Part Number: LDGK20DLSDLCR OVAL SOLID STATE LAMP www.SunLED.com Package Schematics Features ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES D E Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) L n DGK (InGaN) Unit V u S Reverse Voltage VR 5 Forward Current IF 25 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD 102.5 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature mA 150 Electrostatic Discharge Threshold (HBM) mA mW °C 450 V Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number LDGK20DLSDLCR Operating Characteristics (TA=25°C) Green Emitting Material InGaN Unit Forward Voltage (Typ.) (IF=20mA) VF 3.3 V Forward Voltage (Max.) (IF=20mA) VF 4.1 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 515* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=20mA) λD 525* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 35 nm C 45 pF Capacitance (Typ.) (VF=0V, f=1MHz) Emitting Color DGK (InGaN) Lens-color Green Semi Diffused Luminous Intensity CIE127-2007* (IF=20mA) mcd min. typ. 1500* 2590* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 515* 100°(H) 50°(V) *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Dec 13,2013 SDSA9161 V1-Z Layout: Maggie L. P. 1/3 Part Number: LDGK20DLSDLCR OVAL SOLID STATE LAMP www.SunLED.com DGK u S L n D E Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Dec 13,2013 SDSA9161 V1-Z Layout: Maggie L. P. 2/3 Part Number: LDGK20DLSDLCR OVAL SOLID STATE LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Dec 13,2013 SDSA9161 V1-Z Layout: Maggie L. P. 3/3