New Products Indicator (Square) Ultra Bright LED Type M2P Large Square-bodied Indicators. New models added with Ultra LEDs. • New models with ultra bright LEDs added to single-screen models. • Previous models not changed. Line up of models in seven colors (the previous red, orange, green, and white models, and the new yellow, blue, and pure white models). Refer to Safety Precautions for All Pushbutton Switches/Indicators and Safety Precautions in the A3P datasheet. List of Models Model Appearance 52 max. 6.7 M2PJ (Rectangular) 25 32 52 max. 6.7 M2PA (Square) 25 25 6.4 52 max. M2PT (Round) 32 dia. 1 M2P Model Number Structure Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Display, Lamp, and Socket. For information on combinations, refer to Ordering Information on page 3. (1) (2) (3) (4) (5) M2P J - 90A 1 1 - 24A R (1) Shape of Display Symbol J A T Shape Rectangular Square Round (2) Screen Pattern Illumination-only models Symbol Screen pattern Single screen (3) Case Color Symbol 1 2 Color Black Light gray Note: M2PT model is available in light gray only. 1 (4) Lighting Method Bullet Shape Models (M2PJ and M2PA Only) Symbol 05A 12A 24A (5) Color of Display For LED Symbol R O G W Y A PW Rated voltage 5 VDC 12 VAC/VDC 24 VAC/VDC LED Lamp-lighted Models (M2PT Only) Symbol 05S 12S 24S Symbol Color Color of plate LED Color of screen 2 R Red Red Red Y Yellow Yellow Pure White G Green Green Green W White White Amber Color Red Orange Green White Yellow Blue Pure White Rated voltage DC 5V 12 VAC/VDC 24 VAC/VDC O Orange Orange Orange A Blue Blue Blue PW Pure White White Pure White M2P Ordering Information Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises the Display, Lamp, and Socket. M2PJ (Rectangular) Single-screen Models Rectangular (Single Screen) Single screen (1) Case color Black Light gray 5 VDC M2PJ-90A11-05A(1) M2PJ-90A12-05A(1) 12 VAC/DC M2PJ-90A11-12A(1) M2PJ-90A12-12A(1) 24 VAC/DC M2PJ-90A11-24A(1) M2PJ-90A12-24A(1) Lighting method Bullet Shape LEDs R, O, G, W, Y, A or PW Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White. Example: Red M2PJ-90A11-24A R M2PA (Square) Single-screen Models Square (Single Screen) Single screen (1) Case color Black Light gray 5 VDC M2PA-90A11-05A(1) M2PA-90A12-05A(1) 12 VAC/DC M2PA-90A11-12A(1) M2PA-90A12-12A(1) 24 VAC/DC M2PA-90A11-24A(1) M2PA-90A12-24A(1) Lighting method Bullet Shape LEDs R, O, G, W, Y, A or PW Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White. Example: Red M2PA-90A11-24A R M2PT (Round) Single-screen Models Round (Single Screen) Single screen Case color Light gray Lighting method 5 VDC (1) Lamp holder color symbol M2PT-90A12-05S(1) LED lamp 12 VAC/DC M2PT-90A12-12S(1) 24 VAC/DC M2PT-90A12-24S(1) R, O, G, W, Y, A, or PW Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White. Example: Red M2PT-90A12-24S R Accessories, Parts, and Tools The accessories, parts, and tools are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P datasheet. 3 M2P Specifications LED and Incandescent Lamp Ratings and Characteristics Ratings and characteristics are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P datasheet. Approved Standard Ratings UL (File No. E41515), CSA (File No. LR45258) LED: 24 VDC max. Incandescent lamp: 28 VAC/VDC,1.2 W max. Note: Certification has been obtained for the Indicator. For detailed information on individual products that have received certification, consult your supplier. Nomenclature Model Structure Bullet Shape LED Models (LED is built-in.) Lighting method Models Screen pattern LED lamp-lighted models (LED is not built-in.) M2PJ M2PA M2PT Single screen Single screen Single screen Example: M2PJ with Bullet Shape LED Lighting Cap (transparent) Legend plate (colored plate) Diffusion plate (translucent) LED Unit (with built-in bullet shape LEDs) Switch Block 4 M2P Dimensions (Unit: mm) M2PJ (Rectangular) Models M2PA (Square) Models 22 29.9±0.2 26.1 2.8 OMRON logo OMRON logo #110 quick connect terminal /soldered terminal #110 quick connect terminal /soldered terminal 0.5 25±0.1 22.9±0.2 18.9 43.6 6.7 32±0.1 @19.1 25±0.1 22.9±0.2 6.7 25±0.1 43.6 52 max. 52 max. M2PT (Round) Models #110 quick connect terminal/soldered terminal 22.4 28.5 dia. OMRON logo 23.8 32 dia. 24.9 dia. 6.4 43.6 52 max. Note: Use a panel thickness of 0.5 mm for tab terminals #110 and solder terminals. Terminal Connections Bullet Shape LED Models Model Rated voltage Screen pattern 5 VDC Bottom view 12 VDC Top view Bottom view 24 VDC Top view Bottom view Top view Single screen M2PJ Terminal arrangement Lighting block Bottom view Top view Terminal arrangement Lighting block Bottom view Terminal arrangement Lighting block Top view Single screen M2PA Terminal Lighting block arrangement Terminal Lighting block arrangement LED Lamp-lighted Models Model Type Round M2PT models Indicator Terminal arrangement Lighting block 5 M2P Dimensions (Unit: mm) Panel Cutout M2PJ (Rectangular) Models Classification Individual mounting (Horizontal) Multiple mounting (Horizontal) Flange mount models Individual mounting (Vertical) Multiple mounting (Vertical) Individual mounting (Horizontal) Multiple mounting (Horizontal) Barrier mount models Individual mounting (Vertical) Multiple mounting (Vertical) Note: 1. 2. 3. 4. Mounting design Panel cutout 30.5±0.3 25±0.1 23.5±0.3 32±0.1 25±0.1 1 2 32n-1.5±0.3 n Mount to long mounting plate (A3PJ-3002) before use. 32±0.1 25±0.1 32±0.1 1 2 Mount to long mounting plate (A3PJ-3002) before use. n 25n±0.5 3 min. 23.5±0.3 6 min. 30.5±0.3 25n-1.5±0.3 30.5±0.3 36.4±0.3 27 23.5±0.3 39 1 2 32.9n+3.5±0.3 n 23.5±0.3 33n+6±1 Mount to long mounting plate (A3PJ3002) before use. 34 32±0.1 34 Panel cutout spacing between rows of Units: 23.5±0.3 32n±0.5 27 Remarks 1 2 Mount to long mounting plate (A3PJ3002) before use. n 26n+6±1 29.4±0.3 30.5±0.3 For barrier mount models, refer to Accessories in the A3P datasheet. Panel cutout spacing between rows of Units: Dotted line indicates the position of each mounting barrier. 6 min. 1.3 6 min. 25.9n+3.5±0.3 30.5±0.3 n: Number of Units Recommended panel thickness: 1 to 5 mm Mount the panel before mounting the Switch Guard. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PA (Square) Models Classification Flange mount models Barrier mount models Individual mounting Mounting design 22.5±0.3 25±0.1 25±0.1 Individual mounting 27 1 Remarks Panel cutout spacing between rows of Units: 23.5±0.3 25±0.1 Multiple mounting Panel cutout 2 23.5±0.3 n 25n±0.1 33 min. 6 min. 25n-2.5±0.3 23.5±0.3 27.8±0.3 32 Panel cutout spacing between rows of Units: Dotted line indicates the position of each mounting barrier. 1.3 Multiple mounting 27 1 2 n 26n+6.5±1 23.5±0.3 6 min. 6 min. 26n+2.5±0.3 Note: 1. n: Number of Units 2. Recommended panel thickness: 1 to 5 mm 3. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PT (Round) Models 6.4 dia. R11.8+0.2 −0 29±0.3 dia. 4 min. Note: 1. Recommended panel thickness: 1 to 5 mm 2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating Safety Precautions Refer to Safety Precautions for all Pushbutton Switches/Indicators for common precautions. Read the Safety Precautions in the A3P datasheet. 6 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69-2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2013 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Printed in Japan Cat. No. A230-E1-01 0913 (0913)