AD4C250 - Solid State Optronics

AD4C250
Dual 1 Form A
Solid State Relay
DESCRIPTION
The AD4C250 is a bi-directional, double-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace
electromechanical relays and reed relays in special applications that call for very fast switching times. The relay consists of two integrated
circuits, each driving a pair of rugged source-to-source enhancement type DMOS transistors. Each integrated circuit is optically coupled
to a light emitting diode. The output MOS transistors are specially designed to exhibit extremely low output capacitance and leakage
current characteristics, making this device ideal for switching high frequency signals.
FEATURES
APPLICATIONS
•
Two optically isolated SSRs in compact 8 pin DIP package
•
Multiplexers
•
Fast switching speed (Ton = 50us TYP)
•
Meter reading systems
•
Low output capacitance (3pF MAX)
•
Data Acquisition
•
Low input control power consumption (5mA MAX)
•
Medical equipment
•
40mA maximum continuous load current
•
Battery monitoring
•
Long life/high reliability
•
RoHS / Pb-Free / REACH Compliant
OPTIONS/SUFFIXES*
•
-H
High Input / Output isolation
•
-S
Surface Mount Leadform Option (50 pcs / tube)
•
-TR
Tape and Reel Packing Option (1,000 pcs / reel)
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT
MIN
Storage Temperature
°C
-55
125
Operating Temperature
°C
-40
85
Continuous Input Current
mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
V
Output Power Dissipation
TYP
MAX
6
mW
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
•
Approved to UL1950, UL1577, UL508
•
Approved to (BSI) EN60950, EN41003, EN60065
•
CSA Approved
Page 1 of 5
AD4C250
rev 1.42 (10/7/2009)
AD4C250
Dual 1 Form A
Solid State Relay
ELECTRICAL CHARACTERISTICS - 25°C
PARAMETER
UNIT
MIN
TYP
MAX
1.2
1.5
TEST CONDITIONS
INPUT SPECIFICATIONS
LED Forward Voltage
V
LED Reverse Voltage
6
12
V
Turn-On Current
mA
2.5
Turn-Off Current
mA
0.5
If = 10mA
Ir = 10uA
5
Io = 40mA
OUTPUT SPECIFICATIONS
Blocking Voltage
V
Continuous Load Current
mA
On-Resistance
Leakage Current
Output Capacitance
Offset Voltage
250
Io = 1uA
40
If = 5mA
Ω
225
300
Io = 40mA
nA
10
100
Vo = 250V
pF
1.5
3
0.2
mV
Vo = 25V, f = 1.0MHz
If = 5mA
COUPLED SPECIFICATIONS
Isolation Voltage
-H Suffix
Turn-On Time
V
2500
V
3750
T = 1 minute
T = 1 minute
µs
50
500
If = 5mA, Io = 40mA
Turn-Off Time
µs
150
500
If = 0mA, Io = 40mA
Isolation Resistance
GΩ
Coupled Capacitance
pF
Contact Transient Ratio
V/
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
100
3
µs
2000
Page 2 of 5
7000
dV = 50V
AD4C250
rev 1.42 (10/7/2009)
AD4C250
Dual 1 Form A
Solid State Relay
PERFORMANCE DATA
AD4C250
AD4C250
Typical Turn-On Time Distribution
N = 100, Ambient Temperature = 25°C
Typical Turn-Off Time Distribution
N = 100, Ambient Temperature = 25°C
Device Count
40
30
20
10
0
60
50
40
30
20
10
0
0.01 0.03 0.05 0.07 0.09 0.11 0.13 0.15
0
0.02 0.04 0.06 0.08 0.1 0.12 0.14
Turn-On Tim e (m s)
Turn-Off Tim e (m s)
AD4C250
AD4C250
Typical On-Resistance Distribution
N = 100, Ambient Temperature = 25°C
Typical Leakage Current Distribution
N = 100, Ambient Temperature = 25°C
80
Device Count
40
30
20
10
0
60
40
20
0
170 180 190 200 210 220 230 240
0
0.01 0.03 0.05 0.07 0.09 0.11 0.13
On-Resistance (ohm s)
AD4C250
Maximum Load Current vs. Temperature
Blocking Voltage (V)
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
0
80
260 265 270 275 280 285 290 295
60
0
20
10
40
20
40
30
-2
0
40
50
-4
0
60
Load Current (mA)
AD4C250
Typical Blocking Voltage Distribution
N = 100, Ambient Temperature = 25°C
80
Device Count
Leakage Current (uA)
20
Device Count
50
0
Device Count
50
Tem perature (C)
Page 3 of 5
AD4C250
rev 1.42 (10/7/2009)
AD4C250
Dual 1 Form A
Solid State Relay
MECHANICAL DIMENSIONS
8 PIN DUAL IN-LINE PACKAGE
8 PIN SURFACE MOUNT DEVICE
END VIEW
END VIEW
TOP VIEW
TOP VIEW
BOTTOM VIEW/
BOARD PATTERN
BOTTOM VIEW/
BOARD PATTERN
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 4 of 5
AD4C250
rev 1.42 (10/7/2009)
AD4C250
Dual 1 Form A
Solid State Relay
DISCLAIMER
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO
reserves the right to make changes to product description, specifications at any time without further notice.
SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent
licenses nor indemnity are expressed or implied.
Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other
warranty, expressed or implied, including merchantability and fitness for particular use.
LIFE SUPPORT POLICY
SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or
death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all
damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be
reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system
whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness.
© 2009 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 5 of 5
AD4C250
rev 1.42 (10/7/2009)