibration Test Preconditioning: Run through IR reflow for 2 times. IPC/JEDEC J-STD-020D Classification Reflow Profiles Oscillation Frequency: 10~2K~10Hz for 20 minutes Equipment: Vibration checker Total Amplitude: 0.15mm±10% Testing Time: 12 hours(20 minutes, 12 cycles each of 3 orientations) SOCAY Electronics Co., Ltd. Revision February 12, 2014 www.socay.com 6/6 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information.