Part Number: XSFWCA383W SUPER FLUX LED LAMP Features Package Schematics ● High current operation for greater luminous output ● Low power consumption and thermal resistance ● Can be used with automatic insertion equipment ● RoHS Compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) FWCA (InGaN) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD 126 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 100 Electrostatic Discharge Threshold (HBM) mA °C 250 V 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds XSFWCA383W Emitting Color White Emitting Material InGaN FWCA (InGaN) Unit Forward Voltage (Typ.) (IF=30mA) VF 3.5 V Forward Voltage (Max.) (IF=30mA) VF 4.2 V Reverse Current (Max.) (VR=5V) IR 50 uA x 0.31 y 0.31 C 100 pF Luminous Flux CIE127-2007* (IF=20mA) mlm Viewing Angle 2θ 1/2 2300* 110° mW Lead Solder Temperature [2mm Below Package Base] Part Number Operating Characteristics (TA=25°C) Chromaticity Coordinates (Typ.) Capacitance (Typ.) (VF=0V, f=1MHz) Lens-color Water Clear Luminous Intensity CIE127-2007* (IF=20mA) mcd min. typ. 500* 995* 1. θ 1/2 Is the angle from optical centerline where the luminous intensity is 1/2 the optical peak value. 2. Drive current between 10mA and 30mA are recommended for long term performance. 3. Operation at current below 10mA is not recommended. 4. LEDs are binned according to their Luminous intensity. *Luminous intensity / luminous flux value is in accordance with CIE127-2007 standards. Dec 26,2013 XDSB3555 V4-Z Layout: Maggie L. P. 1/4 Part Number: XSFWCA383W SUPER FLUX LED LAMP FWCA Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or chromaticity), the typical accuracy of the sorting process is as follows: 1. Measurement tolerance of the chromaticity coordinates is ±0.01. 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Dec 26,2013 XDSB3555 V4-Z Layout: Maggie L. P. 2/4 Part Number: XSFWCA383W SUPER FLUX LED LAMP XSFWCA383W White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. Dec 26,2013 XDSB3555 V4-Z Layout: Maggie L. P. 3/4 Part Number: XSFWCA383W SUPER FLUX LED LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Dec 26,2013 XDSB3555 V4-Z Layout: Maggie L. P. 4/4