Thyristor Surge Suppressors (TSS) P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV Description P0080EA - P5000EA Series are designed to protect broadband equipment such as modems, line card, CPE and DSL from damaging over-voltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards. Features and Benefits u Low voltage overshoot u Low on-state voltage u Does not degrade surge capability after multiple surge events Pinout Designation within limit u Fails short circuit when surged in excess of ratings u Low Capacitance Schematic Symbol Applicable Global Standards u u u u u u u u u PIN3 PIN1 TIA-968-A / TIA-968-B ITU K.20/21 Enhanced level ITU K.20/21 Basic Level GR 1089 Inter building GR 1089 Inter building IEC 6100-4-5 YD/T 1082 YD/T 993 YD/T 950 Electrical Parameters Parameter Definition IS Switching Current - maximum current required to switch to on state IDRM Leakage Current - maximum peak off-state current measured at VDRM IT IH Holding Current - minimum current required to maintain on state IS IH IT On-state Current - maximum rated continuous on-state current VS Switching Voltage - maximum voltage prior to switching to on stat VDRM Peak Off-state Voltage - maximum voltage that can be applied while maintaining off state VT On-state Voltage - maximum voltage measured at rated on-state current C0 Off-state Capacitance - typical capacitance measured in off state SOCAY Electronics Co., Ltd. Revision September 25, 2013 +I IDRM -V +V VT VDRM VS -I www.socay.com 1/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV Electrical Characteristics Part Number Marking VDRM VS VT @IDRM=5μA @100V/μS @IT=2.2A V min V max C0 IS IT IH V max mA max A max mA min pF min pF max @1MHz P0080EA P0080EA 6 25 4 800 2.2 50 25 150 P0300EA P0300EA 25 40 4 800 2.2 50 15 140 P0640EA P0640EA 58 77 4 800 2.2 150 40 60 P0720EA P0720EA 65 88 4 800 2.2 150 35 60 P0900EA P0900EA 75 98 4 800 2.2 150 25 55 P1100EA P1100EA 90 130 4 800 2.2 150 30 50 P1300EA P1300EA 120 160 4 800 2.2 150 25 45 P1500EA P1500EA 140 180 4 800 2.2 150 25 40 P1800EA P1800EA 170 220 4 800 2.2 150 25 35 P2000EA P2000EA 180 220 4 800 2.2 150 20 35 P2300EA P2300EA 190 260 4 800 2.2 150 25 35 P2600EA P2600EA 220 300 4 800 2.2 150 20 35 P3100EA P3100EA 275 350 4 800 2.2 150 20 35 P3500EA P3500EA 320 400 4 800 2.2 150 20 35 P4000EA P4000EA 360 460 4 800 2.2 150 20 35 P4500EA P4500EA 400 540 4 800 2.2 150 20 35 P5000EA P5000EA 440 600 4 800 2.2 150 20 35 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. Surge Ratings 2/10μS1 Series 2/10μS 2 8/20μS1 1.2/50μS A min A 150 2 10/160μS1 10/560μS1 10/1000μS1 2 2 2 10/160μS 10/560μS 10/1000μS 5/310μS1 10/700μS A min A min A min A min A min 150 90 50 45 50 Notes: 1. Current waveform in µs 2. Voltage waveform in µs 2 ITSM 50/60 Hz A min 20 di/dt Amps/µs max 500 - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C Thermal Considerations Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range - 40 to + 150 °C TS Storage Temperature Range - 40 to +150 °C RθJA Thermal Resistance: Junction to Ambient 90 °C/W TO-92 SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 2/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV Characteristic Curves Figure 2 - tr × td Pulse Waveform Figure 1 - V-I Characteristics +I Ipp – Peak Pulse Current - % Ipp IT IS IH IDRM -V +V VT VDRM VS tr=rise time to peak value td=decay time to half value 100 Peak Value Waveform=tr×td 50 Half Value 50 tr td 0 t – Time (μs) -I Figure 4 - Normalized DC Holding Current Versus Case Temperature Figure 3 - Normalized VS Change Versus Junction Temperature 2.0 1.8 IH IH (TC=25℃) 12 10 8 6 25℃ 4 2 Ration of Percent of VS Change - % 14 9 -4 -6 -8 1.6 1.4 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ℃ Junction Temperature (TJ) - ℃ SOCAY Electronics Co., Ltd. Revision September 25, 2013 25℃ 1.2 www.socay.com 3/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV Environmental Specifications Physical Specifications 80% Rated VDRM (VAC Peak ) +125°C or +150°C, High Temp Voltage Lead Material Copper Alloy High Temp Voltage Blocking Blocking 504 or 1008 hrs. MIL-STD-750 (Method Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 1040) JEDEC, JESD22-A-101 -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. Temp Cycling MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. Humidity JEDEC, JESD22-A-101 +150°C 1008 hrs. High Temp Storage EIA/ MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock Thermal Shock 10 cycles. 0°C to +100°C, 5 min. dwell, 10 sec. transfer, MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure +121°C, 100%RH, 2atm, 24 up to 168 hrs. Cooker Test) EIA/Cooker Test) JEDEC, JESD22-A-102 +260°C, 30 secs. MIL-STD-750 (Method 2031 Resistance to Solder Heat Moisture Sensitivity 85%RH, +85°C, 168 hrs., 3 reflow cycles Level Level (+260°C Peak). JEDEC-J-STD-020, Level 1 Soldering Parameters Reflow Condition TP Ramp-up Critical Zone TL to TP Pre Heat Lead–free assembly -Temperature Min (Ts(min)) +150°C -Temperature Max (Ts(max)) +200°C -Time (min to max) (ts) 60 -180 Seconds TL Temperature TS(max) Ramp-down Average ramp up rate ( Liquidus Temp TL) to peak 3°C/Second Max TS(max) to TL - Ramp-up Rate 3°C/Second Max TS(min) Preheat 25 Time to peak temperature (t 25℃ to peak) Time SOCAY Electronics Co., Ltd. Revision September 25, 2013 - Temperature (TL) (Liquidus) +217°C - Time (min to max) (ts) 60 -150 Seconds Reflow Peak Temperature (TP) 260 +0/-5°C Time within 5°C of actual peak Temperature (tp) 30 Seconds Max Ramp-down Rate 6°C/Second Max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed +260°C www.socay.com 4/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Thyristor Surge Suppressors (TSS) P0080EA - P5000EA Series - TO-92 @10/700μS, 2KV Part Numbering Part Marking Part Marking Code PXXXXE A (Refer to Electrical Characteristics Table) Date code Dimensions TO-92 Inches Dimensions MT1/PIN1 MT2/PIN3 Millimeters Min Max Min Max A 0.176 0.196 4.47 4.98 B 0.500 D 0.095 12.70 0.105 2.41 2.67 E 0.150 G 0.135 0.145 3.43 3.68 H 0.088 0.096 2.23 2.44 J 0.176 0.186 4.47 4.73 K 0.088 0.096 2.23 2.44 L 0.013 0.019 0.33 0.48 M 0.013 0.017 0.33 0.43 N 3.81 0.060 1.52 All leads are insulated from case. Case is electrically non-conductive. (Rated at 1600 V(AC) RMS for one minute from leads to case over the operating temperature range.) The TO-92 is designed to meet mechanical standards as set forth in JEDEC publication number 95. Mold flash shall not exceed 0.13 mm per side. Packaging Part Number Description Quantity Pxxx0EA TO-92 Bulk Pack 1000 SOCAY Electronics Co., Ltd. Revision September 25, 2013 www.socay.com 5/5 @SOCAY Electronics Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.socay.com for current information.