ISDN SO Miniature SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Miniature Chip SMD Modules comply w ith Functional Insulation Level EN60950, UL1950 and UL1459 LP Turns LL CC RCUP RCUS VP (mH Min) Ratio (μH Max) (pF Max) (Ohms) (Ohms) (Vrms) MUJ-100A or B-XXX MUJ-103A or B-XXX 25 25 1:1:1: 1 1:1:2: 2 5 5 50 50 2.7 3.7 3.3 8.4 1500 1500 A or B A or B MUJ-105A or B-XXX 25 1:1:2.5: 2.5 5 50 5.2 10.5 1500 A or B Basic P/N + Suffix RCU (Ohms) Part Number Schematic C o mmo n Mo d e C h o k e Basic P/N + Suffix MUJ-100A-000 MUJ-100A or B-500 MUJ-100A or B-101 MUJ-100A or B-501 MUJ-100A or B-502 RCU (Ohms) LN (μH) No Choke 50 100 500 5000 RCU (Ohms) Basic P/N + Suffix MUJ-103A -000 MUJ-103A or B-500 MUJ-103A or B-101 MUJ-103A or B-501 MUJ-103A or B-502 0.4 0.5 0.4 0.8 No Choke 0.5 0.6 0.6 0.9 MUJ-105A-000 MUJ-105A or B-500 MUJ-105A or B-101 MUJ-105A or B-501 MUJ-105A or B-502 No Choke 0.7 0.9 0.8 1.5 Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 25mH minimum, line side windings in series @ 10kHz, 100mV Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mV Coupling capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Schematic Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series (Without Choke) A Standard Packaging: Tape and Reel IC Line MUJ Miniature Module 0.077 (1.96) TALEMA IN WK/YR Part Number 0.350 (8.89) 0.504 (12.80) 0.236 (6.00) 0.031 (0.80) 0.050 (1.27) 0° - 8° 0.378 0.346 (9.60) (8.80) Suggested Pad Layout 0.394 (10.60) 0.350 (8.89) 1 Surface Coplanarity will be 0.004 (0.10) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise 15 14 4 13 5 12 6 7 11 10 8 9 B A Line Pins: 0.016x0.016 (0.40 x 0.40) 16 2 3 Schematics - With Choke 0.079 (2.00) 0.189 (4.80) 1 IC Line IC 16 5 2 3 15 14 12 4 13 4 5 12 3 6 7 11 10 13 8 9 6 7 10 9 8 1 11 15 16 2 14 Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com (10-07) Communications\ISDN\MUJ Packing and Dimensions E± 0.1 Dimensions for carrier tape (Unit : mm) P2 ± 0.1 A P0 ± 0.1 T± 0.05 + 0 .1 -0 .0 D1 B0 ± 0.1 W± 0.3 F± 0.15 D0 K0 ± 0.1 A0± 0 .1 P± 0.1 A SECTION A-A Dimensions are in mm Dimensions in mm Type MUJ W F E P2 P0 D0 24.00 11.50 1.75 2.00 4.00 D1 P Ø1.50 Ø1.50 16.00 A0 B0 T K0 10.20 13.55 0.35 6.55 Reel Size 330x24 Quantity Quantity (Pcs/Reel) (Reel/Cased) 600 5/3000 Blank M /Y TALEM A IN MM J-10 0B -50 1 M /Y TALEM A IN MM J-10 0B -50 1 M /Y TALEM A IN MM J-10 0B -50 1 Reel dimensions Blank Pcs Min. 400mm Min. 160mm Drawing direction Reel Dimensions in mm Type A B C N 330 x 24 330 24 20.2 100 Outer Carton Inner Carton 335 355 50 33 35 0 5 285 Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com (10-07) Communications\ISDN\MUJ