SunLED

Part Number: ZTHI53W
1.6X0.8mm INFRARED EMITTING DIODE
www.SunLED.com
Features
Package Schematics
● Long life and robust package
● Standard Package: 2,000pcs/ Reel
● MSL (Moisture Sensitivity Level): 3
● RoHS compliant
D
E
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
u
S
THI
(GaAlAs)
Reverse Voltage
VR
5
Forward Current
IF
50
Forward Current (Peak)
1/100 Duty Cycle
10us Pulse Width
iFS
Power Dissipation
PD
80
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
1200
L
n
Unit
V
mA
mA
mW
°C
Operating Characteristics
(TA=25°C)
ZTHI53W
Emitting
Material
GaAlAs
Lens-color
Water Clear
Unit
Forward Voltage (Typ.)
(IF=20mA)
VF
1.3
V
Forward Voltage (Max.)
(IF=20mA)
VF
1.6
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission CIE127-2007* (Typ.)
(IF=20mA)
λP
880*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
△λ
50
nm
C
90
pF
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
THI
(GaAlAs)
Radiant Intensity
CIE127-2007*
(Po=mW/sr)
@20mA
min.
typ.
0.8*
1.3*
Wavelength
CIE127-2007*
nm
λP
Viewing
Angle
2θ 1/2
880*
120°
*Radiant intensity value and wavelength are in accordance with CIE127-2007 standards.
Feb 25,2014
SDSA3659
V7-Z
Layout: Maggie L.
P. 1/4
Part Number: ZTHI53W
1.6X0.8mm INFRARED EMITTING DIODE
www.SunLED.com
™ THI
D
E
L
n
u
S
LED is recommended for reflow soldering and
soldering profile is shown below.
Feb 25,2014
SDSA3659
V7-Z
Layout: Maggie L.
P. 2/4
Part Number: ZTHI53W
1.6X0.8mm INFRARED EMITTING DIODE
www.SunLED.com
™ The device has a single mounting surface.
The device must be mounted according to
the specifications.
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
™ Reel Dimension
L
n
u
S
™ Tape Specification (Units : mm)
D
E
Remarks:
If special sorting is required (e.g. binning based on forward voltage or radiant intensity / luminous flux),
the typical accuracy of the sorting process is as follows:
1. Radiant Intensity / Luminous Flux: +/-15%
2. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters
Feb 25,2014
SDSA3659
V7-Z
Layout: Maggie L.
P. 3/4
Part Number: ZTHI53W
1.6X0.8mm INFRARED EMITTING DIODE
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
D
E
L
n
u
S
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes
Feb 25,2014
SDSA3659
V7-Z
Layout: Maggie L.
P. 4/4