MS-225-3 S W I T C HI N G T HE S M A R T WAY MS-225-3 Miniature Reed Sensor M5 metal thread Electrical Characteristics @ 25 °C Contact form Features A W / VA 10 VDC 180 VAC 130 Switching current max. A 0.7 Carry current max. A 1 Breakdown voltage min. VDC 200 Total resistance max. (initial) mΩ 150 Ω 10 9 Contact rating max. Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Pull in range available AT 4 TC - 010 Customized types available Approvals 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Various sensitivity ranges available @ 25 °C Test coil ± AT Metal housing with M5 thread 10 - 25 Drop out min. Test equipment tolerance Adjustable switching point @ 25 °C Hz 500 Resonant frequency typ. Hz 5000 Operate time max. (incl. bounce) ms 0.5 Release time max. ms 0.3 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 20 Shock (1/2 sin 11 ms) g 100 Environmental Characteristics Dimensions in mm Ordering Information Packing Unit 50 pcs Weight per piece 3.9 g Weight per package 210 g C I P © H b m G Standard AT Ranges 1= 10 to 15 AT 2= 15 to 20 AT 3= 20 to 25 AT Ordering Example MS-225-3-2 describes MS-225-3 with 15 to 20 AT. Page 1 of 2 Rev.: 2.2 ms2253_ds_e_2.2 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com MS-225-3 S W I T C HI N G T HE S M A R T WAY MS-225-3 Miniature Reed Sensor M5 metal thread Material Information Colour Material Housing Brass, Nickel plated Cable UL 1061, AWG 28, 4 mm stripped and tinned black Potting compound Epoxy black Nuts Brass, Nickel plated, M5, separately packed Test Procedure of final Reed Sensor Test Parameters Test coil TC- 093 Test programs AT range Test program 1 = MS-225-3-1 2 = MS-225-3-2 3 = MS-225-3-3 Remarks When mounted onto ferromagnetic parts switching distance of MS-225-3 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Matching actuator MSM-225 available as well. Test Coil placed in vertical position Reed Sensor aligns with bottom line Reed Sensor centered in Test Coil Measured without nuts Page 2 of 2 Rev.: 2.2 ms2253_ds_e_2.2 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com