BL600 B L 6 0 0 L I T H I U M - I O N FA S T CHARGERS B L 6 0 0 L I T H I U M - I O N FA S T CHARGERS BVL Number of Cells Volts DC Fast Charge Maximum Ault Part No. Thermistor Required • 100-250 VAC BL600-*-02-170-00-03K No 2 8.4 1.7 • In Case IEC 320 BL600-*-03-314-00-03K No 3 12.6 1.4 • LED Indicators BL600-*-04-100-00-03K No 4 16.8 1.0 • Charges Li-Ion Batteries BL600-*-02-170-00-21K Yes 2 8.4 1.7 • Optimizes Battery Life BL600-*-03-314-00-21K Yes 3 12.6 1.4 • Meets Safety Agency Requirements BL600-*-04-100-00-21K Yes 4 16.8 1.0 • Complies with EMI-RFI Regulations • Impact Resistant Polycarbonate Enclosure • Private Label Marking Available • 3 Year Warranty • Modified and Custom Designs Also Available **Current Amps **Available Current Rating 2 Cell 0.10 to 1.70A 3 Cell 0.10 to 1.40A 4 Cell 0.10 to 1.00A Ault AultPart PartNo. No.Key Key BL600 * Product Family Name 02 Denotes Number Safety Timer of Cells (with or without thermistors) 170 A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc. 00 Fast Charge Denotes standard Current/Amps or custom requirements 03 K Connector Manufacturing Location BL600 B L 6 0 0 L I T H I U M - I O N FA S T CHARGERS Input Environmental Voltage 100-250 VAC -10%, +6% Operating Temperature 0º to 40º C with no derating Line Frequency 47 - 63 Hz Storage Temperature -30º to +85º C Current 0.80A - 0.35A (lower with higher voltage) Relative Humidity 5% to 95% non-condensing Protection Internal primary current fuse Inrush limiting Short circuit protection Altitude 0-10,000 feet Cooling Convectional - non vented case Mechanical Electrical Case and Dimensions LP6 - Desktop 4.22L x 2.60W x 1.53H (in) 107L x 66W x 38H (mm) Complies with EMC Directives Case Material Black 94V0 polycarbonate CE CE Compliant Weight 8 ounces, 224 grams (excluding cord) MTBF 100,000 calculated hours Cords and Connectors MTBF 100,000 calculated hours Protection Output current limiting Short circuit protection 6 ft., 2 conductor, 20 AWG, Ault #3 connector and 6 ft., 3 conductor, 20 AWG Ault #21 connector. Other connectors are also available. Topology Switching - DC battery charger Dielectric Withstand 3000 VAC, 4243 VDC primary- secondary EMI Charger Timers Available for 2, 3, and 4 Cell (*from pg. 1) Safety Approvals Agency Listings CULus1950; TUV EN60950, CE Input Configuration 1 = 3 hr/no thermistor 5 = 3hr hr/ thermistor 2 = 6 hr/no thermistor 6 = 6hr hr/ thermistor 3 = 9 hr/no thermistor 7 = 9hr hr/ thermistor Please specify the Charger Timer Code in your order Connectors IEC320 w/ground C14 (F) Configuration: In Case IEC320 with ground LED Indicators Charge 80% No Charge Completion Abnormal Battery Led1 (Yellow) ON ON OFF Blink OFF Led2 (Green) ON ON Blink OFF OFF Other Connectors are available by special order A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc.