Part Number: XLUG34D Features Package Schematics

Part Number: XLUG34D
T-1 (3mm) SOLID STATE LAMP
Package Schematics
Features
● Radial / Through hole package
● Reliable & robust
● Low power consumption
● Available on tape and reel
● RoHS Compliant
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
UG
(GaP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
Power Dissipation
PD
62.5
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
140
mA
mW
°C
Lead Solder Temperature
[2mm Below Package Base]
260°C For 3 Seconds
Lead Solder Temperature
[5mm Below Package Base]
260°C For 5 Seconds
Operating Characteristics
(TA=25°C)
XLUG34D
Emitting
Color
Green
Emitting
Material
GaP
Unit
Forward Voltage (Typ.)
(IF=10mA)
VF
2
V
Forward Voltage (Max.)
(IF=10mA)
VF
2.5
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission CIE127-2007*(Typ.)
(IF=10mA)
λP
565*
nm
Wavelength of Dominant
Emission CIE127-2007*(Typ.)
(IF=10mA)
λD
568*
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
△λ
30
nm
C
15
pF
Capacitance (Typ.)
(VF=0V, f=1MHz)
Part
Number
UG
(GaP)
Lens-color
Green Diffused
Luminous Intensity
CIE127-2007*
(IF=10mA)
mcd
min.
typ.
12*
24*
Wavelength
CIE127-2007*
nm
λP
Viewing
Angle
2θ 1/2
565*
60°
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Dec 06,2013
XDSA2354
V8-Z
Layout: Maggie L.
P. 1/3
Part Number: XLUG34D
T-1 (3mm) SOLID STATE LAMP
 UG
Remarks:
If special sorting is required (e.g. binning based on forward voltage,
luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Dec 06,2013
XDSA2354
V8-Z
Layout: Maggie L.
P. 2/3
Part Number: XLUG34D
T-1 (3mm) SOLID STATE LAMP
PACKING & LABEL SPECIFICATIONS
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp
Dec 06,2013
XDSA2354
V8-Z
Layout: Maggie L.
P. 3/3