MW122 M E D I C A L 1 2 0 W AT T S E R I E S MW122 SWITCH-MODE P O W E R S U P P LY MW122 Ault Part No. Voltage DC Max Amps Max Watts • 100-240 VAC Universal Input MW122RA12XXF01 12V 10 120 • Desktop Style MW122RA24XXF01 24V 5 120 • Single Output to 120W • Regulated Output With Low Ripple • Meets Medical Safety Agency Requirements • Complies With EMI/RFI Regulations • CE Compliant • Impact Resistant Polycarbonate Enclosure • Private Label Marking Available • 3 Year Warranty • Modified and Custom Designs Also Available Ault AultPart PartNo. No.Key Key MW122 R A 12 XX __ 01 Product Family Name Design Revision Changes Voltage DC Connector #51 - Standard for12V model; Connector #3 -Standard for 24V model. Input Configuration/ Model Type (see pg. 2) Standard (no modifications, special artwork or special packaging) Manufacturing Location (volume dependent) A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2004 Ault Inc. MW122 M E D I C A L 1 2 0 W AT T S E R I E S Input Electrical Rated Voltage 100-240 VAC +/–10% Efficiency 86% Typical Operating Voltage 90-264 VAC Dielectric Withstand Line Frequency 47-63 Hz 4000 VAC, 5600 VDC primary-secondary 1500 VAC, 2150 VDC primary-ground 500 VDC secondary-ground Current 2A max. at 90 VAC input EMI Complies with EMC Directives Protection Dual internal primary current fuse CE CE Compliant Power Factor Correction Provided Complies with EN61000-3-2 and EN61000-3-3 MTBF Min. 100,000 Hours Environmental Output Operating Temperature 0º to 40ºC with no derating Combined Line and Load Voltage Regulation ±1% excluding cord Storage Temperature -30º to +85ºC Ripple mVp-p 1% max Relative Humidity 5% to 95% non-condensing Transient Response 0.5 msec. for 50% load change typical Altitude 0-10,000 feet Holdup Time 16 msec min. over entire input range Cooling Convectional - non vented case Protection Overcurrent protection. Short circuit protection. Cord and Connector 12V: 5 ft., 4 conductor, 18AWG, #51 connector, Pinout Pins 1-4 = +V. 3,6 = common with overmolded Ferrite core. 24V: 5 ft., 2 conductor, 18AWG, with overmolded Ferrite core, #03 connector, center positive. Mechanical Case and Dimensions 9.0L x 2.9W x 2.0H (in) 229L x 74W x 51H (mm) Case Material Black 94V0 polycarbonate Weight 24 ounces, 684 grams (excluding cord) Safety Approvals Agency Listings cURus2601, TUV/IEC EN60601-1 Connector Input Configuration IEC320 w/ground C14 (F) w Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order Pinout Code Molded Mini Fit Receptacle Description Overmolded by Ault 6 pos, Molex 39-012060 max. wire 18AWG or equivalent Suggested Mating Plug Molex 39-01-2060 or 3063 Other Connectors are available by special order A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2004 Ault Inc.