P1302SB

Thyristor Surge Suppressors (TSS)
P0642SB – P6002SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Description
P0642SB-P6002SB Series are very low capacitance devices
designed to protect broadband equipment such as VoIP, DSL
modems and DSLAMs from damaging over-voltage transients. This
series provides a surface mount solution that enables equipment to
comply with global regulatory standards, while limiting the impact to
broadband signals.
Features and Benefits
u
u
u
u
u
u
Low voltage overshoot
Low on-state voltage
Does not degrade with use
Fails short circuit when surged in excess of ratings
Low distortion
40% lower capacitance than comparable product
Schematic Symbol
Applicable Global Standards
u
u
u
u
u
u
u
u
TIA-968-A
ITU K.20/21 Enhanced level
ITU K.20/21 Basic Level
GR 1089 Inter building
IEC 6100-4-5
YD/T 1082
YD/T 993
YD/T 950
Electrical Parameters
Parameter
Definition
IS
Switching Current - maximum current required to switch to
on state
IDRM
Leakage Current - maximum peak off-state current
measured at VDRM
IH
Holding Current - minimum current required to maintain on
state
IT
On-state Current - maximum rated continuous on-state
current
VS
Switching Voltage - maximum voltage prior to switching to
on stat
VDRM
Peak Off-state Voltage - maximum voltage that can be
applied while maintaining off state
VT
On-state Voltage - maximum voltage measured at rated
on-state current
C0
Off-state Capacitance - typical capacitance measured in
off state
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
+I
IT
IS
IH
IDRM
-V
+V
VT
VDRM
VS
-I
www.socay.com
1/5
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Thyristor Surge Suppressors (TSS)
P0642SB – P6002SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Electrical Characteristics
Part
Number
Marking
VDRM
VS
VT
@IDRM=5μA
@100V/μS
@IT=2.2A
V min
V max
C0
IS
IT
IH
V max
mA max
A max
mA min
pF min
pF max
@1MHz
P0642SB
P06B
58
77
4
800
2.2
120
25
45
P0722SB
P07B
65
88
4
800
2.2
120
20
45
P0902SB
P09B
75
98
4
800
2.2
120
20
40
P1102SB
P11B
90
130
4
800
2.2
120
15
35
P1302SB
P13B
120
160
4
800
2.2
120
15
35
P1502SB
P15B
140
180
4
800
2.2
120
15
30
P1802SB
P18B
170
220
4
800
2.2
120
10
30
P2302SB
P23B
190
260
4
800
2.2
120
10
25
P2602SB
P26B
220
300
4
800
2.2
120
10
25
P3002SB
P30B
280
360
4
800
2.2
120
10
25
P3502SB
P35B
320
400
4
800
2.2
120
10
20
P4202SB
P42B
380
500
4
800
2.2
120
10
20
P4802SB
P48B
440
600
4
800
2.2
120
5
20
P6002SB
P60B
550
700
4
800
2.2
120
5
20
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional.
Surge Ratings
2/10μS1
Series
2/10μS
2
8/20μS1
1.2/50μS
A min
B
250
2
10/160μS1
10/560μS1
10/1000μS1
2
2
2
10/160μS
10/560μS
10/1000μS
5/310μS1
10/700μS
A min
A min
A min
A min
A min
250
150
100
80
100
Notes:
1. Current waveform in µs
2. Voltage waveform in µs
2
ITSM
50/60 Hz
A min
30
di/dt
Amps/µs max
500
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPP ratings applicable over temperature range of -40ºC to +85ºC
- The device must initially be in thermal equilibrium with -40°C < TJ < +150°C
Thermal Considerations
Package
Symbol
Parameter
Value
Unit
DO-214AA
TJ
Operating Junction Temperature Range
- 40 to + 150
°C
TS
Storage Temperature Range
- 40 to +150
°C
RθJA
Thermal Resistance: Junction to Ambient
90
°C/W
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
www.socay.com
2/5
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Thyristor Surge Suppressors (TSS)
P0642SB – P6002SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Characteristic Curves
Figure 2 - tr × td Pulse Waveform
Figure 1 - V-I Characteristics
+I
Ipp – Peak Pulse Current - % Ipp
IT
IS
IH
IDRM
-V
+V
VT
VDRM
VS
tr=rise time to peak value
td=decay time to half value
100
Peak
Value
Waveform=tr×td
50
Half Value
50
tr
td
0
t – Time (μs)
-I
Figure 4 - Normalized DC Holding Current Versus Case
Temperature
Figure 3 - Normalized VS Change Versus Junction
Temperature
2.0
1.8
IH
IH (TC=25℃)
12
10
8
6
25℃
4
2
Ration of
Percent of VS Change - %
14
9
-4
-6
-8
1.6
1.4
1.0
0.8
0.6
0.4
-40
-20 0
20
40
60
80
100
120
140
160
-40 -20
0
20
40
60
80
100
120
140
160
Case Temperature (TC) - ℃
Junction Temperature (TJ) - ℃
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
25℃
1.2
www.socay.com
3/5
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Thyristor Surge Suppressors (TSS)
P0642SB – P6002SB Series - DO-214AA(SMB)
Environmental Specifications
@10/700μS, 4KV
Physical Specifications
80% Rated VDRM (VAC Peak ) +125°C or +150°C,
High Temp Voltage
Lead Material Copper Alloy High Temp Voltage
Blocking
Blocking 504 or 1008 hrs. MIL-STD-750 (Method
Lead Material
Copper Alloy
Terminal Finish
100% Matte-Tin Plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
1040) JEDEC, JESD22-A-101
-65°C to +150°C, 15 min. dwell, 10 up to 100 cycles.
Temp Cycling
MIL-STD-750
(Method
1051)
EIA/JEDEC,
JESD22-A104
Biased Temp &
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs.
Humidity
JEDEC, JESD22-A-101
+150°C 1008 hrs.
High Temp Storage
EIA/
MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
Low Temp Storage
-65°C, 1008 hrs.
Thermal Shock
Thermal Shock 10 cycles.
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
MIL-STD-750 (Method
1056) JEDEC, JESD22-A-106
Autoclave (Pressure
+121°C, 100%RH, 2atm, 24 up to 168 hrs.
Cooker Test)
EIA/Cooker Test)
JEDEC, JESD22-A-102
+260°C, 30 secs.
MIL-STD-750 (Method 2031
Resistance to Solder
Heat
Moisture Sensitivity
85%RH, +85°C, 168 hrs., 3 reflow cycles Level
Level
(+260°C Peak).
JEDEC-J-STD-020, Level 1
Soldering Parameters
Reflow Condition
TP
Ramp-up
Critical Zone
TL to TP
Pre Heat
Lead–free assembly
-Temperature Min (Ts(min))
+150°C
-Temperature Max (Ts(max))
+200°C
-Time (min to max) (ts)
60 -180 Seconds
TL
Temperature
TS(max)
Ramp-down
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/Second Max
TS(max) to TL - Ramp-up Rate
3°C/Second Max
TS(min)
Preheat
25
Time to peak temperature
(t 25℃ to peak)
Time
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
- Temperature (TL) (Liquidus)
+217°C
- Time (min to max) (ts)
60 -150 Seconds
Reflow
Peak Temperature (TP)
260 +0/-5°C
Time within 5°C of actual peak Temperature
(tp)
30 Seconds Max
Ramp-down Rate
6°C/Second Max
Time 25°C to peak Temperature (TP)
8 minutes Max
Do not exceed
+260°C
www.socay.com
4/5
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Thyristor Surge Suppressors (TSS)
P0642SB – P6002SB Series - DO-214AA(SMB)
@10/700μS, 4KV
Part Marking
Part Numbering
Part Marking Code
(Refer to Electrical Characteristics Table)
Date code
Dimensions
DO-214AA
Inches
Dimensions
Inch
(millimeter)
Pad outline
Millimeters
Min
Max
Min
Max
A
0.130
0.156
3.30
3.95
B
0.201
0.220
5.10
5.60
C
0.077
0.087
1.95
2.20
D
0.159
0.181
4.05
4.60
E
0.030
0.063
0.76
1.60
F
0.076
0.096
1.90
2.45
G
0.002
0.008
0.05
0.20
H
0.077
0.104
1.95
2.65
K
0.006
0.016
0.15
0.41
Packaging
Part Number
Component
Package
Quantity
Packaging
Option
Packaging
Specification
Pxxx2SB
DO-214AA
2500
Tape & Reel -12mm/13″tape
EIA -481 - D
Tape and Reel Specifications
12.99
(330.0)
0.157
(4.0)
0.512(13.0)
Arbor Hole Diameter
0.059 Diameter
(1.5)
0.472
(12.0)
0.36
(9.2)
0.315
(8.0)
Cover tape
0.49
(12.4)
Direction of Feed
SOCAY Electronics Co., Ltd.
Revision September 25, 2013
Dimensions are in inches
(and millimeters)
www.socay.com
5/5
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.