MS-108-5 S W I T C HI N G T HE S M A R T WAY MS-108-5 Mains switching Reed Sensor pitch 20.32 mm Electrical Characteristics @ 25 °C Contact form Features A W / VA 10 VDC 200 VAC 260 Switching current max. A 0.3 Carry current max. A 1.4 Breakdown voltage min. VDC 400 Total resistance max. (initial) mΩ 100 Ω 10 10 Contact rating max. Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Pull in range available AT 4 TC - 200 Customized types available Approvals 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Various sensitivity ranges available @ 25 °C Test coil ± AT Mains switch inside 15 - 30 Drop out min. Test equipment tolerance Mechanically protected @ 25 °C Hz 400 Resonant frequency typ. Hz 4000 Operate time max. (incl. bounce) ms 0.6 Release time max. ms 0.2 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 30 Shock (1/2 sin 11 ms) g 100 Environmental Characteristics Dimensions in mm Ordering Information Packing Unit 200 pcs Weight per piece 0.42 g Weight per package 90.7 g C I P © H b m G Standard AT Ranges 2= 15 to 20 AT 3= 20 to 25 AT 4= 25 to 30 AT Ordering Example MS-108-5-2 describes MS-108-5 with 15 to 20 AT. Page 1 of 2 Rev.: 1.3 ms1085_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com MS-108-5 S W I T C HI N G T HE S M A R T WAY MS-108-5 Mains switching Reed Sensor pitch 20.32 mm Material Information Material Colour Housing PA66, 25% GF black Potting compound Epoxy black Test Procedure of final Reed Sensor Test Parameters Test coil TC- 307 Test programs AT range Test program 2 = MS-108-5-2 3 = MS-108-5-3 4 = MS-108-5-4 Remarks When mounted onto ferromagnetic parts switching distance of MS-108-5 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Reed Sensor position in Test Coil Axis of Test Coil and Reed Sensor vertical Reed Sensor axially centered in Test Coil Leads of Reed Sensor fixed by test jig Page 2 of 2 Rev.: 1.3 ms1085_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone Fax +49 911 99 59 06-0 +49 911 99 59 06-99 [email protected] www.pic-gmbh.com