EMD9 / UMD9N / IMD9A : Transistors

EMD9 / UMD9N / IMD9A
NPN + PNP Complex Digital Transistors (Bias Resistor Built-in Transistors) Datasheet
Outline
<For DTr1(NPN)>
Parameter
VCC
IC(MAX.)
R1
R2
Value
EMT6
UMT6
(6)
(6)
(5)
(5)
50V
100mA
10k
47k
(4)
(4)
(1)
(1)
(2)
(2)
(3)
(3)
EMD9
(SC-107C)
SMT6
UMD9N
SOT-353 (SC-88)
(4)
(5)
(6)
<For DTr2(PNP)>
(3)
Parameter
Value
VCC
50V
100mA
10k
47k
IC(MAX.)
R1
R2
(2)
(1)
IMD9A
SOT-457 (SC-74)
Inner circuit
Features
OUT
(6)
1) Both the DTC114Y chip and DTA114Y chip
in one package.
2) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external
input resistors (see inner circuit).
3) The bias resistors consist of thin-film resistors
with complete isolation to allow negative biasing
of the input. They also have the advantage of
completely eliminating parasitic effects.
4) Only the on/off conditions need to be set for
operation, making the circuit design easy.
5) Lead Free/RoHS Compliant.
IN
(5)
R1
GND
(4)
R2
DTr1
DTr2
R2
R1
(1)
GND
(2)
IN
(3)
OUT
EMD9 / UMD9N
OUT
(4)
IN
(5)
R1
DTr2
R1
Application
(3)
GND
R2
DTr1
R2
Inverter circuit, Interface circuit, Driver circuit
GND
(6)
(2)
IN
(1)
OUT
IMD9A
Packaging specifications
Basic
Reel size Tape width
ordering
(mm)
(mm)
unit (pcs)
Package
Package
size
(mm)
Taping
code
EMD9
EMT6
1616
T2R
180
8
8,000
D9
UMD9N
UMT6
2021
TR
180
8
3,000
D9
IMD9A
SMT6
2928
T108
180
8
3,000
D9
Part No.
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
1/8
Marking
2014.12 - Rev.F
Data Sheet
EMD9 / UMD9N / IMD9A
Absolute maximum ratings (Ta = 25C)
Parameter
Symbol
DTr1(NPN)
DTr2(PNP)
Unit
Supply voltage
VCC
50
50
V
Input voltage
VIN
6 to 40
40 to 6
V
Output current
IO
70
70
mA
IC(MAX.)*1
100
Collector current
Power dissipation
EMD9 / UMD9N
PD *2
IMD9A
mA
150 (Total)
mW
300 (Total)
*4
mW
Tj
150
°C
Tstg
55 to 150
°C
Junction temperature
Range of storage temperature
100
*3
Electrical characteristics(Ta = 25°C) <For DTr1(NPN)>
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Unit
VI(off)
VCC = 5V, IO = 100A
-
-
0.3
VI(on)
VO = 0.3V, IO = 1mA
1.4
-
-
VO(on)
IO / II = 5mA / 0.25mA
-
0.1
0.3
V
VI = 5V
-
-
0.88
mA
IO(off)
VCC = 50V, VI = 0V
-
-
0.5
A
DC current gain
GI
VO = 5V, IO = 5mA
68
-
-
-
Input resistance
R1
-
7
10
13
k
Resistance ratio
R2/R1
-
3.7
4.7
5.7
-
fT *1
VCE = 10V, IE = 5mA
f = 100MHz
-
250
-
MHz
Unit
Input voltage
Output voltage
Input current
Output current
Transition frequency
II
V
Electrical characteristics(Ta = 25°C) <For DTr2(PNP)>
Symbol
Conditions
Min.
Typ.
Max.
VI(off)
VCC = 5V, IO = 100A
-
-
0.3
VI(on)
VO = 0.3V, IO = 1mA
1.4
-
-
VO(on)
IO / II = 5mA / 0.25mA
-
0.1
0.3
V
VI = 5V
-
-
0.88
mA
IO(off)
VCC = 50V, VI = 0V
-
-
0.5
A
DC current gain
GI
VO = 5V, IO = 5mA
68
-
-
-
Input resistance
R1
-
7
10
13
k
Resistance ratio
R2/R1
-
3.7
4.7
5.7
-
VCE = 10V, IE = 5mA
f = 100MHz
-
250
-
MHz
Parameter
Input voltage
Output voltage
Input current
Output current
Transition frequency
II
fT
*1
V
*1 Characteristics of built-in transistor
*2 Each terminal mounted on a reference footprint
*3 120mW per element must not be exceeded.
*4 200mW per element must not be exceeded.
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
2/8
2014.12 - Rev.F
Data Sheet
EMD9 / UMD9N / IMD9A
Electrical characteristic curves (Ta = 25°C) <For DTr1(NPN)>
Fig.2 Output current vs. input voltage
(OFF characteristics)
INPUT VOLTAGE : VI(on) [V]
OUTPUT CURRENT : IO [A]
Fig.1 Input voltage vs. output current
(ON characteristics)
OUTPUT CURRENT : IO [A]
INPUT VOLTAGE : VI(off)[V]
Fig.3 Output current vs. output voltage
Fig.4 DC current gain vs. output current
70
OUTPUT CURRENT : IO [mA]
60
300A
50
250A
40
200A
30
150A
20
100A
10
50A
DC CURRENT GAIN : GI
II=
350A
Ta=25ºC
0A
0
0
5
10
OUTPUT CURRENT : IO [A]
OUTPUT VOLTAGE : VO [V]
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
3/8
2014.12 - Rev.F
Data Sheet
EMD9 / UMD9N / IMD9A
Electrical characteristic curves (Ta = 25°C) <For DTr1(NPN)>
OUTPUT VOLTAGE : VO(on) [V]
Fig.5 Output voltage vs. output current
OUTPUT CURRENT : IO [A]
Electrical characteristic curves (Ta = 25°C) <For DTr2(PNP)>
Fig.7 Output current vs. input voltage
(OFF characteristics)
INPUT VOLTAGE : VI(on) [V]
OUTPUT CURRENT : IO [A]
Fig.6 Input voltage vs. output current
(ON characteristics)
OUTPUT CURRENT : IO [A]
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
INPUT VOLTAGE : VI(off)[V]
4/8
2014.12 - Rev.F
Data Sheet
EMD9 / UMD9N / IMD9A
Electrical characteristic curves (Ta = 25°C) <For DTr2(PNP)>
Fig.9 DC current gain vs. output current
Fig.8 Output current vs. output voltage
II= 500A 450A
-70
400A
300A
-50
250A
-40
200A
-30
150A
-20
100A
DC CURRENT GAIN : GI
OUTPUT CURRENT : IO [mA]
350A
-60
Ta=25ºC
-10
50A
0
0A
0
-5
-10
OUTPUT CURRENT : IO [A]
OUTPUT VOLTAGE : VO [V]
OUTPUT VOLTAGE : VO(on) [V]
Fig.10 Output voltage vs. output current
OUTPUT CURRENT : IO [A]
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
5/8
2014.12 - Rev.F
Data Sheet
EMD9 / UMD9N / IMD9A
Dimensions (Unit : mm)
D
x
c
S A
Lp
HE
L
E
L
EMT6
A
Lp
b
A1
y S
l1
A
e1
e
S
b2
e
Pattern of terminal position areas
[Not a recommended pattern of soldering pads]
DIM
A
A1
b
c
D
E
e
HE
L
Lp
x
y
DIM
b2
e1
l1
MILIMETERS
MIN
MAX
0.45
0.55
0.00
0.10
0.17
0.27
0.08
0.18
1.50
1.70
1.10
1.30
0.50
1.50
1.70
0.10
0.30
0.35
0.10
0.10
INCHES
MIN
0.018
0.000
0.007
0.003
0.059
0.043
MAX
0.022
0.004
0.011
0.007
0.067
0.051
0.020
0.059
0.004
-
MILIMETERS
MIN
MAX
0.37
1.25
0.45
0.067
0.012
0.014
0.004
0.004
INCHES
MIN
-
MAX
0.015
0.049
-
0.018
Dimension in mm / inches
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
6/8
2014.12 - Rev.F
Data Sheet
EMD9 / UMD9N / IMD9A
Dimensions (Unit : mm)
D
A
e
c
x
Lp
L1
A3
S A
e
e1
l1
y S
A1
A
b
HE
Q
E
UMT6
S
b2
Pattern of terminal position areas
[Not a recommended pattern of soldering pads]
DIM
A
A1
A3
b
c
D
E
e
HE
L1
Lp
Q
x
y
DIM
b2
e1
l1
MILIMETERS
MIN
MAX
0.80
1.00
0.00
0.10
0.25
0.15
0.30
0.10
0.20
1.90
2.10
1.15
1.35
0.65
2.00
2.20
0.20
0.50
0.25
0.55
0.10
0.30
0.10
0.10
INCHES
MIN
0.031
0.000
MAX
0.039
0.004
0.010
0.006
0.004
0.075
0.045
0.012
0.008
0.083
0.053
0.026
0.079
0.008
0.010
0.004
-
MILIMETERS
MIN
MAX
0.40
1.55
0.65
0.087
0.020
0.022
0.012
0.004
0.004
INCHES
MIN
-
MAX
0.016
0.061
-
0.026
Dimension in mm / inches
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
7/8
2014.12 - Rev.F
Data Sheet
EMD9 / UMD9N / IMD9A
Dimensions (Unit : mm)
D
A
e
SMT6
c
L1
Lp
HE
E
Q
A3
b
x
S A
l1
A
e1
e
A1
y S
S
b2
Pattern of terminal position areas
[Not a recommended pattern of soldering pads]
DIM
A
A1
A3
b
c
D
E
e
HE
L1
Lp
Q
x
y
DIM
b2
e1
l1
MILIMETERS
MIN
MAX
1.00
1.30
0.00
0.10
0.25
0.25
0.40
0.09
0.25
2.80
3.00
1.50
1.80
0.95
2.60
3.00
0.30
0.60
0.40
0.70
0.20
0.30
0.20
0.10
INCHES
MIN
0.039
0.000
MAX
0.051
0.004
0.010
0.010
0.004
0.110
0.059
0.016
0.010
0.118
0.071
0.037
0.102
0.012
0.016
0.008
-
MILIMETERS
MIN
MAX
0.60
2.10
0.90
0.118
0.024
0.028
0.012
0.008
0.004
INCHES
MIN
-
MAX
0.024
0.083
-
0.035
Dimension in mm / inches
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
8/8
2014.12 - Rev.F
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
R1102A