Part Number: QBS-560 Broadband 32 Watt GaN Power Amplifier 700 to 2500 MHz high power, class AB design utilizing GaN technology Features o 32 Watts Typical Saturated Output Power o Microprocessor Based Control o Rugged GaN Technology o Adaptive Biasing to Promote Efficiency o Optional Forward/Reverse Power Detection o Blanking Feature Available *Similar Model Fault Monitoring Temperature Compensation Sequencing Interface Options API Technologies’ Model QBS-560 is a high power, class AB solid state amplifier which utilizes the latest GaN technology to offer broadband performance from 700 to 2500 MHz. The RFPA has an integrated, high efficiency DC to DC converter to promote operation over a wide DC input voltage range of +25 to +32 VDC; drawing 3.1 amps with a saturated gain of 37 dB, and a typical output power of 32 watts. The microprocessor based design incorporates an adaptive biasing algorithm to optimize efficiency and output power across the frequency band under varying load conditions. This rugged, high reliability GaN based amplifier is capable of performing in adverse commercial and military environments with EMI and moisture sealing, and will not be damaged operating into a 10:1 load mismatch at full rated power. Optional RF blanking controlled through an LVDS signal, and forward/reverse power detection are available upon request. Technical Specifications @ 25°C (1) Parameter Maximum Ratings Typical Min / Max 700 - 2500 MHz 800 - 2500 MHz Linear Gain 44 dB ─ PSAT Gain 37 dB ─ Output Power @ PSAT 32 watts 25 watts Min. Power Flatness @ PSAT ± 0.7 dB ± 1.0 dB Max. Power Over Temp. @ PSAT ± 1.0 dB ─ Input VSWR 1.3 :1 1.5 :1 Max. Noise Figure 6 dB 7 dB Max. 2nd Harmonic @ PSAT -18 dBc ─ 3rd Harmonic @ PSAT -30 dBc ─ Spurious Signals (non-harmonic) -60 dBc ─ +28 Volts +25 to +32 Volts 500 mA ─ 3.1 Amps 3.1 Amps 5 µs 10 µs Frequency Range DC Supply Voltage Current Draw (Quiescent) Current Draw @ PSAT Switching Time ON/OFF Package Dimensions (2) 7.98(L) x 4.59(W) x 1.55(H) inches Material Finish Storage Temperature -45°C to +100°C Operating Temperature (Case) -20°C to +80°C DC Input Voltage +32 VDC RF Input Power +23 dBm Protection VSWR Tolerance 10 :1 Case Shut Off Temperature +85°C Notes: 1. Specifications are based on measured performance in a 50Ω system. 2. Switching time pertains to an optional blanking function controlled by an LVDS signal. 6061-T6 Aluminum Alloy Clear Iridite (MIL-DTL-5541F, Class 3) Weight (no heatsink) RF Connectors 2.5 lbs (1134 grams) SMA Female (4-Hole Flange) DC Interface Connector 15 Pin D-Sub Plug Rev Date: 5/14/2014 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Part Number: QBS-560 Outline Drawing DC Power / Interface (Refer to Detail A) 15 PIN D-SUB PINOUT Pin # Signal Pin # Signal 1 28V 9 28V RTN 2 28V 10 28V RTN 3 28V 11 28V RTN 4 N/C 12 N/C 5 RESERVED 13 RESERVED 6 N/C 14 BLANKING (-) 7 BLANKING (+) 15 Chassis GND 8 Chassis GND Rev Date: 5/14/2014 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]