RPO Series Compensated and calibrated pressure sensors FEATURES · 0...50 mbar to 0...16 bar and 0...1 to 0...250 psi gage or differential · High impedance bridge · Miniature package · Different pinning configurations · Usable for wet/wet applications8 · Sensortechnics PRO services MEDIA COMPATIBILITY All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride port 29: - polyetherimide - fluor-silicone - silicon ELECTRICAL CONNECTION SPECIFICATIONS Maximum ratings Supply voltage 16 V Temperature limits Storage Operating -55 to +100°C -40 to +85°C Lead temperature (10 sec. soldering) Humidity limits +Vs 1 300°C 4 - 0...100 %RH Output Vibration (MIL-STD-202, Meth. 213) Mechanical shock (qualification tested) 150 g half sine 11 msec. 150 g 2 + 3 E / 11703 / C www.sensortechnics.com RPO Series Compensated and calibrated pressure sensors PRESSURE SENSOR CHARACTERISTICS (Vs = 10.0 ± 0.01 V, tamb = 25 °C, p2 > p1) Part number Operating pressure Proof pressure1 RPOM050... RPOM100... RPOM250... RPOB001... RPOB002... RPOB005... RPOB010... RPOB016... RPOP001... RPOP005... RPOP015... RPOP030... RPOP100... RPOP250... 0...50 mbar 0...100 mbar 0...250 mbar 0...1 bar 0...2 bar 0...5 bar 0...10 bar 0...16 bar 0...1 psi 0...5 psi 0...15 psi 0...30 psi 0...100 psi 0...250 psi 1.4 bar 1.4 bar 1.4 bar 3 bar 4 bar 12 bar 35 bar 35 bar 2 0 p si 2 0 p si 4 5 p si 6 0 p si 2 0 0 p si 5 0 0 p si Full-scale span2 Min. Typ. Max. 10.5 mV 20.0 mV 33.5 mV 93.0 mV 91.0 mV 69.0 mV 82.0 mV 133.0 mV 14.7 mV 47 mV 97 mV 97 mV 95 mV 143 mV 12.0 mV 24.0 mV 36.0 mV 97.0 mV 97.0 mV 72.0 mV 87.0 mV 140.0 mV 16.7 mV 50 mV 100 mV 100 mV 100 mV 150 mV 13.6 mV 27.0 mV 38.5 mV 100.0 mV 100.0 mV 76.0 mV 92.0 mV 147.0 mV 18.7 mV 53 mV 103 mV 103 mV 105 mV 157 mV PERFORMANCE CHARACTERISTICS (Vs = 10.0 ± 0.01 V, tamb = 25 °C, p2 > p1) Characteristics Zero pressure offset devices up to 2 bar/30 psi all other devices Temperature effects (0 to 50 °C)4 Offset devices up to 1 bar/15 psi 2 bar/30 psi devices all other devices Span 50 mbar, 100 mbar/1 psi devices all other devices 3 Non-linearity (BSL) devices up to 1 bar/15 psi 250 mbar/5 psi devices 2 bar/30 psi devices 5 bar, 10 bar/100 psi devices 16 bar/250 psi devices Repeatability and hysteresis5 Long term stability7 Input impedance Output impedance Response time6 Min. Typ. -0.75 -2.0 5.5 1.5 Max. Unit +0.75 +2.0 ±0.5 ±0.75 ±1.0 ±1.0 ±0.5...±1.0 ±0.25 ±0.4 ±0.1 ±0.4 ±0.5 ±0.2 ±0.5 7.5 2.5 ±1.0 ±1.5 ±2.0 ±2.0 ±1.5 ±0.5 ±0.5 ±0.2 ±0.6 ±0.7 11.5 3.0 1.0 mV % sp a n kΩ ms E / 11703 / C www.sensortechnics.com RPO Series Compensated and calibrated pressure sensors OUTLINE DRAWINGS10 RPO...G6A (single inline pinning, 1 x 4), gage pressure devices 12,7 Ø 6,4 7,9 Ø 5,1 Ø 1,93 2,29 4 x 1,02 3 x 2,54 P2 1,78 4 x 0,41 16,2 9,1 21,8 NOM 15,2 PIN 1 Ø 1,27 third angle projection 4 3 2 1 mass: 2 g dimensions in mm 12,7 RPO...G2A (dual inline pinning, 2 x 2), gage pressure devices 12,7 PIN 3 PIN 4 Ø 6,4 7,9 Ø 5,1 Ø 1,93 PIN 1 PIN 2 P2 16,2 9,1 21,8 27,9 Ø 1,27 4 x 0,5 4 x 1,02 5,1 mass: 2 g 12,7 4 x 0,41 8,4 third angle projection dimensions in mm E / 11703 / C www.sensortechnics.com RPO Series Compensated and calibrated pressure sensors OUTLINE DRAWINGS10 RPO...D6A (single inline pinning, 1 x 4), differential pressure devices 12,7 Ø 6,4 Ø 1,93 PIN 1 Ø 1,27 3 x 2,54 NOM 15,2 7,9 Ø 5,1 2,29 P2 1,78 4 x 0,41 16,2 9,1 34,4 21,8 4 x 1,02 11,7 4 3 2 1 third angle projection P1 mass: 2 g 12,7 dimensions in mm Specification notes: 1. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. 2. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. 3. Non-linearity refers to the Best Straight Line fit, measured for offset pressure, full scale pressure and 1/2 full scale pressure. 4. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. 5. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant). Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). 6. Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. 7. Long term stability of offset and span over a period over one year. 8. The sensors might be used on both ports for media compatible with the components specified under "Media Compatibility". 9. Other sealing materials are available on request. Minimum order quantities might be required. 10. Other pressure port styles, like barbed ones, luers, modular, M5, needle style or flow through connection, are available on request. Minimum order quantities might be required. E / 11703 / C www.sensortechnics.com RPO Series Compensated and calibrated pressure sensors ORDERING INFORMATION - AVAILABLE LISTINGS Note: Preferred listings are highlighted in grey Pressure range 50 mbar Gage pressure Differential pressure Single inline pinning Dual inline pinning Single inline pinning RPOM050G6A RPOM050G2A RPOM050D6A 100 mbar RPOM100G6A RPOM100G2A RPOM100D6A 250 mbar RPOM250G6A RPOM250G2A RPOM250D6A 1 bar RPOB001G6A RPOB001G2A RPOB001D6A 2 bar RPOB002G6A RPOB002G2A RPOB002D6A 5 bar RPOB005G6A RPOB005G2A RPOB005D6A 10 bar RPOB010G6A RPOB010G2A RPOB010D6A 16 bar RPOB016G6A RPOB016G2A RPOB016D6A 1 p si RPOP001G6A RPOP001G2A RPOP001D6A 5 p si RPOP005G6A RPOP005G2A RPOP005D6A 1 5 p si RPOP015G6A RPOP015G2A RPOP015D6A 3 0 p si RPOP030G6A RPOP030G2A RPOP030D6A 6 0 p si - - - 1 0 0 p si RPOP100G6A RPOP100G2A RPOP100D6A 2 5 0 p si RPOP250G6A RPOP250G2A RPOP250D6A Sensortechnics PRO services: · Extended warranty period of 2 years · Improved performance characteristics · Custom product modifications and adaptations even for small quantities · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11703 / C www.sensortechnics.com