SUNLED LUG12W

Part Number:
www.SunLED.com
LUG12W
T-1 3/4 (5mm) SOLID STATE LAMP
Features
z LOW POWER CONSUMPTION.
z POPULAR T-1 3/4 DIAMETER PACKAGE.
z GENERAL PURPOSE LEADS.
z RELIABLE AND RUGGED.
z LONG LIFE - SOLID STATE RELIABILITY.
z AVAILABLE ON TAPE AND REEL.
z RoHS COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
UG
(GaP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
Power Dissipation
PT
62.5
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
140
Lead Solder Temperature
[2mm Below Package Base]
260°C For 3 Seconds
Lead Solder Temperature
[5mm Below Package Base]
260°C For 5 Seconds
Part
Number
LUG12W
Emitting
Color
Green
Published Date : MAR 22, 2008
Emitting
Material
GaP
mA
mW
°C
Operating Characteristics
(TA=25°C)
Unit
Forward Voltage (Typ.)
(IF=10mA)
VF
2.0
V
Forward Voltage (Max.)
(IF=10mA)
VF
2.5
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission (Typ.)
(IF=10mA)
λP
565
nm
Wavelength of Dominant
Emission (Typ.)
(IF=10mA)
λD
568
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
Δλ
30
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
15
pF
Luminous
Intensity
(IF=10mA)
mcd
Lens-color
Water Clear
Drawing No : SDSA1580
UG
(GaP)
V4
min.
typ.
18
59
Wavelength
nm
λP
Viewing
Angle
2 θ 1/2
565
20°
Checked : B.L.LIU
P.1/4
Part Number:
www.SunLED.com
LUG12W
T-1 3/4 (5mm) SOLID STATE LAMP
™ UG
Published Date : MAR 22, 2008
Drawing No : SDSA1580
V4
Checked : B.L.LIU
P.2/4
Part Number:
www.SunLED.com
LUG12W
T-1 3/4 (5mm) SOLID STATE LAMP
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 22, 2008
Drawing No : SDSA1580
V4
Checked : B.L.LIU
P.3/4
Part Number:
www.SunLED.com
T-1 3/4 (5mm) SOLID STATE LAMP
PACKING & LABEL SPECIFICATIONS
Published Date : MAR 22, 2008
LUG12W
Drawing No : SDSA1580
LUG12W
V4
Checked : B.L.LIU
P.4/4