DIN Fine-fit Connectors with W-shaped Pins XC5 International DIN standards; Solderless Connection Series (Fine Fit) ■ Backplane systems can be designed with ease with XC5 Connectors as conforming with DIN standards. ■ Using unique W-shaped pins, these Connectors prevent contacts from being bent or falling out. Ensures highly reliable connections. ■ Less damage to the through-holes in circuit boards. ■ The XC6-series Connectors can be used as Backplane Connectors. ■ Uses highly-reliable Twin-contact Sockets. ■ A special Press-fit Tool is available. RoHS Compliant ■ Ratings and Characteristics ■ Applicable Wrap Post Wire Sizes AWG30, AWG28, AWG26, or AWG24 (Solid wire: 0.25 to 0.51 mm dia.) Rated current 2A Rated voltage 300 VAC Contact resistance 20 mΩ max. (at 20 mV, 100 mA max.) ■ Wrap Post Length Insulation resistance 106 MΩ min. (at 100 VDC) 3 wires for the 13-mm contacts 4 wires for the 17-mm contacts Dielectric strength 1,000 VAC for 1 min (leakage current: 1 mA max.) ■ Ratings for Fine-fit Connectors Total insertion force 0.59 N max. per contact Rated current 2A Removal force 0.15 N max. (with test gauge, t = 0.56 mm) Contact resistance 5 mΩ max. (at 20 mV, 100 mA max.) Insertion durability 200 times 196 N max. per contact Ambient operating temperature Operating: −55 to 125°C (with no icing) Pressure input Holding force 44.1 N min. Unit torque durability 0.022 N-m min. ■ Materials and Finish At 10 to 2,000 Hz, 1.52-mm amplitude, or 15 G will not interrupt current for more than 1 µ sec. Shock At 100 G, will not break current for more than 1 µ sec. Type Plugs Housings Fiber-glass reinforced PBT resin (UL94V-0)/gray Contacts Mating (See note.) end Copper alloy/nickel base, 0.4-µm gold plating ■ Applicable Fine-fit Boards Fine fit Copper alloy/nickel base, gold flash plating • Width 1.6 to 3.2 mm Terminal Copper alloy/nickel base, 0.15-µm gold plating (See note.) Note: Sockets Vibration For non-standard plating specifications, contact your OMRON representative. • Through-hole diameter 1.0 ±0.08 mm (Drill diameter 1.15 ±0.05 mm) Plating: Copper 25 µm min., or solder 5 µm min. on a copper base at least 25 µm thick. • Pitch error: ±0.03 mm max. 1 XC5E Double-row Plugs, DIN Q-type, Fine-fit, W-shaped Pins ■ Dimensions (unit: mm) XC5E-@@2P-11@@ (With straight terminals) Two, 2.8 dia. Coding Key position Straight, 13 mm Mounting holes (bottom view) Straight, 4 mm Two, 2.8 dia. 1±0.08 dia. Straight, 17 mm Dimensions No. of contacts Dimensions (mm) A B 32 54.2 47.4 64 94.8 88.0 100 140.5 133.7 C F Coding Key positions (contact No.) D E 38.10 44.6 43.3 49.36 5, 12 78.74 85.2 83.9 90.00 6, 13, 20, 27 124.46 130.9 129.7 135.72 10, 20, 31, 41 ■ Ordering Information Appearance No. of Terminal type contacts Straight terminals, Straight terminals, Straight terminals, 4 mm 13 mm 17 mm 32 XC5E-322P-1140 XC5E-322P-1131 XC5E-322P-1132 64 XC5E-642P-1140 XC5E-642P-1131 XC5E-642P-1132 100 XC5E-012P-1140 --- --- Fine-fit DIN Connectors with W-shaped Pins XC5 3