AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay Description Features The AD4C201 is a bi-directional, double-pole, single-throw, normally open MOSFET output solid-state relay. This device offers two discrete and independently controlled optically isolated SSRs in one miniature 8 pin package. Each discrete relay consists of an infrared LED, optically coupled to a Photo Diode Array, which in turn drives a pair of back-to-back enhancement MOSFETs. Its high blocking voltage (600V) and the integration of two devices in one package make the AD4C201 ideal in high load voltage applications where board space is limited. The AD4C201 comes standard in a compact 8 pin DIP package making it ideal for high-density board applications. High Blocking Voltage (600V) Low Input Control Current (2.5mA TYP) 150mA Maximum Continuous Load Current Low On Resistance (17 TYP) High Isolation Voltage (3.75kVRMS, Optional 5kVRMS) Long Life / High Reliability RoHS / Pb-Free / REACH Compliant Agency Approvals UL/C-UL: VDE: File # E201932 File # 40035191 (EN 60747-5-2) Applications EMR Replacement Meter Reading Systems Medical Equipment Battery Monitoring Multiplexers Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage to the device and may adversely affect reliability. Schematic Diagram (+) Input 1 1 8 (+/-) Load 1 (-) Input 1 2 7 (-/+) Load 1 Storage Temperature …………………………..-55 to +125°C Operating Temperature …………………………-40 to +85°C Continuous Input Current ………………………………..50mA Transient Input Current …..…. ..……….……………..400mA Reverse Input Control Voltage …………..…………………5V Input Power Dissipation …………………………………40mW Output Power Dissipation ……………………………..800mW Solder Temperature – Wave (10sec)……………….….260°C Solder Temperature – IR Reflow (10sec)….…………..260°C Ordering Information (+) Input 2 (-) Input 2 3 6 4 5 (+/-) Load 2 (-/+) Load 2 Description AD4C201 AD4C201-H AD4C201-S AD4C201-HS AD4C201-STR AD4C201-HSTR 8 pin DIP, (50/Tube) 5kVRMS Viso, 8 pin DIP, (50/Tube) 8 pin SMD, (50/Tube) 5kVRMS, 8 pin SMD, (50/Tube) 8 pin SMD, Tape and Reel (1000/Reel) 5kVRMS, 8 pin SMD, Tape and Reel (1000/Reel) NOTE: Suffixes listed above are not included in marking on device for part number identification AD4C201 © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Part Number Page 1 of 8 AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746 AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay Electrical Characteristics, TA = 25°C (unless otherwise specified) Parameter Symbol Min. Typ. Max. Units Test Conditions Input Specifications LED Forward Voltage VF - 1.2 1.5 V IF = 10mA LED Reverse Voltage BVR 5 - - V IR = 10μA Turn-On Current (LED Trigger) IF - 2.5 5 mA IO = 150mA IFOFF - 0.5 - mA IO = 150mA Ct - 30 - Blocking Voltage VB 600 - - V Continuous Load Current IO - - 150 mA RON - 17 20 Ω Turn-Off Current Terminal Capacitance pF V=0, f=1MHz Output Specifications On Resistance IF=0mA, IO=1A IF=5mA IF=5mA, IO=150mA Leakage Current IOleak - 0.2 1 A VO=600V Output Capacitance COUT - 20 - pF IF=0mA, f=1.0MHz VOFFSET - - 0.2 mV IF=5mA Turn-On Time TON - 2 5 mS IF=5mA, IO=150mA Turn-Off Time TOFF - 0.05 1 mS IF=0mA, IO=150mA CS - 0.6 - - 2,000 7,000 0 Offset Voltage Coupled Specifications Input to Output Capacitance Contact Transient Ratio pF V=0, f=1MHz V/S dV = 50V VRMS RH ≤ 50%, t=1min Isolation Specifications Isolation Voltage (-H Option) Input-Output Resistance © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 VISO RI-O 3750 - - 5000 - - - 10 Page 2 of 8 12 - RH ≤ 50%, VI-O = 500VDC AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746 AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay AD4C201 Performance & Characteristics Plots, TA = 25°C (unless otherwise specified) © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 3 of 8 AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746 AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay AD4C201 Solder Temperature Profile Recommendations (1) Infrared Reflow: Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow. Soldering process should not exceed temperature or time limits expressed herein. Surface temperature of device package should not exceed 250ºC: G F D E H B A C Figure 1 Process Step A B C D E F G H Description Preheat Start Temperature (ºC) Preheat Finish Temperature (ºC) Preheat Time (s) Melting Temperature (ºC) Time above Melting Temperature (s) Peak Temperature, at Terminal (ºC) Dwell Time at Peak Temperature (s) Cool-down (ºC/s) Parameter 150ºC 180ºC 90 - 120s 230ºC 30s 260ºC 10s <6ºC/s (2) Wave Solder: Maximum Temperature: Maximum Time: Pre-heating: Single Occurrence 260ºC (at terminal) 10s 100 - 150ºC (30 - 90s) (3) Hand Solder: Maximum Temperature: Maximum Time: Single Occurrence © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 350ºC 3s (at tip of soldering iron) Page 4 of 8 AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746 AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay AD4C201 Package Dimensions 8 PIN DIP Package © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Note: Page 5 of 8 All dimensions in inches [“] with millimeters in parenthesis () AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746 AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay AD4C201 Package Dimensions 8 PIN SMD Surface Mount Package (-S) © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Note: Page 6 of 8 All dimensions in inches [“] with millimeters in parenthesis () AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746 AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay AD4C201 Package Dimensions 8 PIN SMD Tape & Reel (-STR) © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Note: Page 7 of 8 All dimensions in millimeters AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746 AD4C201 Dual 1 Form A 600V / 20 Ω MOSFET Output Solid State Relay AD4C201 Package Marking AD4C201 YYWW Date Code Pin 1 AD4C201 Package Weights Single Unit Full Tube (50pcs) Full Pouch (10 tubes) Full Reel (1000pcs) AD4C201-(H) 0.54 42 420 - AD4C201-(H)S 0.53 44 440 - AD4C201-(H)STR 0.53 - - 950 Device Note: All weights above are in GRAMS, and include packaging materials where applicable DISCLAIMER Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notices. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO’s Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 8 of 8 AD4C201 /H/S/TR Rev 2.00 (11/25/2013) 001746