Part Number: ZTNI55W-3 3.2x1.6mm INFRARED EMITTING DIODE www.SunLED.com Features Package Schematics ● Ideal for indication light on hand held products ● Long life and robust package ● Variety of lens types and color choices available ● Standard Package: 2,000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant D E Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) u S TNI (GaAs) Reverse Voltage VR 5 Forward Current IF 50 Forward Current (Peak) 1/100 Duty Cycle 10us Pulse Width iFS Power Dissipation PD 80 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 1200 L n Unit V mA mA mW °C Operating Characteristics (TA=25°C) ZTNI55W-3 Emitting Material GaAs Lens-color Unit Forward Voltage (Typ.) (IF=20mA) VF 1.2 V Forward Voltage (Max.) (IF=20mA) VF 1.6 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 940* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 50 nm C 90 pF Capacitance (Typ.) (VF=0V, f=1MHz) Part Number TNI (GaAs) Radiant Intensity CIE127-2007* (Po=mW/sr) @20mA min. typ. 5 2* 9 4.8* Water Clear Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 940* 35° *Radiant intensity value and wavelength are in accordance with CIE127-2007 standards. Jan 15,2014 SDSA3654 V8-X Layout: Maggie L. P. 1/4 Part Number: ZTNI55W-3 www.SunLED.com TNI 3.2x1.6mm INFRARED EMITTING DIODE D E L n u S LED is recommended for reflow soldering and soldering profile is shown below. Jan 15,2014 SDSA3654 V8-X Layout: Maggie L. P. 2/4 Part Number: ZTNI55W-3 3.2x1.6mm INFRARED EMITTING DIODE www.SunLED.com The device has a single mounting surface. The device must be mounted according to the specifications. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension u S Tape Specification (Units : mm) L n D E Remarks: If special sorting is required (e.g. binning based on forward voltage or radiant intensity / luminous flux), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity / Luminous Flux: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters Jan 15,2014 SDSA3654 V8-X Layout: Maggie L. P. 3/4 Part Number: ZTNI55W-3 3.2x1.6mm INFRARED EMITTING DIODE www.SunLED.com PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Jan 15,2014 SDSA3654 V8-X Layout: Maggie L. P. 4/4