TVH Series • Common Mode EMI Inductors TVH Series low cost toroidal inductors designed to attenuate conductor noise (EMI) in systems Features • SMD design ideal for pick and place compatability • Manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • Meets lead free reflow level J-STD-020C • Fully RoHS compliant Electrical Specifications @ 25°C Test voltage between windings: 500 Vrms Operating temperature range: -40°C to +125°C Climatic Category: IEC68-1 40/125/56 Test frequency: Inductance measured @ 10kHz / 10mV Part Number Rated RMS Current (Amps) LN (mH ±30%) DCR (mOhm max.) SRF (MHz) Vrms "S" "T " TVH_-3.6-102 3.60 1.0 50 4 1500 SC5 TC5 TC3 Package Size TVH_-1.5-102 1.5 1.0 60 2 1500 SC3 TVH_-2.5-302 2.50 3.0 80 2.2 1500 SC5 TC5 TVH_-1.0-103 1.00 10.0 450 0.5 1500 SC3 TC3 TVH_-0.5-223 0.50 22.0 850 0.3 1500 SC3 TC3 Note: When ordering, add "S" or "T" to the basic part number to denote preferred mounting style. Example: TVHS-1.0-223 for SMD or TVHT-1.0-223 for through hole. Dimensions Type TVHT -Through Hole Mount Type TVHS - Surface Mount Suggested Pad Layout A 4 3 4 B Talema IN Date Code TVHS-xx-xx D D 4x D 0.059 x 0.177 (1.50) x (4.50) B 1 1 2 E 3 Talema IN Date Code TVHT-xx-xx D 0.059 (1.50) D D 0.035 (0.90) 2 E A E Schematic Schematic 4 Suggested Board Layout (Top view) 4 3 C 3 C Ø 0.024 x 0.138 (Ø 0.60 x 3.50) E 1 Mounting Style "S" SMD "T" TH Siz e C ode 1 2 2 D imensions - Inches ±0.010 (mm±0.25) A B C D E SC 3 0.551 (14.00) 0.630 (16.00) 0.350 max. (8.90 max.) 0.530 (13.46) 0.340 (8.64) SC 5 0.662 (16.82) 0.760 (19.31) 0.390 max. (9.90 max.) 0.660 (16.76) 0.445 (11.30) TC 3 0.551 (14.00) 0.630 (16.00) 0.327 max. (8.30 max.) 0.500 (12.70) 0.400 (10.16) TC 5 0.662 (16.82) 0.760 (19.31) 0.362 max. (9.20 max.) 0.500 (12.70) 0.500 (12.70) Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 243 3106 http://www.talema-nuvotem.com (08-13) TVH Series