AME AME8822 n General Description The AME8822 family of positive, linear regulators feature low quiescent current (30µA typ.) low dropout voltage and excellent PSRR, thus making them ideal for telecommunications and other battery applications. These rugged devices have both thermal shutdown and current limit to prevent device failure under the "Worst" operating conditions. High PSRR, 250mA CMOS LDO n Functional Block Diagram IN OUT Overcurrent Shutdown Thermal Shutdown The AME8822 is stable with an output capacitance of 1µF or larger. AMP Vref n Features Very Low Dropout Voltage Fast Turn on Time 100µS(Typ.) Guaranteed 250mA Output 30µA Quiescent Current Over-Temperature Shutdown Excellent PSRR (Typ. 65dB) Power-Saving Shutdown Mode in SOT-25, TSOT-25A, SOT-23, TSOT-23A, SC-70-5 Packages l Low Temperature Coefficient l Green Products Meet RoHS Standards. l l l l l l l R1 EN R2 GND n Typical Application IN EN AME8822 OUT IN OUT GND C1 1µF C2 1µF n Applications l l l l Rev.G.02 Instrumentation Portable Electronics Wireless Devices PC Peripherals IN IN AME8822 OUT OUT GND C1 1µF C2 1µF 1 AME AME8822 High PSRR, 250mA CMOS LDO n Pin Configuration SOT-25/TSOT-25A Top View 5 4 AME8822 1 2 3 SOT-23/TSOT-23A Top View AME8822AEEV 1. IN 2. GND 3. EN 4. NC 5. OUT * Die Attach: Conductive Epoxy 3 AME8822 1 AME8822AEET 1. GND 2. OUT 3. IN 2 * Die Attach: Non-Conductive Epoxy SC-70-5 Top View 5 4 AME8822 1 2 3 AME8822AEIV 1. IN 2. GND 3. EN 4. NC 5. OUT * Die Attach: Conductive Epoxy 2 Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Pin Description Pin Number Pin Name Pin Description SOT-23 / TSOT-23A SOT-25 / TSOT-25A 3 1 IN 1 2 GND N/A 3 EN Enable pin. When pulled low, the PMOS pass transistor turns off, current consuming less than 1mA. N/A 4 NC No Connection. 2 5 OUT LDO voltage regulator output pin. It should be decoupled with a 1mF or greater value low ESR ceramic capacitor. Rev.G.02 Input voltage pin. It should be decoupled with 1mF or greater capacitor. Ground connection pin. 3 AME AME8822 High PSRR, 250mA CMOS LDO n Ordering Information AME8822 x x x x xxx x Special Feature Output Voltage Number of Pins Package Type Operating Ambient Temperature Range Pin Configuration Pin Configuration A: 1. (SOT-25) 2. (TSOT-25A) 3. 4. 5. IN GND EN NC OUT A: 1. GND 2. OUT (TSOT-23A) 3. IN (SOT-23) A: 1. 2. 3. 4. 5. (SC-70-5) 4 IN GND EN NC OUT Operating Ambient Temperature Range Package Type E: -40OC to +85OC E: SOT-2X I: SC-70 Number of Pins T: 3 V: 5 Output Voltage 120: 130: 150: 180: 250: 260: 270: 280: 290: 285: 300: 310: 330: V=1.2V V=1.3V V=1.5V V=1.8V V=2.5V V=2.6V V=2.7V V=2.8V V=2.9V V=2.85V V=3.0V V=3.1V V=3.3V Special Feature Z: Lead free K: 0.9mm max height (for TSOT-2XA Only) Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Ordering Information Part Number Marking* Output Voltage Package Operating Ambient Temperature Range AME8822AEEV120Z BIWww 1.2V SOT-25 - 40oC to +85oC AME8822AEEV150Z BHKww 1.5V SOT-25 - 40oC to +85oC AME8822AEEV180Z BHLww 1.8V SOT-25 - 40oC to +85oC AME8822AEEV250Z BHMww 2.5V SOT-25 - 40oC to +85oC AME8822AEEV270Z BHQww 2.7V SOT-25 - 40oC to +85oC AME8822AEEV280Z BHNww 2.8V SOT-25 - 40oC to +85oC AME8822AEEV285Z BHUww 2.85V SOT-25 - 40oC to +85oC AME8822AEEV300Z BHOww 3.0V SOT-25 - 40oC to +85oC AME8822AEEV310Z BHRww 3.1V SOT-25 - 40oC to +85oC AME8822AEEV330Z BHPww 3.3V SOT-25 - 40oC to +85oC AME8822AEET120Z BJJww 1.2V SOT-23 - 40oC to +85oC AME8822AEET150Z BFZww 1.5V SOT-23 - 40oC to +85oC AME8822AEET180Z BFOww 1.8V SOT-23 - 40oC to +85oC AME8822AEET250Z BGAww 2.5V SOT-23 - 40oC to +85oC AME8822AEET280Z BGBww 2.8V SOT-23 - 40oC to +85oC AME8822AEET300Z BGCww 3.0V SOT-23 - 40oC to +85oC AME8822AEET330Z BGDww 3.3V SOT-23 - 40oC to +85oC AME8822AEIV150Z BJMw 1.5V SC-70-5 - 40oC to +85oC AME8822AEIV180Z BJNw 1.8V SC-70-5 - 40oC to +85oC AME8822AEIV280Z BJKw 2.8V SC-70-5 - 40oC to +85oC AME8822AEIV285Z BJLw 2.85V SC-70-5 - 40oC to +85oC Rev.G.02 5 AME AME8822 High PSRR, 250mA CMOS LDO n Ordering Information (Contd.) Part Number Marking* Output Voltage Package Operating Ambient Temperature Range AME8822AEEV130Z BLDww 1.3V SOT-25 - 40oC to +85oC AME8822AEEV260Z BTUww 2.6V SOT-25 - 40oC to +85oC AME8822AEEV290Z BTVww 2.9V SOT-25 - 40oC to +85oC AME8822AEIV330Z BVJw 3.3V SC-70-5 - 40oC to +85oC AME8822AEET330K CBGww 3.3V TSOT-23A - 40oC to +85oC AME8822AEEV330K BHPww 3.3V TSOT-25A - 40oC to +85oC Note: ww represents the date code and pls refer to Date Code Rule page on Package Dimension. * A line on top of the first letter represents lead free plating such as BIWww. * y is year code and is last number of a year. Such as the year the year code of 2008 is 8. Please consult AME sales office or authorized Rep./Distributor for the availability of package type. n Absolute Maximum Ratings Parameter Maximum Unit Input Voltage -0.3 to +7 V EN Voltage -0.3 to +7 V Output Voltage - 0.3 to VIN + 0.3 V Output Current PD / (VIN - VOUT) mA ESD Classification B* Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device HBM B*: 2000V ~ 3999V 6 Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Recommended Operating Conditions Parameter Symbol Rating Unit Ambient Temperature Range TA - 40 to +85 o C Junction Temperature Range TJ - 40 to +125 o C Storage Temperature Range TSTG - 65 to +150 o C n Thermal Information Parameter Thermal Resistance (Junction to Ambient) Package Die Attach SOT-23 Non-Conductive Epoxy TSOT-23A Thermal Resistance (Junction to Case) Conductive Epoxy 260 260 331 SOT-23* 140 TSOT-23A* Non-Conductive Epoxy Conductive Epoxy TSOT-23A 81 N/A 400 Non-Conductive Epoxy 400 PD SOT-25 TSOT-25A C/W 81 SC-70-5* SOT-23 o 140 θJC SOT-25* Unit 280 SC-70-5 TSOT-25A* Internal Power Dissiption Maximum 280 θJA SOT-25 TSOT-25A Symbol Conductive Epoxy SC-70-5 Maximum Junction Temperature Lead Temperature (Soldering 10 Sec)** 400 mW 400 300 150 o C 260 o C * Measure θJC on backside center of molding compund if IC has no tab. ** MIL-STD-202G 210F Rev.G.02 7 AME AME8822 High PSRR, 250mA CMOS LDO n Electrical Specifications VOUT(nom) > 2.0V, VIN=VOUT(nom)+0.5V; VOUT¡Ø2V, VIN=2.5V, VEN=VIN, TJ = -40 to 125OC,CIN=COUT=1mF, unless otherwise noted. Parameter Input Voltage Symbol Test Condition VIN Output Voltage Accuracy V OUT(nom) o V DROPOUT ILIM Short Circuit Limit ISC Quiescent Current IQ Line Regulation (See Note 2) REGLINE REGLOAD Note1 5.5 V 1.5 IOUT=1mA TJ =-40 to +125oC -3 3 VOUT=VOUT(nom) -2%VOUT(nom) VOUT>2.0V 300 % 500 mV V OUT<=2.0V V DROPOUT=2.5V-VOUT VOUT=0.8xVOUT(nom) V OUT=0V V OUT<=2V, VIN =3.5V VIN =5V 1mA<IOUT<250mA TA=25oC 350 TA=25oC 200 TA=25oC 30 45 0.1 0.25 IOUT=1mA, V OUT>2.0V TA=25oC -0.25 VIN =VOUT +0.5V to VIN =5.5V TJ =-40 to +125oC -0.4 IOUT=1mA, VOUT<=2.0V TA=25oC -0.4 VIN =2.5V to VIN =5.5V TJ =-40 to +125oC -0.6 IOUT = 1 to 250mA V IN =VOUT +0.5V V OUT<=2.0V VIN =2.5V -0.02 500 mA 0.4 0.2 0.4 µA %/V 0.6 0.0025 0.02 %/mA -0.04 0.004 0.04 Over Temperature Shutdown OTS IOUT=0mA 160 o C Over Temperature Hysterisis OTH IOUT=0mA 40 o C VOUT Temperature Coefficient TC Power Supply Ripple Rejection 8 Units -1.5 VOUT>2.0V Load Regulation (See Note 3) Max TA=25 C IOUT=250mA Current Limit Typ IOUT=1mA IOUT=250mA Dropout Voltage (See Note 1) Min PSRR VOUT=3.3V, IOUT=100mA, COUT=10µF, VIN =VOUT+1V, f=1kHz 30 ppm/oC 65 dB Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Electrical Specifications (Contd.) Parameter Symbol Test Condition eN f=10Hz to 100kHz, IOUT=10mA VENH VOUT>=VOUT(min) 1.4 V IN V VENL V OUT<=0.2V 0 0.3 V Enable Input Bias Current* IEN VIN =5V, EN=0V or 5V 0.01 1 µA Shutdown Supply Current* ISD V IN =5V, V EN =0V 0.5 1 µA Shutdown Output Voltage* V O,SD IOUT=1mA 0.2 V Output Voltage Noise Enable Input Threshold* Min Typ Max 40 Units µVrms Note 1. If VOUT(NOM)>2.0V, VIN(MIN)=VOUT(NOM)+VDROPOUT. If VOUT(NOM) <=2.0V, VIN(MIN)=2.5V ∆VOUT × 100% ∆V IN Note 2. Line Regulation = VOUT ∆VOUT × 100% VOUT Note 3. Load Regulation = ∆I (mA) * These parameters are applicable to part numbers with enable function. Rev.G.02 9 AME AME8822 High PSRR, 250mA CMOS LDO n Detailed Description The AME8822 family of CMOS regulators contain a PMOS pass transistor, voltage reference, error amplifier, over-current protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and thermal shutdown circuits become active when the junction temperature exceeds 150oC, or the current exceeds 250mA. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 130oC. The AME8822 switches from voltage mode to current mode when the load exceeds the rated output current. This prevents over-stress. External Capacitors The AME8822 is stable with an output capacitor to ground of 1µF or larger. Ceramic capacitors have the lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the highest ESR, resulting in the poorest AC response. A second capacitor is recommended between the input and ground to stabilize VIN. The input capacitor should be at least 1µF to have a beneficial effect. Enable The Enable Pin is normally pull-high. When activated pulled low, the PMOS pass transistor shuts off, and all internal circuits are powered down. In this state, the stand by current is less than 1µA. This pin can’ t be floating. 10 Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Characterization Curve Dropout Voltage vs Temperature Output Impedance vs Frequency 2.0 700 VIN=2.8V, IOUT =250mA 650 1.8 Output Impedance (Ω) Dropout Voltage (mV) 600 550 500 450 400 350 300 250 200 150 100 1.6 1.4 1.2 1.0 IOUT =50mA 0.8 0.6 0.4 IOUT =100mA 0.2 50 0 -40 -25 -10 5 20 35 50 65 80 95 0.0 10 110 125 100 1000 Temperature ( C) Output Voltage vs Load Current 1.815 Output Voltage (V) Output Voltage (V) 1.810 1.805 1.800 1. 795 1.790 1.810 1.805 IOUT =250mA 1.800 1.795 1.785 VIN =2.8V 50 100 150 200 250 1. 790 -40 -25 -10 5 20 35 50 65 80 95 Load Current (mA) Temperature (oC) Load Transient Response Line Transient Response Outpuv Voltage (mV) Outpuv Voltage Inpuv Voltage (mV) (V) Outpuv Current (mA) 0 Time (µS) Rev.G.02 1000000 IOUT =1mA VIN=2.8V 1.815 100000 Output Voltage vs Temperature 1.820 1.780 10000 Frequency (Hz) o 110 125 5.3 4.3 20 -20 Time (µS) 11 AME AME8822 High PSRR, 250mA CMOS LDO n Characterization Curve (Contd.) Quiescent Current vs Temperature Rising Time 40 Quiescent Current 35 3.8V 30 25 3.3V 20 EN 15 10 5 0 -40 VOUT -25 -10 5 20 35 50 65 Temperature (oC) 12 80 95 110 125 20µS/Div Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Date Code Rule For SOT-23/TSOT-23A/SOT-25/TSOT-25A Package Only Marking Date Code Year A A A W W xxx0 A A A W W xxx1 A A A W W xxx2 A A A W W xxx3 A A A W W xxx4 A A A W W xxx5 A A A W W xxx6 A A A W W xxx7 A A A W W xxx8 A A A W W xxx9 Date Code Year For SC-70 Package Only Marking w: Work Week Code A A A W xxx0 A: 01&02 K: 21&22 U: 41&42 A A A W xxx1 B: 03&04 L: 23&24 V: 43&44 A A A W xxx2 C: 05&06 M: 25&26 W: 45&46 A A A W xxx3 D: 07&08 N: 27&28 X: 47&48 A A A W xxx4 E: 09&10 O: 29&30 Y: 49&50 A A A W xxx5 F: 11&12 P: 31&32 Z: 51&52 A A A W xxx6 G: 13&14 Q: 33&34 A A A W xxx7 H: 15&16 R: 35&36 A A A W xxx8 I: 17&18 S: 37&38 A A A W xxx9 J: 19&20 T: 39&40 Rev.G.02 13 AME AME8822 High PSRR, 250mA CMOS LDO n Tape and Reel Dimension SOT-23 P0 W AME AME PIN 1 P Carrier Tape, Number of Components Per Reel and Reel Size Package Carrier Width (W) Pitch (P) Pitch (P0) Part Per Full Reel Reel Size SOT-23 8.0±0.1 mm 4.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm TSOT-23A P0 W AME AME PIN 1 P Carrier Tape, Number of Components Per Reel and Reel Size 14 Package Carrier Width (W) Pitch (P) Pitch (P0) Part Per Full Reel Reel Size TSOT-23A 8.0±0.1 mm 4.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Tape and Reel Dimension (Contd.) SOT-25 P0 W AME AME PIN 1 P Carrier Tape, Number of Components Per Reel and Reel Size Package Carrier Width (W) Pitch (P) Pitch (P0) Part Per Full Reel Reel Size SOT-25 8.0±0.1 mm 4.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm TSOT-25A P0 W AME AME PIN 1 P Carrier Tape, Number of Components Per Reel and Reel Size Package Carrier Width (W) Pitch (P) Pitch (P0) Part Per Full Reel Reel Size TSOT-25A 8.0±0.1 mm 4.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm Rev.G.02 15 AME AME8822 High PSRR, 250mA CMOS LDO n Tape and Reel Dimension (Contd.) SC-70-5 P0 W AME AME PIN 1 P Carrier Tape, Number of Components Per Reel and Reel Size 16 Package Carrier Width (W) Pitch (P) Pitch (P0) Part Per Full Reel Reel Size SC-70-5 8.0±0.1 mm 4.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Package Dimension SOT-23 Top View Side View D SYMBOLS E H L e PIN 1 MILLIMETERS MIN MAX MIN MAX A 0.90 1.40 0.0354 0.0551 A1 0.00 0.15 0.0000 0.0059 b 0.30 0.50 0.0118 0.0197 D 2.70 3.10 0.1063 0.1220 E 1.40 1.80 0.0551 0.0709 1.90 BSC e H Front View 2.40 A 3.00 0 o 0.0945 0.1181 0.0138 BSC 10 o 0o 10 o A1 θ1 0.0748 BSC 0.35BSC L b INCHES TSOT-23A D b L 0. 25 E E1 PIN1 e c e1 SIDE VIEW TOP VIEW A1 A A2 REAR VIEW Rev.G.02 17 AME AME8822 High PSRR, 250mA CMOS LDO n Package Dimension (Contd.) SOT-25 Top View Side View D E H L S1 PIN 1 e A1 A Front View b TSOT-25A D b L 0.25 E E1 PIN 1 e c e1 TOP VIEW SIDE VIEW A1 A A2 REAR VIEW 18 Rev.G.02 AME High PSRR, 250mA CMOS LDO AME8822 n Package Dimension SC-70-5 Top View Side View 0.15(.006) D C D e1 A Detail A A E/2 E1/2 E E1 0.15(.006) C . 15(0059 ) H GAGE PLANE PIN 1 L e B See Detail A .10(0.04) SECTION A-A b M C A B (b) b1 Front View A2 c1 A c SEATING PLANE BASE METAL 0.15(.006) C A1 SYMBOLS C MILLIMETERS MIN MAX MIN MAX A 0.80 1.10 0.0315 0.0433 A1 0.00 0.10 0.0000 0.0039 A2 0.80 1.00 0.0315 0.0394 b 0.15 0.35 0.0059 0.0138 b1 0.15 0.25 0.0059 0.0098 c 0.08 0.25 0.0031 0.0098 c1 0.08 0.20 0.0031 0.0079 D 1.85 2.20 0.0728 0.0866 E 1.80 2.45 0.0709 0.0965 E1 1.10 1.40 0.0433 0.0551 0.65 BSC e 0.0255 BSC e1 1.20 1.40 0.0472 0.0551 L 0.26 0.46 0.0102 0.0181 1 Rev.G.02 INCHES 0 o 4 o 8 o 10 o 0 o 8o 4 o 10o 19 www.ame.com.tw E-Mail: [email protected] Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. AME, Inc. , June 2014 Document: 1003-DS8822-G.02 Corporate Headquarter AME, Inc. 8F, 12 WenHu St., Nei-Hu Taipei 114, Taiwan . Tel: 886 2 2627-8687 Fax: 886 2 2659-2989