AD6C111-L 1 Form A Solid State Relay DESCRIPTION The AD6C111-L is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. This device also includes currentlimiting circuitry. During increased load currents or transient current spikes, this circuitry acts to bring the current down, protecting downstream components. FEATURES APPLICATIONS • High input-to-output isolation • Reed relay replacement • Low input control power consumption • Meter reading systems • 110mA maximum continuous load current • Medical equipment • 40 ohms maximum on-resistance • Battery monitoring • Long life/high reliability • Multiplexers • Current limiting OPTIONS/SUFFIXES* • -S Surface Mount Option • -TR Tape and Reel Option NOTE: Suffixes listed above are not included in marking on device for part number identification. SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS* PARAMETER UNIT MIN Storage Temperature °C -55 125 Operating Temperature °C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage V Output Power Dissipation TYP MAX 6 mW 800 *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. APPROVALS • © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 • BABT CERTIFICATE #607836: BS EN 60950, BS EN 41003, BS EN 60065 CSA CERTIFICATE #LR111581-1 • UL FILE #E90096 Page 1 of 6 AD6C111-L rev 1.4 (10/25/04) AD6C111-L 1 Form A Solid State Relay © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 2 of 6 AD6C111-L rev 1.4 (10/25/04) AD6C111-L 1 Form A Solid State Relay ELECTRICAL CHARACTERISTICS - 25°C PARAMETER UNIT MIN TYP MAX 1.2 1.5 TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V LED Reverse Voltage V 6 12 Ir = 10uA mA 5 2.5 Io = 110mA Turn-On Current Turn-Off Current If = 10mA 0.5 mA OUTPUT SPECIFICATIONS Blocking Voltage V Continuous Load Current mA Current Limit mA On-Resistance 400 120 Io = 10uA 110 If = 5mA 150 180 If = 5mA Ω 30 40 Io = 110mA Leakage Current µA 0.2 10 Vo = 400V Output Capacitance pF 25 50 Vo = 25V, f = 1.0MHz Offset Voltage mV 0.2 If = 5mA COUPLED SPECIFICATIONS Isolation Voltage -H Suffix Turn-On Time V 2500 V 3750 T = 1 minute T = 1 minute ms 0.5 Turn-Off Time ms 0.1 Isolation Resistance GΩ Coupled Capacitance pF Contact Transient Ratio © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 V/ 1 If = 5mA, Io = 110mA 0.5 If = 5mA, Io = 110mA 100 3 µs 2000 Page 3 of 6 7000 dV = 50V AD6C111-L rev 1.4 (10/25/04) AD6C111-L 1 Form A Solid State Relay PERFORMANCE DATA AD6C111-L AD6C111-L Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 40 Device Count 30 20 10 0 30 20 10 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.04 0.08 Turn-On Tim e (m s) 0.24 0.28 AD6C111-L Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C Device Count 40 30 20 10 0 25 26 27 28 29 30 31 60 50 40 30 20 10 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 Leakage Current (uA) AD6C111-L Maximum Load Current vs. Temperature 0 380 400 420 440 460 480 500 520 Blocking Voltage (V) © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 50 0 80 10 100 60 20 -2 0 30 150 -4 0 40 Load Current (mA) AD6C111-L Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C 40 Device Count 0.2 AD6C111-L On-Resistance (ohm s) Device Count 0.16 Turn-Off Tim e (m s) 50 24 0.12 20 0.1 0 Device Count 40 Tem perature (C) Page 4 of 6 AD6C111-L rev 1.4 (10/25/04) AD6C111-L 1 Form A Solid State Relay MECHANICAL DIMENSIONS 6 PIN DUAL IN-LINE PACKAGE 6 PIN SURFACE MOUNT DEVICE END VIEW END VIEW TOP VIEW TOP VIEW BOTTOM VIEW/ BOARD PATTERN BOTTOM VIEW/ BOARD PATTERN © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 5 of 6 AD6C111-L rev 1.4 (10/25/04) AD6C111-L 1 Form A Solid State Relay DISCLAIMER Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 6 of 6 AD6C111-L rev 1.4 (10/25/04)