Part Number: TNI30BF T-1 (3mm) INFRARED EMITTING DIODE www.SunLED.com Features Package Schematics ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant D E Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) u S TNI (GaAs) Reverse Voltage VR 5 Forward Current IF 50 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD 80 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 1200 L n Unit V mA mA mW °C Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number TNI30BF Emitting Material GaAs Lens-color Blue Transparent Operating Characteristics (TA=25°C) TNI (GaAs) Unit Forward Voltage (Typ.) (IF=20mA) VF 1.2 V Forward Voltage (Max.) (IF=20mA) VF 1.6 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 940* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 50 nm C 90 pF Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 940* 50° Capacitance (Typ.) (VF=0V, f=1MHz) Radiant Intensity CIE127-2007* (Po=mW/sr) @20mA Radiant Intensity CIE127-2007* (Po=mW/sr) @50mA min. typ. min. typ. 8 11 18 31 3* 7* 8* 14* *Radiant intensity value and wavelength are in accordance with CIE127-2007 standards. Jan 02,2014 SDSA1107 V11-X Layout: Maggie L. P. 1/3 Part Number: TNI30BF T-1 (3mm) INFRARED EMITTING DIODE www.SunLED.com TNI u S L n D E Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity / Luminous Flux: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Jan 02,2014 SDSA1107 V11-X Layout: Maggie L. P. 2/3 Part Number: TNI30BF T-1 (3mm) INFRARED EMITTING DIODE www.SunLED.com PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Jan 02,2014 SDSA1107 V11-X Layout: Maggie L. P. 3/3