SYZ6070 DC Input 700V Photo SCR / Thyristor Description Features The SYZ6070 consists of a single input AlGaAs LED optically coupled to a photo-sensitive SCR. Optical coupling provides high isolation levels (up to 5kVRMS) while maintaining low-level DC signal control capability. With high load voltage and low input current, the SYZ6070 is an ideal solution for driving high voltage SCRs, Triacs and Solid State Relays. The SYZ6070 comes standard in a compact 6 pin DIP package making it ideal for high-density board applications. Low Input Control Current (5mA MAX) High Blocking Voltage (700V) 400mA Maximum Continuous Current High Isolation Voltage (up to 5kVRMS) High Transient Immunity (dV/dt = 400V/S MIN) Long Life / High Reliability RoHS / Pb-Free / REACH Compliant Agency Approvals UL/C-UL: VDE: Applications Home Appliances Motor / Drive Controls Solid State Relays Solenoid / Valve Controls Temperature Controls Dimmer Controls File # E201932 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage to the device and may adversely affect reliability. Schematic Diagram (+) Input 1 6 Gate (-) Input 2 5 Anode Storage Temperature …………………………..-55 to +125°C Operating Temperature …….………...…..……-40 to +85°C Continuous Input Current ………………………………..50mA Transient Input Current ………………….……………..400mA Transient Output Current ………………………..……….10A Reverse Input Control Voltage …………..…………………5V Input Power Dissipation …………………………………40mW Output Power Dissipation ……………………………..500mW Solder Temperature – Wave (10sec)……………….….260°C Solder Temperature – IR Reflow (10sec)….…………..260°C Ordering Information Part Number Do Not Connect 3 4 Cathode SYZ6070 SYZ6070 SYZ6070-H SYZ6070-S SYZ6070-HS SYZ6070-STR SYZ6070-HSTR Description 6 pin DIP, (60/Tube) 5kVRMS VISO, 6 pin DIP, (60/Tube) 6 pin SMD, (60/Tube) 5kVRMS, 6 pin SMD, (60/Tube) 6 pin SMD, Tape and Reel (1000/Reel) 5kVRMS, 6 pin SMD, Tape and Reel (1000/Reel) NOTE: Suffixes listed above are not included in marking on device for part number identification © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 1 of 8 SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763 SYZ6070 DC Input 700V Photo SCR / Thyristor Electrical Characteristics, TA = 25°C (unless otherwise specified) Parameter Symbol Min. Typ. Max. Units Test Conditions Input Specifications LED Forward Voltage VF - 1.2 1.5 V IF = 10mA LED Reverse Voltage BVR 5 - - V IR = 10μA IInRleak - - 10 A VR = 5μA IInOn - 2.5 5 mA IO = 400mA Forward Blocking Voltage VDM 700 - - V RGK=10kΩ, TA=100°C, ID=150A Reverse Blocking Voltage VRM 700 - - V RGK=10kΩ, TA=100°C, IR=150A Continuous Load Current IDM - - 400 mA Transient Surge Current IDM (PEAK) - - 10 A T = 16S VTM - 1.1 1.4 V IF = 5mA, IDM = 400mA Forward Leakage Current IDM - 1 10 A RGK=10kΩ, TA=100°C, VDM=700V, IF=0 Reverse Leakage Current IRM - 1 10 A RGK=10kΩ, TA=100°C, VRM=700V, IF=0 Gate Trigger Voltage VGT - 0.6 1 V VFX=100V, RGK=27kΩ, RL=10kΩ IGT - 20 50 A VFX=100V, RGK=27kΩ, RL=10kΩ dV/dt 400 - - V/S - - - VRMS RH ≤ 50%, t=1min Reverse Leakage Current 1 Trigger (Must Operate) Current Output Specifications On-State Voltage Gate Trigger Current Critical Rate of Rise 2 IF = 5mA Isolation Specifications Isolation Voltage (-H Option) Input-Output Resistance VISO RI-O 3750 5000 - 10 12 - Note 1: Resistive load. For inductive loads, higher drive current is recommended Note 2: This is for static dV/dt. © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 2 of 8 VI-O = 500VDC SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763 SYZ6070 DC Input 700V Photo SCR / Thyristor SYZ6070 Performance & Characteristics Plots, TA = 25°C (unless otherwise specified) © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 3 of 8 SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763 SYZ6070 DC Input 700V Photo SCR / Thyristor SYZ6070 Solder Temperature Profile Recommendations (1) Infrared Reflow: Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow. Soldering process should not exceed temperature or time limits expressed herein. Surface temperature of device package should not exceed 250ºC: G F D E H B A C Figure 1 Process Step A B C D E F G H Description Preheat Start Temperature (ºC) Preheat Finish Temperature (ºC) Preheat Time (s) Melting Temperature (ºC) Time above Melting Temperature (s) Peak Temperature, at Terminal (ºC) Dwell Time at Peak Temperature (s) Cool-down (ºC/s) Parameter 150ºC 180ºC 90 - 120s 230ºC 30s 260ºC 10s <6ºC/s (2) Wave Solder: Maximum Temperature: Maximum Time: Pre-heating: Single Occurrence 260ºC (at terminal) 10s 100 - 150ºC (30 - 90s) (3) Hand Solder: Maximum Temperature: Maximum Time: Single Occurrence © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 350ºC 3s (at tip of soldering iron) Page 4 of 8 SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763 SYZ6070 DC Input 700V Photo SCR / Thyristor SYZ6070 Package Dimensions 6 PIN DIP Package © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Note: Page 5 of 8 All dimensions in millimeters with inches [“] in parenthesis () SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763 SYZ6070 DC Input 700V Photo SCR / Thyristor SYZ6070 Package Dimensions 6 PIN SMD Surface Mount Package (-S) © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Note: Page 6 of 8 All dimensions in millimeters with inches [“] in parenthesis () SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763 SYZ6070 DC Input 700V Photo SCR / Thyristor SYZ6070 Package Dimensions 6 PIN SMD Tape & Reel (-STR) © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Note: Page 7 of 8 All dimensions in millimeters SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763 SYZ6070 DC Input 700V Photo SCR / Thyristor SYZ6070 Package Marking SYZ6070 YYWW Date Code Pin 1 SYZ6070 Package Weights Single Unit Full Tube (60pcs) Full Pouch (10 tubes) Full Reel (1000pcs) SYZ6070-(H) 0.41 43 450 - SYZ6070-(H)S 0.40 42 440 - SYZ6070-(H)STR 0.40 - - 880 Device Note: All weights above are in GRAMS, and include packaging materials where applicable DISCLAIMER Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notices. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO’s Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. © 2013 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 8 of 8 SYZ6070 /H/S/TR Rev 2.00 (11/25/2013) 001763