Part Number: XLUGR92M

Part Number:
XLUGR92M
T-1(3mm) BI-COLOR INDICATOR LAMP
Features
z
UNIFORM LIGHT OUTPUT.
z
LOW POWER CONSUMPTION.
z
3 LEADS WITH ONE COMMON LEAD.
z
I.C. COMPATIBLE.
z
LONG LIFE - SOLID STATE RELIABILITY.
z
RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
Operating Characteristics
(TA=25°C)
UR
(GaAsP/
GaP)
UG
(GaP)
Unit
UR
(GaAsP/
GaP)
UG
(GaP)
Unit
Forward Voltage (Typ.)
(IF=20mA)
VF
2.0
2.2
V
Reverse Voltage
VR
5
5
V
Forward Current
IF
30
25
mA
Forward Voltage (Max.)
(IF=20mA)
VF
2.5
2.5
V
Forward Current (Peak)
1/10Duty Cycle
0.1ms Pulse Width
iFS
160
140
mA
Reverse Current (Max.)
(VR=5V)
IR
10
10
uA
Power Dissipation
PT
75
62.5
mW
λP
627
565
nm
Operating Temperature
TA
-40 ~ +85
Wavelength Of Peak
Emission (Typ.)
(IF=20mA)
Tstg
-40 ~ +85
Wavelength Of Dominant
Emission (Typ.)
(IF=20mA)
λD
625
568
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
Δλ
45
30
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
15
15
pF
Storage Temperature
Lead Solder Temperature
[2mm Below Package Base]
260°C For 3 Seconds
Lead Solder Temperature
[5mm Below Package Base]
260°C For 5 Seconds
Part
Number
XLUGR92M
Emitting
Color
Emitting
Material
Red
GaAsP/GaP
Green
GaP
Published Date : JAN 14, 2008
°C
Luminous
Intensity
(IF=20mA)
mcd
Lens-color
White Diffused
Drawing No : XDSA2570
Wavelength
nm
λP
min.
typ.
10
49
627
10
29
565
V4
Checked : B.L.LIU
Viewing
Angle
2 θ 1/2
60°
P.1/5
Part Number:
XLUGR92M
T-1(3mm) BI-COLOR INDICATOR LAMP
™ UR
Published Date : JAN 14, 2008
Drawing No : XDSA2570
V4
Checked : B.L.LIU
P.2/5
Part Number:
XLUGR92M
T-1(3mm) BI-COLOR INDICATOR LAMP
™ UG
Published Date : JAN 14, 2008
Drawing No : XDSA2570
V4
Checked : B.L.LIU
P.3/5
Part Number:
XLUGR92M
T-1(3mm) BI-COLOR INDICATOR LAMP
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : JAN 14, 2008
Drawing No : XDSA2570
V4
Checked : B.L.LIU
P.4/5
Part Number:
XLUGR92M
T-1(3mm) BI-COLOR INDICATOR LAMP
PACKING & LABEL SPECIFICATIONS
Published Date : JAN 14, 2008
Drawing No : XDSA2570
XLUGR92M
V4
Checked : B.L.LIU
P.5/5